Abstract:In industrial applications, bolts, serving as crucial com ponents, endure substantial loads and are susceptible to loosening problems exacerbated by intricate external environmental factors. The active sensing method based on wave energy dissipation exhibits pronounced sensitivity to axial load fluctuations in bolts and demonstrates extensive applicability, with its measurement indicators directly applicable for discerning the bolt's status. How ever, environmental factors, notably temperature, can significantly influence signal energy measurements, and the oversight of tem perature impact may result in erroneous state discrimination. To tackle this challenge, this paper introduces a cascaded model com prising a temperature compensation subnetwork and a bolt state discrimination subnetwork. The temperature compensation subnetwork takes temperature and signal energy as inputs and outputs the temperature-compensated signal energy, and conveys the outcomes to the bolt state discrimination subnetwork for state classification. In model design, we quantitatively analyzed the number of convolutional blocks and training epochs for the temperature compensation subnetwork with the aim of enhancing the model's generalization ability, ultimately determining the model architecture. By comparing the experimental results between a single-task model and a model incorporating the temperature compensation subnetwork, we verified the effectiveness of the temperature compensation subnetwork. The experimental outcomes demonstrate that the proposed cascaded model achieved a state classification accuracy of 98.6% on over 1300 temperature-generalized data points.To comprehensively assess our approach, we conducted detailed comparisons with other bolt loosening monitoring methods, elucidating the effectiveness based on data trends and model design. Experimental results demonstrate that the proposed temperature compensation cascaded model accurately identifies bolt states amidst complex temperature variations.

Detecting bolt looseness of flanged joint based on multiple-mode conversion

Bolt Looseness Detection Using SH Guided Wave and Wave Energy Transmission

Multi-bolt looseness monitoring using guided waves: a cross-correlation approach of the wavelet energy envelope

Application of subharmonic resonance for the detection of bolted joint looseness

Bolt Looseness Detection and Localization Using Wave Energy Transmission Ratios and Neural Network Technique

Underwater bolted flange looseness detection using percussion-induced sound and Feature-reduced Multi-ROCKET model

Bolt looseness detection and localization using time reversal signal and neural network techniques

Bolt looseness identification using a knocking acoustic signal

Bolt tightness monitoring using multiple reconstructed narrowband lamb waves combined with piezoelectric ultrasonic transducer

Piezoelectric Transducers for Structural Health Monitoring of Joint Structures in Cylinders: A Wave-Based Design Approach

A nonlinear ultrasonic wave mixing method for looseness detection of bolted joints

Vibration-based looseness identification of bolted structures via quasi-analytic wavelet packet and optimized large margin distribution machine

Improvement of a vibration-based damage detection approach for health monitoring of bolted flange joints in pipelines

Identification of bolt state in lap joint based on propagation model and imaging methods of Lamb waves

Bolt Loosening Status Classification via WaveEnergy Dissipation Measurements withTemperature-Compensated Deep Learning byPiezoelectric Active Sensing

Guided wave based SHM for loosening detection in bolted lap joints with the application of Neural Networks

Bolt loosening detection in a jointed beam using empirical mode decomposition–based nonlinear system identification method

Multi-Bolt Loosening Monitoring Using an Integrated Vibro-Acoustic Modulation Technique

Bolt-looseness detection by a new percussion-based method using multifractal analysis and gradient boosting decision tree

Bolt-loosening Identification by Using Empirical Mode Decomposition and Sample Entropy

Sound Sensing: Generative and Discriminant Model-Based Approaches to Bolt Loosening Detection