Abstract:An oblique detonation wave in two-phase kerosene–air mixtures over a wedge is numerically studied for the first time. The features of initiation and stabilisation of the two-phase oblique detonation are emphasised, and they are different from those in previous studies on single-phase gaseous detonation. The gas–droplet reacting flow system is solved by means of a hybrid Eulerian–Lagrangian method. The two-way coupling for the interphase interactions is carefully considered using a particle-in-cell model. For discretisation of the governing equations of the gas phase, a WENO-CU6 scheme (Hu et al., J. Comput. Phys., vol. 229 (23), 2010, pp. 8952–8965) and a sixth-order compact scheme are employed for the convective terms and the diffusive terms, respectively. The inflow parameters are chosen properly from real flight conditions. The fuel vapour, droplets and their mixture are taken as the fuel in homogeneous streams with a stoichiometric ratio, respectively. The effects of evaporating droplets and initial droplet size on the initiation, transition from oblique shock to detonation and stabilisation are elucidated. The two-phase oblique detonation wave is stabilised from the oblique shock wave induced by the wedge. As the mass flow rate of droplets increases, a shift from a smooth transition with a curved shock to an abrupt one with a multi-wave point is found, and the initiation length of the oblique detonation increases, which is associated with the increase of the transition pressure. By increasing the initial droplet size, a smooth transition pattern is observed, even if the equivalence ratio remains constant, and the transition pressure decreases. The factor responsible is incomplete evaporation before the detonation fronts, which results in a complicated flame structure, including regimes of formation of oblique detonation, evaporative cooling of droplets and post-detonation reaction.

Unsteady propagation of detonation with multi-stage heat release

On the role of transverse detonation waves in the re-establishment of attenuated detonations in methane-oxygen

Stability investigation of two-phase n-decane rotating detonation waves

Numerical Investigation on Effects of Ignition Energy on Two-phase Detonation Wave Formation

The Effect of Instability of Detonation on the Propagation Modes Near the Limits in Typical Combustible Mixtures

Effect of the Multiphase Composition in a Premixed Fuel–air Stream on Wedge-Induced Oblique Detonation Stabilisation

Visual experimental research on the propagation instabilities in a plane-radial rotating detonation engine

Origin and chaotic propagation of multiple rotating detonation waves in hydrogen/air mixtures

Structure of Detonation Propagating in Lean and Rich Dimethyl Ether–oxygen Mixtures

Numerical investigation of detonation initiation in a modeled rotating detonation engine

The Hydrodynamic Structure of Unstable Cellular Detonations

Numerical study on stabilization of wedge-induced oblique detonation waves in premixing kerosene-air mixtures

Multiple Ignitions and the Stability of Rotating Detonation Waves

Experimental study on the propagation characteristics of detonation wave in annular channels with convergent cross-sections

Investigation of Counter-Rotating Shock Wave Phenomenon and Instability Mechanisms of Rotating Detonation Engine with Hollow Combustor and Laval Nozzle

Multi-wave effects on stability and performance in rotating detonation combustors

Computational Investigation on the formation of liquid-fueled oblique detonation waves

Influence of Turbulent Fluctuations on Detonation Propagation

Effects of Fuel Concentration Gradient on Stabilization of Oblique Detonation Waves in Kerosene–Air Mixtures

Research on the initiation and wavefront evolution of diverging cylindrical detonations of acetylene and oxygen mixtures

Operational Mode Transition in a Rotating Detonation Engine