Abstract:<math>{101¯2}</math> twins were introduced into the magnesium (Mg) plate AZ31 via pre-rolling along its transverse direction. The plates, both with and without the pre-induced <math>{101¯2}</math> twins, were subjected to uniaxial tension along different directions. Using crystal plasticity modeling, we found that the strengthening effect of the pre-induced <math>{101¯2}</math> twins on the macroscopic flow stress primarily arised from the increased slip resistance caused by the boundaries, rather than the orientation hardening due to the twinning reorientation (although the latter did make its contribution in some specific loading directions). Besides, the pre-existing <math>{101¯2}</math> twins were found, by both experiments and simulation, to promote the activity of prismatic 〈a〉 and pyramidal 〈c + a〉 in the parent matrix of the material. Further analysis showed that the enhanced non-basal slip activity is related to the <math>{101¯2}</math> twin boundaries' low micro Hall-Petch slope ratios of non-basal slips to basal slip. With the critical resolved shear stress (CRSS) obtained from crystal plasticity modeling and the orientation data from EBSD, a probability-based slip transfer model was proposed. The model predicts higher slip transfer probabilities and thus lower strain concentration tendencies at <math>{101¯2}</math> twin boundaries than that at grain boundaries, which agrees with the experimental observation that the strain localization was primarily associated with the latter. The present findings are helpful scientifically, in deepening our understanding of how the pre-induced <math>{101¯2}</math> twins affect the strength and slip activity of Mg alloys, and technologically, in guiding the design of the pre-strain protocol of Mg alloys.

Origin of profuse {11 2 ̄ 1} deformation twins in Mg-Gd alloys

Twinning-induced plasticity with multiple twinning modes and disclinations in Mg alloys

Origin of twin-like { 33 6 ̄ 4 } tilt boundary and associated solute segregation in a high strain rate deformed Mg-Y alloy

Evolution of deformation mechanisms and their orientation dependence in fine-grained Mg-3Gd during tension

Towards understanding double extension twinning behaviors in magnesium alloy during uniaxial tension deformation

Microstructure Evolution and Selection Behavior of Twin Variants of Mg-5Gd-3Y-0.5Zr Alloy during Secondary Deformation

Formation of incoherent deformation twin boundaries in a coarse-grained Al-7Mg alloy

Quantitative investigation on the {10–12} twinning-detwinning behavior and twinning transfer of an extruded Mg-2.8Y sheet during compression-tension loading via quasi-in-situ EBSD observation

The evolution of local stress during deformation twinning in a Mg-Gd-Y-Zn alloy

The Dislocation-Twin Interaction and Evolution of Twin Boundary in AZ31 Mg Alloy

Interaction between 10 1 ̄ 2 and 30 3 ̄ 4 twin in magnesium alloy

Twin-solute, twin-dislocation and twin-twin interactions in magnesium

On the strengthening and slip activity of Mg-3Al-1Zn alloy with pre-induced { 10 1 ̄ 2 } twins

Effect of pre-deformation on the activation stress of {10–12} twinning in Mg–3Al–1Zn alloy

Deformation twin nucleation and twin variant selection in single crystal magnesium as a function of strain rate

Proliferation of Twinning in HCP Metals: Application to Magnesium

Asymmetric Growth Of Tensile Twins In Magnesium

Origin of Deformation Twinning in bcc Tungsten and Molybdenum

Solute Segregation and Pinning Effect on Lateral Twin Boundary in Magnesium

Study on the Twinning/De-twining Behavior of Different Types of Twin–Twin Interaction via Experiments and Molecular Dynamics Simulation

{ 10 1 ̄ 2 } twin–twin intersection-induced lattice rotation and dynamic recrystallization in Mg–6Al–3Sn–2Zn alloy