Abstract:Currently, porous SiC ceramics have been a focus of interesting research in the field of porous materials due to their excellent structural properties, high strength, high hardness, and superb mechanical and chemical stabilities even at high temperatures and hostile atmospheres. Porous SiC ceramics have been considered as suitable candidate materials for catalyst supports [1-2], hot gas or molten metal filters [3], high temperature membrane reactors [4], thermal insulating materials [5], gas sensors [6] etc. Porous SiC ceramics are fabricated by various methods including partial sintering [7], carbothermal reduction [8-9], replication or pyrolysis of polymeric sponge [10-12], reaction bonding [13] etc. In all these methods SiC needs to be sintered which requires a very high temperature due to the strong covalent nature of the Si-C bond, selective sintering additives, expensive atmosphere, costly and delicate instrumentation. Processing of porous SiC ceramics at low temperature using a simple technique thus becomes necessary. Bonding of SiC can be done at low temperatures by use of different oxide and non-oxide secondary phases. They include silica, mullite, cordierite, silicon nitride, etc. Various sintering additives are used for the formation of variety of secondary oxide bond phases for formations for porous SiC [14-19] Choice of mullite as a bond for SiC has many advantages. Mullite possesses a high melting point (T m = 1850°C) and a low oxygen diffusion coefficient (5.6 x 10 -14 m 2 /sec at 50°C). It has a matching thermal expansion coefficient with SiC (CTE mullite = 5.3 ×10 -6 /K; CTE SiC = 4.7 ×10 -6 /K at RT-1000 °C) and a high strength that can be retained up to a very high temperature. Different sources of aluminum, such as Al 2 O 3 , Al, AlN, and Al (OH) 3 powders were used for the formation of mullite bonded porous SiC ceramics (MBSC) [20-21]. However, the mullitization temperature of 1550 o C is still necessary. In this work, mullite bonded porous SiC ceramics were fabricated by an in situ reaction-bonding process; the mixture of clay and CaCO 3 were chosen as sintering additives to lower the mullitization reaction between Al 2 O 3 and oxidation-derived SiO 2. The effect amount of alumina, sintering temperature and other sintering aids on material property such as porosity/pore size distribution mechanical and micro structural properties of porous oxide bonded SiC ceramics were studied.

Production of porous ceramic from clinoptilolite incorporating aluminum powder

The Effects of Mineral Composition and Sintering Temperature on Synthetic Mullite

Preparation of Fly Ash-Based Porous Ceramic with Alumina as the Pore-Forming Agent

The Fabrication of Porous Mullite Ceramics Based on the Different Sizes of Aluminum Hydroxide

Examination of patterns in obtaining porous structures from submicron aluminum oxide powder and its mixtures

A Simple and Efficient Way to Prepare Porous Mullite Matrix Ceramics Via Directly Sintering SiO2-Al2O3 Microspheres

Compressive Strength and Thermal Conductivity of Porous Mullite Ceramics

Effect of Sintering Temperature on the Structures and Properties of Porous Aluminium Titanate Ceramics

Porosity evaluation and positron annihilation study of mesoporous aluminum oxy-hydroxide ceramics

Preparation and properties of porous mullite-based ceramics fabricated by solid state reaction

Physico-Mechanical and Microstructure Characteristics of Porous Mullite Ceramics

Porous Alumina-Bentonite Ceramics: Effects of Fillers and Molding Technique

Fabrication and Properties of Porous Mullite Ceramics from Directly Sintering Ceramic Microspheres

Optimization of hydrothermal autoclaving parameters for the synthesis of porous ceramics from porcelain tile polishing residue

Sintering behavior of alumina rich cordierite porous ceramics

Optimization of Preparation Procedure for High Temperature Exhaust Gas Filtering Ceramics by Orthogonal Test

Preparation of Al2O3 Ceramics with Long-Range Inter-Locked Platelet Structures Possessing High Porosity and Excellent Mechanical Strength

Microstructure, mechanical and thermo-physical properties of hot-pressed Al2O3-GdAlO3-ZrO2 ceramics with eutectic composition

Impact of Sintering Temperature Variation on Porous Structure of Mo2TiAlC2 Ceramics

The Effect of Bond Phase Additive and Sintering Temperature on the Properties of Mullite Bonded Porous SiC Ceramics

Manufacturing and properties evaluation of Al2O3/ZrO2 granules derived from sodium alginate gelation