Abstract:The floating support friction plate plays a crucial role in the functioning of high-power hydraulic disk brakes (HDBs). When the brakes are not engaged, there is inevitably an impact between the floating friction plate and the inner hub of the HDB due to the clearance between the teeth of the spline coupling. This impact force can become excessive as the clearance expands, thereby increasing the risk of failure of the friction plate and hub teeth. However, there is a lack of an effective dynamic model that considers non-uniform clearances for the spline coupling in an HDB with floating friction plate. To address this issue, a new dynamic modeling method is proposed for HDBs with floating friction plate, which takes into account the nonlinear impact resulting from non-uniform and time-varying teeth clearances. A nonlinear dynamic model for the entire transmission system is first established, considering the presence of the floating friction plate. Subsequently, a calculation method for the impact force on floating friction plate is presented, which includes the coupling effects of tooth clearance expansion and indexing errors. Moreover, influences of clearance expansion and operating conditions on the nonlinear characteristics of the impact force and dynamic response are investigated. Finally, an experimental setup is developed to measure the impact force on the floating friction plate, thereby verifying the proposed method. The results demonstrate that the predicted impact force, based on the proposed method, closely agrees with the test data in terms of both the time domain waveform and spectrum. Consequently, it can be concluded that this paper presents an effective modeling method for HDBs with floating friction plates, enabling a thorough study of the influence of nonlinear tooth clearance impacts.

Dynamic modeling for hydraulic disk brake with floating supported friction plate considering nonlinear tooth clearance impact

Analyzing Performance of Automobile Brake Drum in 3D Thermo-elastic Coupling Field

Nonlinear characteristics of floating involute spline coupling in a hydraulic disc brake with inner hub rim crack propagation

Dynamic modeling and brake stick-slip vibration analysis of a vehicle-track system with disc-pad nonlinear frictions

Dynamic characteristics of disc brake systems of a high-speed train with wheel polygonal wear

On the Effect of Friction Law in Closed-Loop Coupling Disc Brake Model

Research on the Influence of Floating Brake Pad Structure on the Friction Interface Performance of Disk Brake

Damage mechanisms of spline teeth of friction plates under non-uniform impact

The effect of disc deformation on the dynamic response of multi-disc systems: A tilting-impact model originating from the wet clutch

Nonlinear Behavior Evolution and Squeal Analysis of Disc Brake Based on Different Friction Models

Multi-body Dynamic Modelling and Error Analysis of Planar Flexible Multilink Mechanism Considering Clearance and Thermal-mechanical Coupling Effect of the Crankshaft-bearing Structure

Numerical simulation and experimental research on mechanical behaviour of hydraulic disc brakes based on multi-body dynamics

Prediction and Optimization of the Disc Brake Squeal Performance with Altair HyperWorks and ANSYS

Influence of Two External Excitations for Brake Stick-Slip Behavior Using New Numerical Calculation Method

A coupled approach to model the effect of wear on the dynamics of the shrouded bladed disk

Tribo-dynamic modelling and analysis for a high-speed helical gear system with time-varying backlash and friction under Elastohydrodynamic Lubrication condition

Investigation on the nonlinear dynamic behaviors of water-lubricated bearings considering mixed thermoelastohydrodynamic performances

The Prediction of Braking Noise in Regenerative Braking System Using Closed-Loop Coupling Disk Brake Model

Equal heat flux loading optimization approach for uniform wear of the wet brake

A nonlinear model for dynamic performance analysis of gas foil bearing-rotor system considering frictional contacts

Dynamic modeling and analysis of hybrid driven multi-link press mechanism considering non-uniform wear clearance of revolute joints