Abstract:Solar photovoltaic panels are designed to generate electrical voltage when exposed to sunlight. The temperature of the photovoltaic cell surface rises as a result of sunlight striking the active portion of the panel. The output voltage of the PV cell decreases as the surface temperature of the PV cell rises, resulting in a drop in the PV module's output power. To reduce the operating temperature of the PV module different types of a heat sink having PCM are used in already published studies. This research work aims to enhance the performance of the heat sink by attaching an alternative and novel kind of heat sink to the rear side of the PV module. The proposed heat sink is composed of an array of drilled cylindrical rods with extended geometry like pin fins filled with phase change material. The proposed thermal management model is investigated both experimentally and by numerical simulations. Using experimental data, the thermal and electrical performances of the modified PV module are compared to the original PV module. Fins absorb heat from the rear surface of the PV panel through conduction heat transfer and increase the heat transfer area. The PCM absorbs the heat from the PV module in the form of latent heat transfer by shifting its phase. In the trials, the temperature of the PV module decreased by 5.18 °C. The output voltage is raised by 0.53 V, and the PV-PCM efficiency is increased by 2.9% to the efficiency of the PV module without a heat sink. Moreover, a comprehensive parametric sensitivity analysis is conducted using the validated numerical model to investigate the impact of wind speed and incidence angle on the PCM-integrated modified PV module. The numerical results show an increase of 0.4 m/s in wind speed decreases the temperature of the Tedlar wall to 0.4196 °C and the temperature of the solar module decreases by increasing the Iincidence angle of wind from 30°–90°. The results indicate that the PCM-integrated modified solar module is successful in optimizing the PV module's output power.

Performance analysis of photovoltaic module using eutectic phase change material

Performance enhancement of photovoltaic module by integrating eutectic inorganic phase change material

Efficiency enhancement of photovoltaic module using bio-based eutectic phase change material: An experimental study

Influence of Different Melting Points of Phase Change Material on Photovoltaic Phase Change Materials System Performance: An Energy, Exergy, and Environmental Point of View

Experimental, numerical, and 4E assessment of photovoltaic module using macro-encapsulation of pure and nano phase change material: A comparative analysis

Annual Thermal Management of the Photovoltaic Module to Enhance Electrical Power and Efficiency Using Heat Batteries

Performance evaluation and thermal stabilization of photovoltaic panels using phase-change materials

Influence on solar PV performance integrated with heat sinks and nano-enhanced phase change material

Thermal analysis of solar panel with phase change material: experimental and numerical study

Performance improvement of solar PV module through hybrid cooling system with thermoelectric coolers and phase change material

Efficiency improvement of PV module using a binary-organic eutectic phase change material in a finned container

Photovoltaic Performance Improvement with Phase Change Material Cooling Treatment

Thermal evaluation of photovoltaic panels combined pulsating heat pipe with phase change materials: numerical study and experimental validation

Electrical and thermal performance assessment of photovoltaic thermal system integrated with organic phase change material

Numerical investigation of the effect of operating conditions on performance of PV-PCM system

Investigation of Inorganic Phase Change Material for a Semi-Transparent Photovoltaic (STPV) Module

Thermal management of photovoltaic module with metal matrix embedded PCM

Research and numerical analysis on performance optimization of photovoltaic-thermoelectric system incorporated with phase change materials

Hexadecanol-palmitic acid/expanded graphite eutectic composite phase change material and its application in photovoltaic panel

Effect of varying the thermophysical properties of phase change material on the performance of photovoltaic/thermal-PCM hybrid module numerically

Thermal management of solar photovoltaic module by using drilled cylindrical rods integrated with phase change materials