Abstract:The works of art and artifacts that constitute our cultural heritage are subject to deterioration, both from internal and from external factors. Surfaces that interact with the environment are the most prone to aging and decay; accordingly, soiling is a prime factor in the degradation of surfaces and the attendant disfigurement of a piece. Coatings that were originally intended to protect or contribute aesthetically to an artwork should be removed if they begin to have a destructive impact on its appearance or surface chemistry. Since the mid-19th century, organic solvents have been the method of choice for cleaning painted surfaces and removing degraded coatings. Care must be taken to choose a solvent mixture that minimizes swelling of or leaching from the original paint films, which would damage and compromise the physical integrity of all the layers of paint. The use of gels and poultices, first advocated in the 1980s, helps by localizing the solvent and, in some cases, by reducing solvent permeation into underlying paint layers. Unfortunately, it is not always easy to remove gels and their residues from a paint surface. In this Account, we address the removal problem by examining the properties of three classes of innovative gels for use on artwork--rheoreversible gels, magnetic gels, and "peelable" gels. Their rheological properties and efficacies for treating the surfaces of works have been studied, demonstrating uniquely useful characteristics in each class: (1) Rheoreversible gels become free-flowing on application of a chemical or thermal "switch". For art conservation, a chemical trigger is preferred. Stable gels formed by bubbling CO(2) through solutions of polyallylamine or polyethylenimines (thereby producing ammonium carbamates, which act as chain cross-links) can be prepared with a wide range of solvent mixtures. After solubilization of varnish and dirt, addition of a weak acid (mineral or organic) displaces the CO(2), and the resulting free-flowing liquid can be removed gently. (2) Incorporation of magnetic, coated-ferrite nanoparticles into polyacrylamide gels adds functionality to a versatile system comprising oil-in-water microemulsions, aqueous micellar solutions, or xerogels that act as sponges. The ferrite particles allow the use of magnets both to place the gels precisely on a surface and to lift them from it after cleaning. (3) Novel formulations of poly(vinyl alcohol)-borate gels, which accept a range of organic cosolvents, show promise for swelling and dissolving organic coatings. This family of gels can be quite stiff but can be spread. They are non-sticky and have sufficient strength to be removed by peeling or lifting them from a sensitive surface. These three classes of gels are potentially very important soft materials to augment and improve the range of options available for conserving cultural heritage, and their interesting chemical-physical properties open a rich area for future scientific investigation.

Polyoxometalate-Ionic Liquids for Mitigating the Effects of Iron Gall Ink Corrosion on Cellulosic Supports

Rationalizing iron‐gall ink recipes from antiquity until the 19th century. A kinetic study

Polyoxometalate-Ionic Liquids (ils) and Polyvinyl Alcohol/Chitosan/ILs Hydrogels for Inhibiting Bacteria Colonising Wall Paintings.

Oxidative Degradation Mechanism and Antidegradation Strategy of Paper-Based Relics with Transition Metal Pigments: from the Cellobiose Model to Cellulose Paper

Eucalyptus bleached kraft pulp-ionic liquid inks for 3D printing of ionogels and hydrogels

Lignin-Derivative Ionic Liquids as Corrosion Inhibitors

Ionic Liquids as Reconditioning Agents for Paper Artifacts

Analysis of Iron Complexes of Tannic Acid and Other Related Polyphenols as Revealed by Spectroscopic Techniques: Implications in the Identification and Characterization of Iron Gall Inks in Historical Manuscripts.

Aging Iridium Oxide Catalyst Inks: A Formulation Strategy to Enhance Ink Processability for Polymer Electrolyte Membrane Water Electrolyzers

Degradation mechanisms of Indian banks promissory notes written in iron‐gall inks and its conservation

Innovative perspective for the cleaning of historical iron heritage: novel bio-organogel for the combined removal of undesired organic coatings and corrosion

Oxygen-Deficient Tio(2-X)Methylene Blue Colloids: Highly Efficient Photoreversible Intelligent Ink

Nanomaterials for Combined Stabilisation and Deacidification of Cellulosic Materials—The Case of Iron-Tannate Dyed Cotton

Ionic Liquid as Water Soluble and Potential Inhibitor for Corrosion and Microbial Corrosion for Iron Artifacts

Printability study of metal ion crosslinked PEG-catechol based inks

Flash Graphene and Poly(O-Methoxy Aniline) for the Composition of a Solvent-Based Conductive Ink

Putting Ink into Polyion Micelles: Full-Color Anticounterfeiting with Water/Organic Solvent Dual Resistance

New Frontiers in Materials Science for Art Conservation: Responsive Gels and Beyond

Ionic Liquids as Potential Cleaning and Restoration Agents for Cellulosic Artefacts

Application of cellulose nanofibers to remove water-based flexographic inks from wastewaters

Reducing the Risks of Hydrogen Peroxide Bleaching in Presence of Iron Ions in Paper