Tailoring LLDPE properties with modified palygorskite fillers: A comprehensive study
Thais Ferreira da Silva,Eduardo Quinteiro,Guilherme Henrique França Melo,Guilherme Ferreira de Melo Morgado,Uttandaraman Sundararaj,Ana Paula Fonseca Albers,Fabio Roberto Passador
DOI: https://doi.org/10.1002/pen.26864
2024-07-20
Polymer Engineering & Science
Abstract:Surface modification by organophilization and silanization of polygorskite. Linear low‐density polyethylene (LLDPE) is a polyolefin known for its superior low‐temperature heat seal ability, low‐temperature tolerance, and bag‐tear resistance which are important features for the polymeric packaging sector. In this work, to improve the mechanical properties and expand the range of applications of LLDPE, the microfibrillar clay mineral palygorskite (PAL) was added. However, the use of PAL as a reinforcing agent for polymers depends on its purification process to extract accessory minerals such as calcite, dolomite, and quartz. In addition to this purification process, two surface modifications were used on the purified PAL (PALp) to improve interactions with LLDPE: silanization with aminosilane (PALs) and organophilization by incorporating an organic compound (PALo). The PAL were characterized according to their morphological properties using transmission electron microscopy (TEM), X‐ray diffraction (XRD), and Fourier transform infrared spectroscopy (FT‐IR). The films of LLDPE/PAL, with varying levels (1, 3, and 5 wt%) and types of PAL (raw PAL, PALp, PALs, and PALo), were prepared by an extrusion process, and films were prepared by compression molding, without preferred orientation. The films were characterized by rheological analyses, tensile tests, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and water vapor permeability. Incorporating modified PAL was significant in enhancing the mechanical properties of the nanocomposites. LLDPE/PALs with the addition of 3 wt% PALs showed a 14% increase in elastic modulus (281.08 ± 8.25 MPa) compared to the nanocomposite with 3 wt% of raw PAL (243.43 ± 15.01 MPa). Highlights The PAL is a clay mineral with a fibrous morphology and has a low cost. The technique to purify PAL is a quick, simple, and inexpensive technique. Comparison between of two technique surface modification of PAL. The effectiveness of modifications of PAL was confirmed in LLDPE films. The surface modification with silanization was more effective.
engineering, chemical,polymer science