Abstract:Electrocardiography (ECG) is a primary tool for diagnosis of various types of disease and disorders such as arrhythmias, coronary heart disease, heart attack, mental disorders, etc. Reliable wearable ECG devices can be a valuable tool in early diagnosis and effective treatment of such disease and disorders. Convention wearable ECG sensor-systems are rigid, bulky, expensive, and the recorded ECG signals using these wearable devices lack required accuracy for medical diagnosis mainly due to motion artifacts that is originated from slippage of sensors on skin and/or instable interface between the soft sensor and the rigid electronic circuits. Here, we report a low-modulus, soft and stretchable wearable electrocardiography (ECG) sensor-system patch which enables continuous and long-term recording of ECG signals with minimal motion artifacts. This system consists of two reusable, detachable-attachable patches: sensor patch and circuit patch, as shown in Figure 1a. The reusable multi-wall carbon nanotube (MWCNT) based sensor patch is fabricated on stretchable elastomer substrate by our developed cost and time-effective method. Reusable, front-end and wireless circuit patch is made by integration of the off-the-shelf integrated circuit components with three-dimensional (3D) stretchable-deformable interconnects (SDI). SDIs are 3D springs of liquid metal (EGaIn). Unlike other reported liquid metal based interconnects, SDI has been designed in 3D form to increase the stretchability and make it low-modulus and robust to deformations in all directions. The stretchability of SDI structure is beyond 500% (the limit of our measurement system) without any negligible change in electrical resistivity of the interconnects. With less than 1% change in the resistance of SDIs after 50,000 cycles of applied tensile strain of 200%, the SDI structure ensures reliable stretchability and durability of the circuit patch for long-term electrocardiography. The sensor patch is soft, stretchable and it is fabricated using a low-cost scalable method. This soft and stretchable ECG sensor-system shows comparable performance with respect to medical grade Ag/AgCl wet gel electrodes. Our CNT-PDMS sensors shows low electrode-skin interface impedance and low susceptibility to motion artifact which similar of it in medical grade Ag/AgCl wet gel sensors (Fig. 1b). Further, it is waterproof, reusable and comfortable to wear. The circuit patch includes a rechargeable battery and ECG signals is wirelessly sent to a personal device such as cellphone, tablet and laptop through Bluetooth low energy (BLE) and it is displayed in real-time (Fig. 1c) Our developed sensor-system is a multi-use platform which can be applied for the detection of EMG, EEG or EOG signals. Figure 1

Fully Screen-Printed and Gentle-to-Skin Wet ECG Electrodes with Compact Wireless Readout for Cardiac Diagnosis and Remote Monitoring

Battery‐Free and Wireless Epidermal Electrochemical System with All‐Printed Stretchable Electrode Array for Multiplexed in Situ Sweat Analysis

PEDOT:PSS Hydrogel based Flexible Electrodes for Wearable ECG Monitoring

A System-on-chip and Paper-Based Inkjet Printed Electrodes for a Hybrid Wearable Bio-Sensing System

Electrical Performance Of Inkjet Printed Flexible Cable For Ecg Monitoring

A Smart Electrolyte-Replenishing Semi-Dry Electrode Based on a Temperature-Responsive Hydrogel for Sustainable Electrophysiological Signal Acquisition

An Active-Cable Connected ECG Monitoring System for Ubiquitous Healthcare

Multi‐material direct‐ink‐writing of silver‐based flexible and highly deformable dry electrocardiogram biopatches

(Digital Presentation) A Low-Modulus, Soft and Stretchable Wearable Electrocardiography Sensor-System Patch

Robust Tattoo Electrode Prepared by Paper-Assisted Water Transfer Printing for Wearable Health Monitoring

Multi‐Electrode Printed Bioelectronic Patches for Long‐Term Electrophysiological Monitoring

Washable and Flexible Screen-Printed Ag/AgCl Electrode on Textiles for ECG Monitoring

A Wearable Flexible Hybrid Electronics ECG Monitor

Design of a smart ECG garment based on conductive textile electrode and flexible printed circuit board.

Rapid Fabrication of Low Impedance, 3D Dry Electrodes for Physiological Sensing

Solution-Processed Submicron Free-Standing, Conformal, Transparent, Breathable Epidermal Electrodes.

Flexible Electrode By Hydrographic Printing For Surface Electromyography Monitoring

Integrated dry poly(3,4-ethylenedioxythiophene):polystyrene sulfonate electrodes on finished textiles for continuous and simultaneous monitoring of electrocardiogram, electromyogram and electrodermal activity

Embroidered electrode with silver/titanium coating for long-term ECG monitoring

Flexible and robust dry electrodes based on electroconductive polymer spray-coated 3D porous graphene for long-term electrocardiogram signal monitoring system

3D Printing of Robust High‐Performance Conducting Polymer Hydrogel‐Based Electrical Bioadhesive Interface for Soft Bioelectronics