Abstract:Hybrid laminates consist of layers of different materials, which determine the mechanical properties of the laminate itself. Furthermore, the structure and interfacial properties between the layers play a key role regarding the performance under load and therefore need to be investigated in respect to industrial applicability. In this regard, a hybrid laminate comprised of AA6082 aluminum alloy sheets and glass and carbon fiber-reinforced thermoplastic (polyamide 6) is investigated in this study with a focus on the influence of aluminum surface treatment application on tensile and fatigue behavior. Four different aluminum surface treatments are discussed (adhesion promoter, mechanical blasting, phosphating, and anodizing), which were characterized by Laser Scanning Microscopy. After the thermal consolidation of the hybrid laminate under defined pressure, double notch shear tests and tensile tests were performed and correlated to determine the resulting interfacial strength between the aluminum sheet surface and the fiber-reinforced plastic, and its impact on tensile performance. To investigate the performance of the laminate under fatigue load in LCF and HCF regimes, a short-time procedure was applied consisting of resource-efficient instrumented multiple and constant amplitude tests. Digital image correlation, thermography, and hysteresis measurement methods were utilized to gain information about the aluminum surface treatment influence on fatigue damage initiation and development. The results show that fatigue-induced damage initiation, development, and mechanisms differ significantly depending on the applied aluminum surface treatment. The used measurement technologies proved to be suitable for this application and enabled correlations in between, showing that the hybrid laminates damage state, in particular regarding the interfacial bonding of the layers, can be monitored not just through visual recordings of local strain and temperature development, but also through stress-displacement hysteresis analysis.

Acid-base properties and modeling by quantum chemistry of adhesion interactions at the interface of thermoplastic-aluminum systems

Acoustic Softening and Residual Hardening in Aluminum: Modeling and Experiments

Adhesive properties of aluminum-containing functionalized polymer composites obtained in the process of mechano-chemical modification

Influence of Aluminum Surface Treatment on Tensile and Fatigue Behavior of Thermoplastic-Based Hybrid Laminates

Investigation of the influence of aluminum surficial water on aluminum-plastic hybrids through a combined experimental and simulation approach

Interface strength and degradation of adhesively bonded porous aluminum oxides

Influence of Physical Modification of the Adhesive Composition on the Strength Properties of Aerospace Aluminum Alloy Sheet Adhesive Joints

Correlations between adhesion and molecular interactions at buried interfaces of model polymer systems and in commercial multilayer barrier films

Effect of Metal Surface Topography on the Interlaminar Shear and Tensile Strength of Aluminum/Polyamide 6 Polymer-Metal-Hybrids

New insight into the interaction between maleic anhydride grafted polypropylene and aluminum foil converted with trivalent chromate: An experimental and DFT study

On the interfacial adhesion of fiber metal laminates using surface modified aluminum 7475 alloy for aviation industries – a study

Effects of surface chemical modifications on the adhesion of metallic interfaces. An high-throughput analysis

Adhesion Imrovement with Plasma Activation Between Aluminum Alloys

The Effect of Surface Substrate Treatments on the Bonding Strength of Aluminium Inserts with Glass-Reinforced Poly(phenylene) Sulphide

Study on the interfacial interactions and adhesion behaviors of variouspolymer-metalinterfaces in nano molding

Experimental Investigation of the Mechanical Behavior of Aluminum Adhesive Joints under Mixed-Mode Loading Conditions

An Adhesion Improvement of Low-Density Polyethylene to Aluminum through Modification with Functionalized Polymers

Characterization of the surface properties and adhesion behavior of electroplated PC/ABS using nano-indentation and scratch tests

Effect of adhesive thickness and surface roughness on the shear strength of aluminium one-component polyurethane adhesive single-lap joints for automotive applications

Effect of pretreatment on the interfacial bonding strength between modified polyolefin and aluminum foil treated with trivalent chromium chemical conversion: Experimental, quantum chemical calculations and molecular dynamics simulation

Effect of Surface Texture on the Structural Adhesive Joining Properties of Aluminum 7075 and TEPEX®