Abstract:The transformation of CO/CO2 hydrogenation into high-density sustainable aviation fuel (SAF) represents a promising pathway for carbon emission reduction in the aviation industry but also serves as a method for renewable energy assimilation. However, current hydrocarbon products synthesized through CO/CO2 often focus on various catalytic paths with high selectivity and high conversion rates rather than the synthesis of SAFs with complex components. This study undertakes a thermodynamic investigation into the direct or indirect synthesis of SAFs from CO/CO2 hydrogenation. By analyzing the synthesis of seven aviation fuels defined by the American Society for Testing and Materials (ASTM) D7566 standard, our study reveals a temperature-dependent reduction in the reaction driving force for all products. Specifically, for CO, ΔG transitions from approximately −88.6 J/(mol·K) at 50 °C to 26.7 J/(mol·K) at 500 °C, with the switch from negative to positive values occurring around 390 °C. Similarly, for CO2, ΔG values change from approximately −66.7 J/(mol·K) at 50 °C to 37.3 J/(mol·K) at 500 °C, with the transition point around 330 °C. The thermodynamic favorability for various hydrocarbon products synthesized is also examined, highlighting a transition at temperatures of around 250 °C, beyond which the thermodynamic drive for the synthesis of aromatic compounds increasingly surpasses that of cycloparaffin synthesis. Our findings also underscore that the products with a higher aromatic content yield a lower H2/CO2 ratio, thus reducing hydrogen consumption. The influence of cycloparaffin and aromatic proportions in the typical SAF products on the ΔG is also explored, revealing that an increase in cycloparaffin content in SAFs slightly elevates the ΔG, whereas an increase in aromatic content significantly reduces ΔG, thereby markedly enhancing the thermodynamic drive of the CO/CO2 hydrogenation reaction. These findings underscore the thermodynamic preference for synthesizing SAF with a higher proportion of aromatic compounds, shedding light on potential pathways for optimizing fuel synthesis to improve efficiency. Finally, the thermodynamic challenges and potential solutions involved in synthesizing SAFs via specific intermediate compounds are discussed, presenting opportunities for more strategic process schemes in industrial scenarios.

Highly Selective Hydrodeoxygenation Catalyst for Sustainable Aviation Fuel Production from Used Cooking Oil

Continuous Hydrodeoxygenation of Lignin to Jet-Range Aromatic Hydrocarbons

Catalytic Decarboxylation and Aromatization of Oleic Acid over Ni/AC Without an Added Hydrogen Donor

Catalytic hydroprocessing of waste cooking oil for the production of drop-in aviation fuel and optimization for improving jet biofuel quality in a fixed bed reactor

Co-hydrotreating of Algae and Used Engine Oil for the Direct Production of Gasoline and Diesel Fuels or Blending Components

Hydrodeoxygenation of safflower oil over cobalt-doped metal oxide catalysts for bio-aviation fuel production

Direct Production of Sustainable Aviation Fuel by Deoxygenation and Isomerization of Triglycerides over Bifunctional Ir–ReOx/SAPO‐11 Catalyst

Catalytic Deoxygenation of Waste Cooking Oil for Sustainable Bio-Jet Fuel: A Comparative Study of Ni-Co/SBA-15 and Ni-Co/SBA-15-SH catalysts

Catalytic pyrolysis of coconut oil with Ni/SBA-15 for the production of bio jet fuel

Highly selective production of bio-jet fuel grade alkanes over Fe/SiO2-Al2O3 solid acid catalyst under solvent-free conditions

Synthesis of Aviation Biofuel Precursors from Biomass-Derived Ketones: Substrate Adsorption Configuration-Catalytic Activity

Synthesis of Sustainable Aviation Biofuels Via Catalytic Hydropyrolysis of Lignin

Hydrodeoxygenation of Isoeugenol-derived Model Compound over Carbon-supported Pt and Pt-SnS Catalysts for the Production of Sustainable Jet Fuel

Cycloalkane-Rich Sustainable Aviation Fuel Production via Hydrotreating Lignocellulosic Biomass-derived Catalytic Fast Pyrolysis Oils

Thermodynamic Insights into Sustainable Aviation Fuel Synthesis via CO/CO2 Hydrogenation

The production of renewable aviation fuel from waste cooking oil. Part II: Catalytic hydro-cracking/isomerization of hydro-processed alkanes into jet fuel range products

Response optimisation of TiO 2 -supported bimetallic NiCo catalyst for the cracking and deoxygenation of waste cooking oil into jet-fuel range hydrocarbon fuels under non-hydrogen environment

SBA-15 and carbon supported nickel, heteropoly acid catalysts for the hydrodeoxygenation of lignin derived trans-anethole to sustainable aviation fuel

Efficient and Stable Ni-Cu Catalysts for Ex Situ Catalytic Pyrolysis Vapor Upgrading of Oleic Acid into Hydrocarbon: Effect of Catalyst Support, Process Parameters and Ni-to-Cu Mixed Ratio

Green hydrocarbons fuel production from agricultural waste biomass in the presence of a novel heterogeneous catalyst

Hydroprocessing of biomass feedstock over sulfided CoMo-, NiMo-, and NiW-supported catalysts for bio-jet fuel component production: a review