Abstract:Based on an electromagnetic induction heating system that was recently developed in a previous work, an orthogonal test with three elements and nine levels was carried out to improve the heating effect of the system. This was intended to achieve a balance between the heating rate and temperature uniformity, where the electrochemical and thermal behaviors of the heated lithium-ion battery could be characterized by a high-accuracy electrochemical–thermal coupling model. This was validated against constant-current discharge and HPPC test data at room temperature and different low temperatures. Under the optimal parameter combination that was found in the orthogonal test, the battery temperature could rise to 293.15 K from 243.15 K in 494 s, with a maximum temperature rise rate of 0.133 K·s−1. The temperature difference after heating reached 4.21 K, which resulted from the heat conductivity of the battery material due to the skin depth of the battery shell and the material properties inside the battery. Due to the internal resistance, which decreased to no more than a quarter of the low-temperature level, both the usable energy and pulse power were increased more than 2.5 and 3 times, respectively. The enhancement of the energy output ability could provide a greater cruise range and improved dynamics for electric vehicles. The capacity calibration results obtained during the heating cycles indicated that there was only a 3.61% reduction in capacity retention after 120 repetitive heating cycles, which was 0.008 Ah below the normal cycle at 293.15 K, even compared with room-temperature capacity calibration, thus reducing the effect on the battery's lifetime. Therefore, the electromagnetic induction heating system with a heating strategy could achieve a beneficial compromise between the temperature rise behavior, cycle lifetime, and working ability, indicating considerable potential for the optimization of the heating effect.

Transforming rate capability through self-heating of energy-dense and next-generation batteries

Rapid Self-Heating and Internal Temperature Sensing of Lithium-Ion Batteries at Low Temperatures

Lithium Iron Phosphate Superbattery for Mass-Market Electric Vehicles

Optimal external heating resistance enabling rapid compound self-heating for lithium-ion batteries at low temperatures

Research on the Optimization of the Heating Effect of Lithium-Ion Batteries at a Low Temperature Based on an Electromagnetic Induction Heating System

Computational design and refinement of self-heating lithium ion batteries

Fast Charging of Lithium-Ion Batteries at All Temperatures.

Lithium-ion battery structure that self-heats at low temperatures

Cobalt-Doped Spinel Cathode for High-Power Lithium-Ion Batteries Toward Expanded Low-Temperature Applications

Air-exposed lithium metal as a highly stable anode for low-temperature energy storage applications

A Fast Rechargeable Lithium-Ion Battery at Subfreezing Temperatures

Low-temperature and high-rate-charging lithium metal batteries enabled by an electrochemically active monolayer-regulated interface

Moderate solvation structure of lithium ions for high-voltage lithium metal batteries at −40 oC

Dual-Halide Interphase Enabling High-Performance Lithium Metal Batteries in Wide-Temperature Range

An Ultrafast and Stable Li‐Metal Battery Cycled at −40 °C

Efficient Low-Temperature Cycling of Lithium Metal Anodes by Tailoring the Solid-Electrolyte Interphase

Solvation and Interfacial Engineering Enable -40 °C Operation of Graphite/NCM Batteries at Energy Density over 270 Wh kg-1

Empowering Low-Temperature Lithium-Sulfur Batteries: Unlocking the Potential of Transition Metal Alloy-Based Cathode Materials

Designing Advanced Lithium‐Based Batteries for Low‐Temperature Conditions

Cathode materials of metal-ion batteries for low-temperature applications