Abstract:In order to investigate the interfacial interaction in nano-CaCO3/compatibilizer/polypropylene composites, three kinds of compatibilizers, polypropylene grafted with maleic anhydride (PP-g-MAH), ethylene-octene copolymer grafted with maleic anhydride (POE-g-MAH) and ethylene-vinyl acetate copolymer grafted with maleic anhydride (EVA-g-MAH) with the same polar groups (MAH) but different backbones were used as compatibilizers. Nano-CaCO3 filled polypropylenes (PP/CC) modified by PP-g-MAH, POE-g-MAH and EVA-g-MAH were prepared by on a twin-screw extruder. In the compatibilized composites, the MAH polar groups of compatibilizers associated with the surface of nano-CaCO3 particles by polarity-polarity interaction,resulting in the formation of the core-shell structure in the composites and two interfaces were obtained: PP/compatibilizer interface and compatibilizer/CC interface. The effect of PP/compatibilizer and CC/compatibilizer interfaces on crystalline morphology, crystallization and melting behavior as well as mechanical properties of PP/CC was investigated by DSC, DMA, POM and WXRD. It was observed that the interfacial interaction between PP and CC in the PP/CC composites increased the crystallization temperature due to the heterogeneous nucleation of nano-CaCO3 particles, tensile modulus and impact strength of PP. In the compatibilized composites, the interfacial interaction between CC and compatibilizer further increased the crystallization temperature of PP. The chemical reaction between polar groups (MAH) of compatibilizer and nano-CaCO3 particles in this interface may lead to the formation of carboxylate salts with more heterogeneous nucleation. The carboxylate salts acted as a more effective nucleating agent further increases the crystallization temperature and crystallization rate of PP and induces the formation of beta-crystal of PP. However, the heterogeneous nucleation of carboxylate salts was dependent on the interfacial interaction of PP/compatibilizer interface. The high compatibilization between PP and PP-g-MAH was favor to increase the heterogonous nucleation of carboxylate salts and tensile property of PP composites, but decrease the impact strength of PP/CC. The partial compatibility between PP and POE-g-MAH had little influence on the heterogonous nucleation of carboxylate salts and tensile property, but significantly increased the impact strength of PP/CC. However, poor compatibilization between PP and EVA-g-MAH retarded the heterogeneous nucleation of carboxylate salts and decreased the impact strength of PP/CC.

Study on the interfacial interactions and adhesion behaviors of variouspolymer-metalinterfaces in nano molding

Enhanced Adhesion Properties of Polymer-Metal Interfaces via Nano-injection Molding: A Study on Molecular Kinematic Mechanisms

The polymer-metal interactive behavior in polyphenylene sulfide/aluminium hetero interface in nano injection molding

Molecular dynamics simulation study of the joining strength of different polymer‐aluminum heterointerfaces in nano‐injection molding

Enhanced Multiphase Interfacial Interaction of Impact Polypropylene Copolymer by In-Situ Introducing Polyethylene

Simulating the Replication and Entanglement of Semi-Rigid Polymers in Nano-Injection Moulding

Effect of polydopamine surface modification on the adhesive properties of nano‐injection molded metal‐polymer interfaces: A molecular dynamics simulation study

Micro-nano interfacial mechanical interlocking structure-property of the ultrasonic-assisted hot press molded polypropylene/aluminum alloy hybrid

Experimental Investigation and Molecular Dynamics Simulation on the Anti-Adhesion Behavior of Alkanethiols on Nickel Insert in Micro Injection Molding

Effect of the Polymer on the Joint Strength of Polymer/copper Hybrids Produced by Nano-Injection Molding: Comparison of Polybutylene Terephthalate and Polyphenylene Sulfide Via Experimental and Computational Methods

Reinforcement of solid-melt interfaces for semicrystalline polymers in a sequential two-staged injection molding process

Aluminum/polypropylene composites produced through injection molding

Direct Bonding of Polypropylene to Aluminum Using Molecular Connection and the Interface Nanoscale Properties

Interfacial Interaction and Joining Property of Direct Injection-Molded Polymer-Metal Hybrid Structures: A Molecular Dynamics Simulation Study

Atomistic simulation of metal-polymer adhesion

Simulative and experimental study of metal/polymer interfacial dynamic shear response

Investigation of Interface Thermal Resistance between Polymer and Mold Insert in Micro-Injection Molding by Non-Equilibrium Molecular Dynamics

Effect of Interfacial Interaction on the Demolding Deformation of Injection Molded Microfluidic Chips

Interfacial Nanoconnections and Enhanced Mechanistic Studies of Metallic Coatings for Molecular Gluing on Polymer Surfaces.

Effects of Polybutylene Terephthalate Molecular Weight and Nanostructure Size of Copper Surface on Replication Quality of Nano-Injection Molding under Practical Condition: A Molecular Simulation Study

Investigation on Interfacial Interaction in Nano-Caco3/Compatibilizer/Polypropylene Composites