Abstract:For more than a century, rail corrugation has been exposed as one of the most serious problems experienced in railway networks. It also comes with a series of problems for maintenance, such as rolling noises and structural vibrations that can reduce lifetime of both train and track. This periodical phenomenon on rail surface is closely linked to wheel-rail contact dynamic, which depends on friction, train dynamics… To better understand corrugation birth conditions, a numerical model is suggested to complement the experimental limitations and to instrument a wheel-rail contact both locally and dynamically. At first, an appropriate tool was chosen to create the dynamic wheel-rail contact model to reproduce straight-track corrugation, also called “short-pitch” corrugation. The implicit dynamic finite element code Abaqus was chosen to investigate the dynamic local contact conditions. Both the origin and the evolution of straight-track corrugation under transient conditions (acceleration / deceleration) are studied. The parametrical sensibility of corrugation is thus investigated both with single/multiple wheel passing(s) and with geometric defect. A stick-slip phenomenon, linked to both wheel and rail dynamics coupled through the contact, is identified as the root of straight-track corrugation under transient conditions. Secondly, results obtained with the previous model have highlighted a quick decrease of corrugation amplitude with the increase of wheel passings over the rail. This last result seems to be in contradiction with reality. This problem comes from the difficulty to reliably manage contact dynamics, and particularly with local impacts, with the use of classical finite element models such as the one implemented in Abaqus. To compensate for this lack, a mass redistribution method is implemented in Abaqus and used with the previous case. The results show a more realistic corrugation growth according to the number of wheel passings.

Numerical investigation of crack initiation on rail surfaces considering laminar plasma quenching technology

Effect of material non-uniformity and residual stress on wear and transient rolling contact behaviour in laminar plasma quenched (LPQ) rails

Numerical investigation on the rolling contact wear and fatigue of laser dispersed quenched U71Mn rail

Theoretical study of laminar plasma quenching of rail steel using the fluid-solid-thermal coupling method

Study on Fatigue Crack Growth in Rail Steel at Numerical and Experimental Approaches

Study on rolling contact fatigue crack initiation and propagation in U75V rail treated by laminar plasma

Study on the mechanism of plasma jet surface hardening of rail steels by using numerical method

Fatigue crack growth in wheel-rail rolling-sliding contact: A perspective of elastic-plastic fracture mechanics criterion

Crack initiation study in railway curves under coupled thermomechanical loading using finite element simulation

Numerical Simulation and Mechanism Analysis of Thermal Fatigue Crack for Low-Alloy Steel Brake Disc of High-Speed Train

Numerical simulation of rail surface-initiated rolling contact fatigue in the switch panel of railway turnouts

Effect of inhomogeneity on crack initiation for wear-resistant U75V rail treated by laminar plasma

Rough surface rolling contact fatigue crack stress intensity factor calculation for modern rail steels

Numerical tribology of the wheel-rail contact : Application to corrugation defect

Numerical investigation on wheel-rail impact contact solutions excited by rail spalling failure

Gaps, challenges and possible solution for prediction of wheel–rail rolling contact fatigue crack initiation

On the Formation and Damage Mechanism of Rolling Contact Fatigue Surface Cracks of Wheel/rail under the Dry Condition

Investigation on wear and damage characteristics of high-speed rail steel with plasma selective quenching

Influence of initial crack on fatigue crack propagation with mixed mode in U71Mn rail subsurface

Portray rail head surface crack 3D contour through image analysis and morphology reconstruction

Analysis of fatigue crack propagation in rails under combined action of wheel load and residual stress