Abstract:Amassive number of lithium ion (Li-ion) batteries are used in electric vehicles and the number is still growing rapidly. Li-ion batteries are sensitive to temperature—they likely degrade in an over-cold or an over-hot environment. Battery thermal management systems (BTMSs) are designed to control the battery temperature within the optimal range between 20 and 55°C. Thermal management is one important part of battery management systems. A good BTMS allows researchers to improve the performance, extend the life, and enhance the safety of a battery. We launch this Research Topic to collect the latest technologies and design methodology on BTMSs. Three papers have been published in this issue. Yang et al. designed a semiconductor refrigeration system for a 48 V Li-ion battery pack which often operates at high discharge/charge rates, as shown in Figure 1A. A thermal model of the BTMS was also developed for this semiconductor-based BTMS. This BTMS is integrated with air cooling, limiting the maximum temperature to less than 40°C, as long as the temperature difference is less than 1.6°C. The semiconductor-based BTMS is effective when the battery temperature and discharge rate are high. Wang et al. applied a flat heat pipe (FHP) to a BTMS, utilizing the extremely high thermal dissipation ability of the FHP to remove the heat from the battery, as well as to improve the temperature homogeneity among battery cells. The BTMS structure is presented in Figure 1B. A thermal network model was also developed for this BTMS and the simulation agreed with the experiment data. The thickness, porosity, and particle diameter of a sintered wick on the thermal performance of the battery was investigated and the FHP was optimized. An FHP allows a radiator to be placed aside the battery pack as a condensation sector, making the battery pack compact. Luo et al. designed a novel direct liquid cooling BTMS. With a unique structure shown in Figure 1C, the BTMS can be used for cylindrical battery cells with water as the thermal fluid, without worrying about the potential risks of the electric conductivities of water. A numerical model was developed and validated with the system. They investigated the effects of the coolant flowrate and suggested a high flowrate (>500 mL/min) is needed for the discharge at a rate above 3C of a 20-cell module. Multiple inlets were also suggested to improve the temperature uniformity. These studies have shown new prototypes of battery cooling with semiconductors, heat pipes, and direct liquid cooling, which could provide alternatives for thermal management in commercial battery modules. Edited and reviewed by: Sheng S. Zhang, United States Army Research Laboratory, United States

Zero-Energy Nonlinear Temperature Control of Lithium-ion Battery Based on a Shape Memory Alloy

An Intelligent Thermal Management System for Optimized Lithium-Ion Battery Pack

Thermal behavior of Li electrode in all-solid-state batteries and improved performance by temperature modulation

Editorial: Advanced Battery Thermal Management Systems

Targeting the low-temperature performance degradation of lithium-ion batteries: a non-destructive bidirectional pulse current heating framework

A Review of Thermal Management and Heat Transfer of Lithium-Ion Batteries

Rapid Self-Heating and Internal Temperature Sensing of Lithium-Ion Batteries at Low Temperatures

Continuously‐Tunable and Ultrawide‐Range Thermal Regulator Based on Superaligned Carbon Nanotube Aerogels for Dynamic Thermal Management of Batteries and Buildings

An optimized internal heating strategy based on bidirectional pulsed current for lithium-ion battery at low temperature

Optimal external heating resistance enabling rapid compound self-heating for lithium-ion batteries at low temperatures

Breaking the Temperature Limit of Lithium-Ion Batteries With Carbon Nanotube-Based Electrodes and "Constructive Alliance" Electrolyte Strategy

Thermal Management of Lithium-Ion Batteries Based on Honeycomb-Structured Liquid Cooling and Phase Change Materials

Temperature consistency–oriented rapid heating strategy combining pulsed operation and external thermal management for lithium-ion batteries

Numerical study of positive temperature coefficient heating on the lithium-ion battery at low temperature

Fundamentals and Challenges of Lithium Ion Batteries at Temperatures Between −40 and 60 °C

Research on the Optimization of the Heating Effect of Lithium-Ion Batteries at a Low Temperature Based on an Electromagnetic Induction Heating System

Thermal management of lithium-ion batteries with nanofluids and nano-phase change materials: a review

Computational design and refinement of self-heating lithium ion batteries

Recent Progress in Lithium-Ion Battery Thermal Management for a Wide Range of Temperature and Abuse Conditions

Fundamentals and Challenges of Lithium Ion Batteries at Temperatures between-40 and 60 degrees C

Advanced Engineering Materials for Enhancing Thermal Management and Thermal Safety of Lithium-Ion Batteries: A Review