Abstract:A 36 month leachable study on water for injection in direct contact within a polymer-based prefillable syringe consisting of a cyclo olefin polymer barrel, a chlorinated isoprene isobutene rubber plunger stopper, a polymer label attached on the barrel, and a secondary packaging was conducted at 25 ± 2 °C and 60 ± 5% relative humidity. Through the various comparison studies, no difference in the leachable amounts was observed between this polymer-based prefilled syringe and a glass bottle as a blank sample reference by 36 months. No influence on the leachables study outcome was noted from the printed label and/or label adhesive or from the secondary packaging. In an additional study, no acrylic acid used as the label adhesive leachable was detected by an extended storage for 45 months at 25 ± 2 °C and 60 ± 5% relative humidity as a worst case. To obtain more details, a comparison extractable study was conducted between a cyclo olefin polymer barrel and a glass barrel. In addition, chlorinated isoprene isobutene rubber and bromo isoprene isobutene rubber were compared. As a result, no remarkable difference was found in the organic extractables for syringe barrels. On the other hand, in the case of element extractable analysis, the values for the cyclo olefin polymer barrel were lower than that for the glass barrel. For the plunger stoppers, the chlorinated isoprene isobutene rubber applied in this study was showing a lower extractable profile as compared to the bromo isoprene isobutene rubber, both for organic and element extractables. In conclusion, the proposed polymer-based prefillable syringe system has great potential and represents a novel alternative that can achieve very low level extractable profiles and can bring additional value to the highly sensitive biotech drug market. Lay abstract: A 36 month leachable study on water for injection in direct contact within a cyclo olefin polymer barrel and chlorinated isoprene isobutene rubber plunger stopper that has a polymer label attached to the barrel and is wrapped into a secondary packaging was conducted at 25 °C and 60% relative humidity. Through the various comparison studies, no difference in the leachable amounts was observed between polymer-based prefilled syringes and a glass bottle as a blank sample reference by 36 months. No influences on the leachables study outcome were noted from the secondary packaging. To obtain more details, a comparison extractable study was conducted between the cyclo olefin polymer and the glass barrel. In addition, chlorinated isoprene isobutene rubber and bromo isoprene isobutene rubber plunger stoppers were compared as well. As a result, no remarkable difference was found in the organic extractables for barrels. As for element extractable analysis, the values for the cyclo olefin polymer barrel were lower than that for the glass barrel. For the plunger stoppers, the chlorinated isoprene isobutene rubber applied in this study was showing a lower extractable profile as compared to the bromo isoprene isobutene rubber, both for organic and element extractables. In conclusion, the proposed polymer-based prefillable syringe system has great potential and represents a novel alternative that can achieve very low level extractable profiles and can bring additional value to the highly sensitive biotech drug market.

Drug-Leachable Interaction Product Evaluation in Prefilled Syringe of Ganirelix Acetate Injection

Study of Leachable Compounds in Hospital Pharmacy-Compounded Prefilled Syringes, Infusion Bags and Vials

Low Leachable Container System Consisting of a Polymer-Based Syringe with Chlorinated Isoprene Isobutene Rubber Plunger Stopper

Holistic Extractables and Leachables Program: Evaluations of Prefilled Syringe Systems for Biotechnology Products

Risk Assessment of the Leachables’ Profile for Small-Molecule Pharmaceutical Drug Substances

Assessment of Patient Exposure to Leachables From Lyophilized Drug Formulations Following Reconstitution, Storage, and Administration via Polymeric Packaging/Delivery Systems

Study on extractables in disposable syringe materials

Development of a generic sample preparation method by dispersive liquid‒liquid microextractions for the monitoring of leachable compounds in hospital pharmacy-prepared prefilled drug products

Physicochemical Excipient-Container Interactions in Prefilled Syringes and Their Impact on Syringe Functionality

Development of Self-Administered Formulation to Improve the Bioavailability of Leuprorelin Acetate

Comparative Study of Sorption Phenomena Between Three Medications and Syringes Made of Cyclic Olefin Copolymer or Polypropylene

Impact of Drug Formulation Variables on Silicone Oil Structure and Functionality of Prefilled Syringe System

Identification of nonvolatile organic compounds (NVOCs) in biopharmaceuticals through non-target analysis and quantification using complexation-precipitation extraction

Safety assessment of drug impurities for patient safety: A comprehensive review

Considerations when deriving compound-specific limits for extractables and leachables from pharmaceutical products: Four case studies

In Silico Assessment of Biomolecule Reactivity with Leachables

A Real-Time NMR Method for Measurement of In Vitro Aggregation Kinetics Of Degarelix Drug Products

Assessing Abuse-Deterrent formulations utilizing Ion-Exchange resin complexation processed via Twin-Screw granulation for improved safety and effectiveness

Reactivity of N terminal Histidine of Peptides towards Excipients/Impurity of Excipients: A Case Study of Liraglutide Excipient Compatibility Study

Detection and Identification of Leachables in Vaccine from Plastic Packaging Materials Using UPLC-QTOF MS with Self-Built Polymer Additives Library

PARTICULATE MATTER FROM SYRINGES USED FOR INTRAVITREAL INJECTIONS