Abstract:This study investigates a carbon-based all-perovskite tandem solar cell (AP-TSC) with the structure ITO, SnO2, Cs0.2FA0.8Pb(I0.7Br0.3)3, WS2, MoO3, ITO, C60, MAPb0.5Sn0.5I3, PEDOT: PSS, Carbon. The bandgap configuration of the cell is 1.75 eV/1.17 eV, which is theoretically limited to 36% efficiency. The effectiveness of embedding cubic plasmonic metallic nanoparticles (NPs) made of Gold (Au) and Silver (Ag) within the absorber layers to eliminate the requirement for thicker absorber layers, decrease manufacturing costs and Pb toxicity is demonstrated in our analysis. This analysis was conducted using 3D Finite Element Method (FEM) simulations for both optical and electrical calculations. Prior to delving into the primary investigation of the tandem structure, a validation simulation was conducted to demonstrate the accuracy and reliability of the simulations. Notably, the efficiency mismatch observed during the validation simulation, specifically in relation to the incorporation of metallic nanoparticles (NPs), amounted to a mere 0.01%. To mitigate the potential issues of direct contact between metallic NPs and perovskite materials, such as increased thermal and chemical instability and recombination at the NP surface, a 5 nm dielectric shell was applied to the NPs. The incorporation of cubic core-shell Ag NPs resulted in a 15.32% enhancement in short-circuit current density, from 16.39 mA/cm2 to 18.90 mA/cm2, and a 15.68% increase in overall efficiency, from 26.9 to 31.12%. This research paves the way for the integration of core-shell metallic NPs in AP-TSCs, highlighting a significant potential for efficiency and stability improvements. In a dedicated section the band alignment of the sub-cell was addressed. Additionally, a thermal investigation of the proposed tandem structure was conducted, demonstrating the robustness of the proposed AP-TSC. Finally, the sensitivity analyses related to input parameters and the challenges associated with large-scale fabrication of the proposed AP-TSC were extensively discussed.

Impacts of plasmonic nanoparticles incorporation and interface energy alignment for highly efficient carbon-based perovskite solar cells

Plasmonic Electrically Functionalized TiO2 for High‐Performance Organic Solar Cells

Plasmon-Enhanced Perovskite Solar Cells Based on Inkjet-Printed Au Nanoparticles Embedded into TiO2 Microdot Arrays

Plasmonic Ag@Oxide Nanoprisms for Enhanced Performance of Organic Solar Cells

The role of plasmonic metal-oxides core-shell nanoparticles on the optical absorption of Perovskite solar cells

Optimization of Hollow Materials-Based Electron Transport Layer for Enhanced Performance of Perovskite Solar Cell

Plasmonic Metal Nanoparticles with Core-Bishell Structure for High-Performance Organic and Perovskite Solar Cells.

Design and analysis of high-efficiency perovskite solar cell using the controllable photonic structure and plasmonic nanoparticles

Synergistic Effect of Plasmonic Gold Nanoparticles Decorated Carbon Nanotubes in Quantum Dots/TiO2 for Optoelectronic Devices

Enhancing photovoltaic performance of carbon-based perovskite solar cells by introducing plasmonic Au NPs

Efficient and environmental-friendly perovskite solar cells via embedding plasmonic nanoparticles: an optical simulation study on realistic device architecture

Optical, Thermal, and Electrical Analysis of Perovskite Solar Cell with Grated CdS and Embedded Plasmonic Au Nanoparticles

Optimizing Carbon-Based Perovskite Solar Cells with Pyramidal Core–Shell Nanoparticles for High Efficiency

Enhanced efficiency of carbon based all perovskite tandem solar cells via cubic plasmonic metallic nanoparticles with dielectric nano shells

Plasmonics Meets Perovskite Photovoltaics: Innovations and Challenges in Boosting Efficiency

Ultrasound-spray Deposition of Multi-Walled Carbon Nanotubes on NiO Nanoparticles-Embedded Perovskite Layers for High-Performance Carbon-Based Perovskite Solar Cells

Efficient application of carbon-based nanomaterials for high-performance perovskite solar cells

Tailored Au@TiO2 Nanostructures for the Plasmonic Effect in Planar Perovskite Solar Cells

Morphological investigation and 3D simulation of plasmonic nanostructures to improve the efficiency of perovskite solar cells

Interface studies of the planar heterojunction perovskite solar cells