Abstract:Incorporation of novel 2D materials with conducting polymers have attracted increasing attention in the supercapacitor applications owing to their unique properties. In the present work, novel polycarbazole (PCz)/porous boron carbon nitride (BCN) nanocomposites were prepared in different ratio (30, 50, and 70 wt%) via facile in situ chemical oxidative polymerization method. The PCz-BCN nanocomposites was synthesized at room temperature using an easy and inexpensive chemical oxidative method. The structure and formation of nanocomposites were analysed by X-ray diffraction (XRD), Fourier Transform Infra-Red (FT-IR), Raman Spectroscopy, and X-ray Photoelectron Spectroscopy (XPS) characterization techniques. Furthermore, the structural morphology of the PCz-BCN nanocomposite-50 wt% was analysed by Field Emission-Scanning Electron Microscopy (FE-SEM) and High-Resolution Transmission Electron Microscopy (HR-TEM). The thermal behaviour of the as-prepared sample was analysed using Thermo Gravimetric Analysis (TGA) technique. Cyclic Voltammetry (CV), Galvanostatic Charge–Discharge (GCD), and Electrochemical Impedance Spectroscopy (EIS) studies were used to evaluate the electrochemical specific capacitive performance of the prepared electrode material at different scan rates and current density in the various potential windows. It was found that the orthorhombic crystalline nature of the polycarbazole incorporated well with the stacking layer of the sp 2 -hybridized graphitic BCN aromatic ring structure via the Van der Waals interaction. The PCz/BCN-50 wt% nanocomposite electrode material exhibits specific capacitance 134 F g −1 at current density of 3 mA g −1 in aqueous electrolyte 3 M KOH compared to the pure PCz and BCN. Furthermore, even after 800 cycles, the PCz-BCN nanocomposite electrode demonstrated excellent cyclic stability, because the improved enhancement of the specific capacitance of the conductive network of the PCz-BCN composite, as well as the synergistic effect of pure PCz and BCN, makes it a promising material for supercapacitor application. Hence, the facile in situ oxidative polymerization method of the synthesis of the porous PCZ-BCN nanocomposite is a promising route for producing electrode materials so as to fabricate high-performance supercapacitors in a cost-effective way.

Investigations on Electrochemical Activity of Polycarbazole/Cadmium Sulfide/Hematite Iron (III) Oxide (PCz/CdS/α‐Fe2O3) Nanocomposite Electrode for Supercapacitors

Iron (II and III) Oxides/Reduced Graphene Oxide/Polypyrrole Ternary Nanocomposite As Electrochemical Supercapacitor Electrode

Investigations on Polypyrrole/Prussian Blue/Ruthenium Dioxide Based Ternary Nanocomposite as an Electrode Material for Supercapacitors

Novel Hybrid Electrode Coatings Based on Conjugated Polyacid Ternary Nanocomposites for Supercapacitor Applications

Facile in situ synthesis of flexible porous polycarbazole/BCN nanocomposite as a novel electrode material for high-performance supercapacitor

Graphene-cerium Oxide/porous Polyaniline Composite As a Novel Electrode Material for Supercapacitor

Design and synthesis of ternary composite of polyaniline-sulfonated graphene oxide-TiO2 nanorods: a highly stable electrode material for supercapacitor

Electrochemical performance of Co3O4/Ag/CuO electrodes for supercapacitor applications

ZIF-67 and titania derived quaternary composites as electrode materials for high-performance supercapacitor

One‐step electrochemical preparation of ternary phthalocyanine/acid‐activated multiwalled carbon nanotube/polypyrrole‐based electrodes and their supercapacitor applications

Optimisation of a ternary composite of CuFe2O4/CuO@rGO and its electrochemical evaluation as an electrode material for supercapacitor applications

Design and preparation of ternary α-Fe2O3/SnO2/rGO nanocomposite as an electrode material for supercapacitor

FeCo2O4@PC as the electrode material for enhanced electrochemical performance of supercapacitors

Fabrication and characterization of Sb2O3-MoS2nanocomposites for high performance supercapacitor applications

Combining in-situ sedimentation and carbon-assisted synthesis of Co3O4/g-C3N4 nanocomposites for improved supercapacitor performance

Synthesis, Characterization and Electrochemical Study of Carbon Nanotube/Chitosan-Ferrocene Nanocomposite Electrode as Supercapacitor Material

Facile Synthesis of Co3O4@N-pc/PEDOT Composites for Supercapacitor Electrode

Electro-sprayed Quaternary Composite of Poly(aniline-co-pyrrole), Graphene Oxide, and Iron Oxide as an Efficient Electrode for Hybrid Supercapacitor Application

Co3o4@Cos Core-Shell Nanosheets On Carbon Cloth For High Performance Supercapacitor Electrodes

Preparation of Sandwich-Structured Ternary Nanocomposites Porous Carbon-Derived from Waste Tires/manganese Dioxide/polyaniline As Electrode for Supercapacitor

Facile synthesis of hybrid nanocomposite based on chitosan binary metal oxides for high‐performance supercapacitor