Abstract:Control of dust in underground coal mines is critical for mitigating both safety and health hazards. For decades, the National Institute of Occupational Safety and Health (NIOSH) has led research to evaluate the effectiveness of various dust control technologies in coal mines. Recent studies have included the evaluation of auxiliary scrubbers to reduce respirable dust downstream of active mining and the use of canopy air curtains (CACs) to reduce respirable dust in key operator positions. While detailed dust characterization was not a focus of such studies, this is a growing area of interest. Using preserved filter samples from three previous NIOSH studies, the current work aims to explore the effect of two different scrubbers (one wet and one dry) and a roof bolter CAC on respirable dust composition and particle size distribution. For this, the preserved filter samples were analyzed by thermogravimetric analysis and/or scanning electron microscopy with energy dispersive X-ray. Results indicate that dust composition was not appreciably affected by either scrubber or the CAC. However, the wet scrubber and CAC appeared to decrease the overall particle size distribution. Such an effect of the dry scrubber was not consistently observed, but this is probably related to the particular sampling location downstream of the scrubber which allowed for significant mixing of the scrubber exhaust and other return air. Aside from the insights gained with respect to the three specific dust control case studies revisited here, this work demonstrates the value of preserved dust samples for follow-up investigation more broadly.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is the influence of different dust removal technologies on the composition and particle size distribution of respirable coal dust in underground coal mines. Specifically, the research explored the influence of two different types of auxiliary scrubbers (one wet and one dry) and the Canopy Air Curtain (CAC) on the roof drill on the composition and particle - size distribution of respirable coal dust by analyzing the preserved filter samples. The main purpose of the research was to evaluate the effectiveness of these dust removal technologies in reducing miners' exposure to harmful dust and to further understand whether these technologies change the chemical composition or physical properties of the dust. ### Research Background Dust in underground coal mines not only affects miners' health but may also cause safety hazards such as explosions. Therefore, it is crucial to control the floating dust (particle size ≤ 75 μm) and respirable coal dust (particle size < 10 μm) in the mine. The National Institute for Occupational Safety and Health (NIOSH) in the United States has long been studying the effectiveness of various dust removal technologies. In recent years, NIOSH has paid special attention to the application of auxiliary scrubbers and canopy air curtains in reducing respirable dust. ### Research Methods The research used filter samples preserved from three previous NIOSH studies, which were respectively from: 1. **Wet Scrubber Study**: Conducted in "Mine A", it tested the effect of a wet scrubber in reducing floating dust and respirable dust downstream of the Continuous Miner (CM). 2. **Dry Scrubber Study**: Conducted in "Mine B", it tested the effect of a dry scrubber in reducing respirable dust downstream of the CM and the roof drill. 3. **Canopy Air Curtain (CAC) Study**: Conducted in "Mine C", it tested the effect of a third - generation CAC in reducing the concentration of respirable dust around the roof drill operator. ### Main Findings - **Wet Scrubber**: The research found that the wet scrubber was highly effective in reducing respirable dust, but had little impact on the dust composition. However, the wet scrubber seemed to reduce the average particle size. - **Dry Scrubber**: The dry scrubber also had a certain effect in reducing respirable dust, but this effect was not as consistent as that of the wet scrubber. This may be related to the air - flow mixing downstream of the dry scrubber. - **Canopy Air Curtain (CAC)**: The CAC performed excellently in protecting the roof drill operator from respirable dust exposure, but also had no significant impact on the dust composition. The CAC also reduced the average particle size. ### Conclusion Although these dust removal technologies perform well in reducing the concentration of respirable dust, they have a minor impact on the dust composition. The research also emphasizes the importance of preserving filter samples in subsequent analysis, which is of great significance for in - depth understanding of the effectiveness of dust removal technologies and improving future designs.

Effects of dust controls on respirable coal mine dust composition and particle sizes: case studies on auxiliary scrubbers and canopy air curtain

Review of Respirable Coal Mine Dust Characterization for Mass Concentration, Size Distribution and Chemical Composition

Coal Mine Dust Size Distributions, Chemical Compositions, and Source Apportionment

Respirable dust constituents and particle size: a case study in a thin-seam coal mine

Experimental Investigations and Field Applications of Chemical Suppressants for Dust Control in Coal Mines

A Laboratory Investigation of Underside Shield Sprays to Improve Dust Control of Longwall Water Spray Systems

Numerical study of coal dust behaviors and experimental investigation on coal dust suppression efficiency of surfactant solution by using wind tunnel tests

Field study results of a 3rd generation roof bolter canopy air curtain for respirable coal mine dust control

From Dust to Disease: A Review of Respirable Coal Mine Dust Lung Deposition and Advances in CFD Modeling

Prevalence of nano-sized coal mine dust in North and Central Appalachian coal mines – Insights from SEM-EDS imaging

Chemistry and particle size distribution of respirable coal dust in underground mines in Central Eastern Europe

Dispersion and migration characteristics of multisource respirable dust in development panels during tunnelling processes

Reducing enclosed cab drill operator's respirable dust exposure with effective filtration and pressurization techniques

Design of a water curtain to reduce accumulations of float coal dust in longwall returns

Advancing respirable coal mine dust source apportionment: a preliminary laboratory exploration of optical microscopy as a novel monitoring tool

Respirable Coal Mine Dust: A Review of Respiratory Deposition, Regulations, and Characterization

Open-air sprays for capturing and controlling airborne float coal dust on longwall faces

The evaluation and quantification of respirable coal and silica dust concentrations: a task-based approach

Dust concentrations and respiratory risks in coalminers: key risk estimates from the British Pneumoconiosis Field Research