Abstract:The optimal framework of Bi/Bi2O3 nanodots enriched in suitable outer amorphous carbon sheets (Bi/Bi2O3 NDs@CSs) is elaborately prepared. Such a special structural design is favorable for superior potassium storage, delivering high rate capacity of 149.4 mAh g−1 at 60 A g−1, and robust cycling performance of 201.8 mAh g−1 is maintained over 1000 cycles at 10 A g−1. Bismuth (Bi)‐based materials merit high theoretical volumetric specific capacity (3800 mAh mL−1) but suffer from huge volume variations and sluggish reaction kinetics during cycling. Herein, the optimal framework of Bi/Bi2O3 nanodots enriched in suitable outer amorphous carbon sheets (Bi/Bi2O3 NDs@CSs) is first proposed to alleviate volume variations and accelerate stable charge transport to boost K+ storage performance. The introduction of proper Bi2O3 not only provides an efficient K+ adsorption path, but also effectively buffers volume changes via conversion reaction. Accordingly, the as‐prepared anode exhibits a remarkable rate capability (149.3 mAh g−1 at 60 A g−1, 42% capacity retention with a 120‐fold current‐density increase) and extraordinary durability (1800 cycles at 5.0 A g−1, 95% capacity retention), among the best rate and cycling performance to date in potassium ion batteries (PIBs) anodes. Theoretical calculations reveal the feasible structures of Bi/Bi2O3 NDs@CSs with double protection of carbon sheets and Bi2O3 are conducive to enhance charge transfer and efficiency of electrochemical reaction. Substantial in situ/ex situ characterizations and finite element simulation further unveil high reversibility and robust mechanical behavior of Bi/Bi2O3 NDs@CSs, favorable for the reinforcement of structural stability. This study provides new insights into developing high‐performance and durable Bi‐based anodes for PIBs.

Encapsulating Bi Nanoparticles in Reduced Graphene Oxide with Strong Interfacial Bonding toward Advanced Potassium Storage

Bismuth Telluride Nanoplates Hierarchically Confined by Graphene and N‐Doped C as Conversion‐Alloying Anode Materials for Potassium‐Ion Batteries

A High-Volumetric-capacity Bismuth Nanosheet/graphene Electrode for Potassium Ion Batteries

Bi/Bi3Se4 Nanoparticles Embedded in Hollow Porous Carbon Nanorod:High Rate Capability Material for Potassium-Ion Batteries

Bismuth Nano-Rods Wrapped with Graphene and N-Doped C as Anode Materials for Potassium- and Sodium-Ion Batteries

Promoting superior K-ion storage of Bi<sub>2</sub>S<sub>3</sub> nanorod anode via graphene physicochemical protection and electrolyte stabilization effect

Electrochemical behavior and reaction mechanism of nano-BiOBr/rGO composite micro flower with strong interface coupling as potassium-ion battery anodes

Enhanced Electrochemical Performances of Bi2O3/rGO Nanocomposite via Chemical Bonding as Anode Materials for Lithium Ion Batteries

Boosting Potassium-Storage Performance Via the Functional Design of a Heterostructured Bi2S3@RGO Composite.

Conversion-alloying Dual Mechanism Anode: Nitrogen-doped Carbon-Coated Bi2Se3 Wrapped with Graphene for Superior Potassium-Ion Storage

Bi@Bi 2 O 3 anchored on porous graphene prepared by solvothermal method as a high-performance anode material for potassium-ion batteries

Bi 2 S 3 Nanorods Encapsulated in Iodine-Doped Graphene Frameworks with Enhanced Potassium Storage Properties

Graphene Architecture Interpenetrated with Mesoporous Carbon Nanosheets Promotes Fast and Stable Potassium Storage

Fast and Long‐Lasting Potassium‐Ion Storage Enabled by Rationally Engineering Strain‐Relaxation Bi/Bi2O3 Nanodots Embedded in Carbon Sheets

Vapor-phase derived ultra-fine Bismuth nanoparticles embedded in carbon nanotube networks as anodes for sodium and potassium ion batteries

Bi 2 S 3 Nanorods Hosted on rGO Sheets from Pyrolysis of Molecular Precursors for Efficient Li‐Ion Storage

Few-Layered Tin Sulfide Nanosheets Supported on Reduced Graphene Oxide As a High-Performance Anode for Potassium-Ion Batteries

Design of a 1D/2D C3N4/rGO Composite As an Anode Material for Stable and Effective Potassium Storage

A Metal-Organic Framework Derived Approach to Fabricate In-Situ Carbon Encapsulated Bi/Bi2O3 Heterostructures As High-Performance Anodes for Potassium Ion Batteries.

Self-Propagating Fabrication of a 3D Graphite@rGO Film Anode for High-performance Potassium-Ion Batteries

Polyvinylpyrrolidone-Bridged Prussian Blue/rGO Composite as a High-Performance Cathode for K-Ion Batteries