Abstract:High-quality and uniform perovskite films are the first step toward high-performance perovskite solar cells (PSCs). Adding additives to regulating the film formation process is proved to be an efficient way to acquire high-quality perovskite films. In this study, we use functionalized carbon nanotubes (CNTs) as effective additives to improve the power conversion efficiency (PCE) of PSCs. Three kinds of CNTs, namely, pristine CNTs, amino-group-functionalized CNTs (NH2-CNTs), and carboxyl-group-functionalized CNTs (COOH-CNTs) are selected. The PCE of PSCs doped with pristine CNTs (13.91%) drops compared with that of a control device (16.56%), while the PCE increases to 17.47% for NH2-CNT-doped PSCs and 17.75% for COOH-CNT-doped PSCs. A detailed study shows that both NH2-CNTs and COOH-CNTs can facilitate the crystallization of the perovskite films. Compared with a control film, the hole mobility of the perovskite films can be increased by 1 order of magnitude in a COOH-CNT-doped perovskite film. This contributes to better carrier transportation in PSCs. After optimizing the length and doping concentration of the COOH-CNTs, the PCE for PSCs doped with COOH-CNTs steadily improves to 18.68%. Furthermore, the stability of PSCs has also been improved with COOH-CNT-doped perovskite films. Our study provides insightful hints for using functionalized carbon-based materials to develop high-performance perovskite-based optoelectronic devices.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.0c01675?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.0c01675</a>.Experimental section that contains material preparation and device fabrication; SEM images of the pristine CNT-doped perovskite films (Figure S1); normalized peak intensity of the perovskite (110) peak on the XRD patterns of the control, pristine CNT-, NH2-CNT-, and COOH-CNT-doped perovskite films (Figure S2); absorption spectrum of the control, pristine CNT-, and COOH-CNT-doped perovskite films (Figure S3); histograms of PCEs for the devices using different fabrication methods (Figure S4); FTIR spectrum of the perovskite films, COOH-CNT-, and COOH-CNT-doped perovskite films (Figure S5); images of the dispersion of CNTs in DMF (Figure S6); J–V curves of the champion large-scale device (Figure S7); J–V hysteresis curves of the device (Figure S8); J–V curves of the pristine CNT-doped PSCs with different CNT lengths and concentrations (Figure S9); and hysteresis feature of the prepared devices (Table S1) (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.0c01675/suppl_file/ae0c01675_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Ultrasound-spray Deposition of Multi-Walled Carbon Nanotubes on NiO Nanoparticles-Embedded Perovskite Layers for High-Performance Carbon-Based Perovskite Solar Cells

Carbon Quantum Dot-Passivated Perovskite/Carbon Electrodes for Stable Solar Cells

Carbon Quantum Dot Additive Engineering for Efficient and Stable Carbon-Based Perovskite Solar Cells

Enhanced power conversion efficiency of perovskite solar cells using dopant-free carbon nanotubes-Spiro-OMeTAD

Superwetting Nanofluids of NiOx-Nanocrystals/CsBr Solution for Fabricating Quality NiOx-CsPbBr3 Gradient Hybrid Film in Carbon-Based Perovskite Solar Cells

Efficient application of carbon-based nanomaterials for high-performance perovskite solar cells

Boosting fill factor and open-circuit voltage of carbon-based perovskite solar cells with graphene co-doped P3HT/NiOx hole-transporting bilayer

High-performance, Stable and Low-Cost Mesoscopic Perovskite (ch3nh3pbi3) Solar Cells Based on Poly(3-Hexylthiophene)-modified Carbon Nanotube Cathodes

High-Performance Electron Transport Layer via Ultrasonic Spray Deposition for Commercialized Perovskite Solar Cells

Syntheses of efficient nickel oxide film by low-temperature fabrication technique for high-performance perovskite solar cells

Stable and highly efficient all-inorganic CsPbBr3 perovskite solar cells by interface engineering with NiO NCs modification

Applying Neoteric MgTiO3-coated TiO2 Nanoparticulate Films As Scaffold Layers in Perovskite Solar Cells Based on Carbon Counter Electrode for Retarding Charge Recombination

Recent Advances in Carbon Nanotube Utilizations in Perovskite Solar Cells

Accelerating Thermal Transfer in Perovskite Films for High‐Efficiency and Stable Photovoltaics

Back interface management by multifunctional composite carbon nanospheres electrode for efficient and stable HTL-free carbon-based perovskite solar cells

Functionalized CNTs as Effective Additives to Improve the Efficiency of Perovskite Solar Cells

Harnessing SWCNT absorber based efficient CH3NH3PbI3 perovskite solar cells

High Efficiency over 20% of Perovskite Solar Cells by Spray Coating via a Simple Process

Cross-stacked superaligned carbon nanotube electrodes for efficient hole conductor-free perovskite solar cells

Hierarchical Nanostructures CuBi2O4 Integrated with Polyaniline Nanofibrous for Boosting Hole Extraction in Carbon-Based Perovskite Solar Cells

Colloidal Precursor-Induced Growth of Ultra-Even CH 3 NH 3 PbI 3 for High-Performance Paintable Carbon-Based Perovskite Solar Cells.