Abstract:Carbon aerogel prepared using waste biomass as the carbon source can be utilized as the ideal absorption material for the remediation of oil spill accidents. However, the brittleness of the fiber and agglomeration of precursor fiber chains due to hydrogen bonding leads to poor mechanical properties and low absorption capacity of the carbon aerogel. The doping treatment used to overcome such defects still shows some deficiencies, such as high cost, cumbersome process, and part of the process involving toxicity. To overcome the agglomeration between the cellulose chains, a chemically-etched biomass-based carbon aerogel (EBCA) was prepared using pineapple cellulose nanofiber (CNF) etched by the deep eutectic solvents (DES) of choline chloride/urea under a low carbonization temperature of 400 °C. The as-prepared material, designated as EBCA-400, possesses a 3D structure with a huge BET specific surface area of 501.56 m 2 g −1 , a density of only 0.032 g cm −3 and a porosity of 97.3% with excellent elasticity performance and self-recovery performance owing to the enhancement of the surface roughness of fibers through DES etching. Also, EBCA-400 shows a superhydrophobicity with a water contact angle (WCA) of 157.6° and has a strong and fast absorption capacity for various oils in various scenarios, the absorption capacity for CCl 4 reaches 288 times its own weight, and the absorption efficiency to CCl 4 can still reach more than 97% of the maximum value even after 15 oil absorption-removal cycles. With the characteristics of very low density, huge porosity, excellent elasticity and superhydrophobicity as well as better reusability, EBCA-400 has great potential in oil spill remediation. This study provides a convenient and environment-friendly way for surface modification to improve the elasticity of carbon aerogel, which is crucial to the recovery of carbon aerogel for its reusability.

Synthesis of ultralight chitosan/activated biochar composite aerogel globules for ketoprofen removal from aqueous solution

Fabrication and adsorption mechanism of chitosan/Zr-MOF (UiO-66) composite foams for efficient removal of ketoprofen from aqueous solution

Pd loaded and covalent-organic framework involved chitosan aerogels and their application for continuous flow-through aqueous CB decontamination

Bio-based aerogel composites of coconut pith-derived carbon and chitosan for efficient anionic dye-polluted water treatment

Koh-activated biochar and chitosan composites for efficient adsorption of industrial dye pollutants

Robust self-floating covalent organic framework/chitosan aerogels for the efficient removal of sulfamerazine

Flexible fabrication chitosan-polyamidoamine aerogels by one-step method for efficient adsorption and separation of anionic dyes

Preparation of Chitosan—Graphene Oxide Composite Aerogel by Hydrothermal Method and Its Adsorption Property of Methyl Orange

Preparation of Sustainable Kapok Fiber/Chitosan Composite Aerogels with Amphiphilic and Mechanical Properties for Thermal Insulation and Packaging Applications

Self-activation of potassium/iron citrate-assisted production of porous carbon/porous biochar composites from macroalgae for high-performance sorption of sulfamethoxazole

Multifunctional Chitosan Tailored γ-Aluminum Oxy-hydroxide Monolith Aerogels for Sustained Environmental Remediation

Choline chloride/urea etched carbon fiber to improve the elasticity of biomass-based carbon aerogel for efficient oil-water separation

Preparation and hydrophobic modification of carboxymethyl chitosan aerogels and their application as an oil adsorption material

Degradable composite aerogel with excellent water-absorption for trace water removal in oil and oil-in-water emulsion filtration

Flame retardant, heat insulating and hydrophobic chitosan-derived aerogels for the clean-up of hazardous chemicals

Robust and recyclable graphene/chitosan composite aerogel microspheres for adsorption of oil pollutants from water

Fabrication of a CO2-responsive Chitosan Aerogel As an Effective Adsorbent for the Adsorption and Desorption of Heavy Metal Ions

Preparation of porous chitosan aerogels for efficient adsorption and sustained release of chlorogenic acid via enhanced water permeability

Simple fabrication of carboxymethyl cellulose and κ-carrageenan composite aerogel with efficient performance in removal of fluoroquinolone antibiotics from water

Synthesis of carbon nanotube aerogels from cross-linked polyacrylamide/chitosan hydrogels via gamma irradiation for efficient oil removal

Exploring the properties of gelatin/chitosan bioaerogel scaffolds: Toward ultra‐light and highly porous materials