Abstract:Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, Ahead of Print. In this paper, to address the shortcomings of the crossing structure design based on the elastic bending center method and the lack of related research, an optimization method for high-speed turnout crossing structures was proposed based on the actual elastic deformations of point and splice rails. Based on the finite element theory, the actual loading characteristics and spatial variable section characteristics of point and splice rails were fully considered, and a refined simulation analysis model of the switching system of point and splice rails in crossing areas was established. Moreover, the elastic deformation lines of point and splice rails in the nonworking state were obtained for the first time, which were consistent with actual situations. On this basis, system optimization was performed for the connecting parts of the crossing with a movable point in a high-speed turnout. In the crossing structure simulation model, the length adjustment values of the first–sixth spacer blocks between the branch line–wing and point rails and between the mail line–wing splice rails were ≤1 mm. Moreover, the lengths of the seventh–ninth spacer blocks decreased by gradually increasing amounts, and the length of the ninth spacer block decreased the most (∼6 mm). The length of the second spacer block between the point and splice rails slightly increased, but the length of the third spacer block significantly decreased by 6 mm. The length adjustment value of the distance block between the point and splice rails was smallest (0.7 mm). The calculated optimal lengths of the connecting parts of the crossing were found to be close to the empirical values used in actual manufacturing processes, and the dimension optimization patterns were completely consistent with actual situation, which validates the proposed optimization method. Thus, the proposed method can effectively improve the coordination between rails and connecting parts in crossing areas, substantially reduce internal stresses in crossing systems, and improve their assembly performance and service life. Moreover, the proposed optimization parameters can provide valuable references for the research on next-generation high-speed turnouts (400 km/h) and for improving the designs of existing high-speed turnouts.

Stiffness Homogenization of No.12 Single Turnout with Fixed Frog and High Manganese Steel Used in 75 kg/m Rail

Three-dimensional Finite Element Simulation on Moving Load Induced Track Response over Stiffness-varied Base

The influence of elastic pads deterioration in the fastening system on the dynamic characteristics of the vehicle-turnout system

Research on the Matching of Fastener Stiffness Based on Wheel-Rail Contact Mechanism for Prevention of Rail Corrugation

Research on the influence of random stiffness of the rubber tie plate on the coupled vehicle-turnout system based on the probability density evolution method

EFFECT OF LONGITUDINAL FASTENER STIFFNESS AND FASTENING SYSTEM LOADING

Study on Reasonable Stiffness Matching for Vibration-reduction Double-block Ballastless Track

Fatigue damage analysis of the straight switch rail considering complex random loads

Numerical and Experimental Investigation of Longitudinal Rail Creep at Turnouts on Steep Ramps Under Repeated Loads Considering Realistic Braking Loads of Vehicles

Optimum Analysis of Vibration Reduction Performance for Floating Slab Track Based on Shear Hinge

Study on the optimization of high-speed turnout crossing structures based on actual elastic deformation of point and splice rails

Study of Problems Related to Laying Ballastless Track in the Turnout of Ballasted Track at High-Speed Railway Stations

Study on the Stiffness and Dynamic Characteristics of a Bridge Approach Zone: Tests and Numerical Analyses

Finite Element Analysis of Dynamic Characteristic on Continuous Welded Rail Track under Longitudinal Temperature Force

Research on the longitudinal mechanical behaviours of subway turnouts of large slope under train braking force

Effect of dynamic stiffness of fasteners on vibration and acoustic radiation of a ballastless track

The Effect of Unsupported Sleepers/Bearers on Dynamic Phenomena of a Railway Turnout System under Impact Loads

Dynamic wheel-rail interaction of a train crossing a turnout under traction/braking behaviour and research on rail wear of the turnout

Analytical representations of inherent structural irregularities in turnout crossing with moveable point

Influence of Heterogeneous Mechanical Properties on the Performance of Forward Static Bending Test of Rail Welded Joint

Fatigue Characteristics of Long-Span Bridge-Double Block Ballastless Track System