Abstract:The direct-drive selective compliance assembly robot arm (SCARA) is widely used in high-end manufacturing fields, as it omits the mechanical transmission structures and has the advantages of high positioning accuracy and fast movement speed. However, due to the intensifying dynamic coupling problem of structures in the direct-drive SCARA, the permanent magnet synchronous motors (PMSMs) located at the joints will take on nonstationary loads, which causes excessive internal temperature and reduces the lifetime of PMSMs. To address these issues, the lifetime prediction of PMSMs is studied. The kinematic and dynamic models of the SCARA are established to calculate the torque curve required by the PMSM in specific typical motion tasks. Additionally, considering thermal stress as the main factor affecting lifetime, accelerated degradation tests are conducted on insulation material. Then, the reliability function of the PMSM is formulated based on the accelerated degradation model. Based on the parameters and working conditions of the PMSM, the temperature field distribution is obtained through simulation. The maximum temperature is used as the reference temperature to conduct reliability evaluation and lifetime prediction of the PMSM. The research results show that for a typical point-to-point task, the PMSM can run for 102,623 h while achieving the reliability requirement of 0.99.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is the internal temperature rise problem of the permanent magnet synchronous motor (PMSM) in the Direct - Drive Selective Compliance Assembly Robot Arm (Direct - Drive SCARA) when performing typical point - to - point tasks due to complex driving currents and irregular output torques, which seriously affects the lifespan of the PMSM. Specifically, the paper focuses on: 1. **Dynamic coupling problem**: In the Direct - Drive SCARA, due to the aggravated dynamic coupling problem of the structure, the PMSM located at the joint will bear unsteady loads, resulting in an excessively high internal temperature and thus shortening the service life of the PMSM. 2. **Insulation thermal aging**: The insulation system of the motor is a key factor affecting its lifespan. Statistical data show that approximately 30% of motor failures are related to winding insulation. For low - voltage PMSM, thermal stress is the main aging mechanism affecting the insulation system. When the motor operates under overheating conditions, the thermal expansion of the insulation material will generate defects, which are likely to lead to insulation breakdown and then cause motor interruption. 3. **Lifespan prediction**: In order to address the above problems, the paper studies the lifespan prediction method of PMSM. By establishing the kinematic and dynamic models of SCARA, the PMSM torque curves required for specific typical motion tasks are calculated. At the same time, considering that thermal stress is the main factor affecting lifespan, an accelerated degradation test of the insulation material is carried out, and a reliability function of PMSM is established based on the accelerated degradation model. The temperature field distribution of PMSM is obtained through simulation, and the highest temperature is used as the reference temperature for reliability assessment and lifespan prediction. The main objective of the paper is to improve the operating efficiency of the motor and reduce the economic losses and maintenance costs caused by equipment failures by establishing a reasonable reliability assessment model.

Lifetime Prediction of Permanent Magnet Synchronous Motor in Selective Compliance Assembly Robot Arm Considering Insulation Thermal Aging

Robustness Analysis and Enhancement of Deadbeat Predictive Control for Permanent Magnet Linear Synchronous Machines with Asymmetric Model

CFD-based Temperature Field Analysis and Lifetime Prediction of Brushless DC Motor

Reliability-Oriented Multi-Objective Optimization of Electrical Machines Considering Insulation Thermal Lifetime Prediction

Thermomechanical Rotor Fatigue of an Interior Permanent Magnet Synchronous Motor

Reliability-Oriented Multiobjective Optimization of Electrical Machines Considering Insulation Thermal Lifetime Prediction

Multi-field Coupled Analysis of a Permanent Magnet Synchronous Motor: Application to High Speed Rail Traction

Influence of Load Characteristics on Three-Phase Short Circuit and Demagnetization of Surface-Mounted PM Synchronous Motor

Electromagnetic and Thermal Coupling Analysis of a Water-Cooled Double-Sided Permanent Magnet Linear Synchronous Motor

Identification of failure modes in interior permanent magnet synchronous motor under accelerated life test based on dual sensor architecture

Design of A Novel Permanent Magnet Linear Synchronous Motor with Segmented Armature Core for Ropeless Lifter

Modeling and Investigation of Thermal Characteristics of A Water-Cooled Permanent-Magnet Linear Motor

Thrust Optimization and Thermal Analysis of a Water-Cooled Double-Sided Permanent Magnet Linear Synchronous Motor

Preparation Analysis of the Overall Characteristics for High Power PMSM with Multi Phase Units

Model Predictive Current Control with Adaptive-Adjusting Timescales for PMSMs

On-Line Identification of Moment of Inertia for Permanent Magnet Synchronous Motor Based on Model Reference Adaptive System

Nonlinear Analytical Model-Embedded Optimal Design for ER-PMSM

Study on Accelerated Degradation Testing for Predicting the Life of Induction Motors

Recycling and remanufacturing technology analysis of permanent magnet synchronous motor

Temperature Analysis for the Asymmetric Six-Phase Permanent Magnet Synchronous Motor in Healthy and Fault-Tolerant Modes

Lifetime Model for Inverter-fed Electrical Machines Windings Including Thermal Aging and Partial Discharge Risk