Abstract:The key issues in designing ballastless track for high-speed railway bridges are to reduce maintenance and improve track smoothness by understanding fatigue damage characteristics. This paper is based on the principle of bridge-rail interaction and train-track-bridge coupling dynamics, the refined simulation model of bridge-CRTS I Bi-block ballastless track system is established by using the finite element method. The longitudinal force distribution law of CWR (Continuously Welded Rail) and the dynamic response characteristics of coupling systems are studied, based on the Miner rule and S-N curve. The fatigue characteristics of ballastless track system laying on long-span bridge under the dynamic train load and the effect of ballastless track system design parameters changes on fatigue characteristics are discussed. The results show that the extreme values of longitudinal force of CWR all appear in the middle of the bridge span or near the bridge bearing, and attention should be paid to the strength checking of CRW laying on long-span bridge. Under the dynamic train load, the fatigue life curve of rail on the bridge is relatively smooth and the minimum life of rail which is laying on continuous bridge decreases from 27.1 years to 17 years that which is laying on cable-stayed bridge. The life curve of track plate laying on continuous bridge is relatively smooth, and the life curve of track plate laying on cable-stayed bridge is related to the stiffness of elastic cushion, which decreases in a stepped manner, and there will be no fatigue failure on the track plate during service. The life curve of the baseplate is related to the type of bridge, the minimum life value of the baseplate appears near the bridge bearing, and there will be no fatigue failure on the baseplate during service. Increasing the stiffness of elastic cushion can effectively improve the fatigue life of track plate, and increasing the vertical stiffness of fasteners can enhance the connection between rail and track plate and improve the fatigue life of rail. The increase in train speed will increase the dynamic stress amplitude of track structure and reduce the fatigue life of the rail.

Fatigue damage analysis of the straight switch rail considering complex random loads

Multi-feature Integration and Machine Learning for Guided Wave Structural Health Monitoring: Application to Switch Rail Foot

Three-dimensional Finite Element Simulation on Moving Load Induced Track Response over Stiffness-varied Base

Numerical simulation of rail surface-initiated rolling contact fatigue in the switch panel of railway turnouts

Load spectrum extrapolation method for fatigue damage of the turnout based on kernel density estimation

Numerical investigation of wheel-rail rolling contact characteristics and damage in a high-speed turnout switch panel under a large ramp

Investigation of the Fatigue Behaviour of a Ballastless Slab Track–Bridge Structural System under Train Load

Numerical and Experimental Investigation of Longitudinal Rail Creep at Turnouts on Steep Ramps Under Repeated Loads Considering Realistic Braking Loads of Vehicles

An investigation into transient frictional rolling contact behaviour in a switch panel: validation and numerical simulation

Dynamic wheel-rail interaction of a train crossing a turnout under traction/braking behaviour and research on rail wear of the turnout

Investigation of frictional rolling contact behavior in a switch panel considering traction load

Fatigue Characteristics of Long-Span Bridge-Double Block Ballastless Track System

Investigating the fatigue performance of conventional reinforced concrete CRTS III ballastless track structures using a fatigue damage constitutive model

Study on fatigue damage tolerance of rail steel materials using peridynamics

Research on guided wave propagation characteristics in turnout rails with variable cross-section

Analysis of fatigue crack propagation in rails under combined action of wheel load and residual stress

Evaluating the Effect of Rail Fastener Failure on Dynamic Responses of Train-Ballasted Track-Subgrade Coupling System for Smart Track Condition Assessment

Analysis of load characteristics and fatigue life prediction of fixed frog nose rail under complex conditions based on load spectrum compilation

Analysis of the wheel-rail dynamic response characteristics and damage to the fixed frog of the No. 3 tram turnout

Dynamic fatigue damage calculation for a high-speed train bogie frame considering the three-dimensional gear meshing

Study on train running safety in railway switches and sharp curves considering wheel wear evolution