Abstract:Cementitious and recycled materials that have the potential to improve various properties of concrete have attracted the attention of many researchers recently. Different types of cementitious and recycled materials seem to possess certain unique properties to change cement concrete. This experimental study aims to investigate the impact of ground granulated blast furnace slag (GGBFS) and corn cob ash (CCA) as a partial replacement material for Portland cement (PC) and fine aggregate (FA), respectively, on fresh and hardened concrete properties, as well as the embodied carbon of concrete. The concrete mix was blended with 5–20% of GGBFS and 10–40% of corn cob ash, both individually and combined. A total of 300 concrete specimens were made to achieve the targeted strength of 25 MPa at a 0.50 water/cement ratio and cured at 28 days. It is observed that the workability of fresh concrete is lowered as the dosages of GGBFS and CCA increase in the mixture. Moreover, the compressive and split tensile strengths are augmented by 10.94% and 9.15%, respectively, at 10% of GGBFS by the weight of PC at 28 days. Similarly, the compressive and split tensile strengths are augmented by 11.62% and 10.56%, respectively, at 30% of CCA by the weight of FA at 28 days. Moreover, the combined use of 10% of GGBFS as a cementitious ingredient along with 30% of fine aggregate replaced with CCA in concrete provides the highest compressive and splitting tensile strength, with 16.98% and 13.38% at 28 days, respectively. Furthermore, the density and water absorption of concrete were reduced with increasing dosages of GGBFS and FA in concrete at 28 days. In addition, the embodied carbon and energy were also reduced as the replacement content of GGBFS along with CCA increased in concrete. It is concluded that 10% of GGBFS and 30% of CCA are the optimum percentages for structural applications to reduce the use of cement as well as the cost of the project.

Compressive Strength and Microstructural Development of Cementitious Mixtures Incorporating Ultrafine Granulated Blast Furnace Slag

Mechanical and Durability Properties of Mortars Incorporating Red Mud, Ground Granulated Blast Furnace Slag, and Electric Arc Furnace Dust

Hydration and Strength Development in Blended Cement with Ultrafine Granulated Copper Slag.

Evaluation of compressive strength and chloride permeability of cement-based materials with high-volume compound mineral admixtures

Synergistic Effects of Silica Fume and Slag on the Microstructure and Mechanical Behaviors of Ultra-High-strength and High-Ductility Cementitious Composites

Mechanical Properties, Microstructure and Life-Cycle Assessment of Eco-Friendly Cementitious Materials Containing Circulating Fluidized Bed Fly Ash and Ground Granulated Blast Furnace Slag

Study on Strength of EMDS-GBFS Composite Cement

Enhancement of ultra-fine slag on compressive strength of solid waste-based cementitious materials: Towards low carbon emissions

Long -term hydration and microstructure evolution of blended cement containing ground granulated blast furnace slag and waste clay brick

Fresh and Hardened Properties of Concrete Incorporating Binary Blend of Metakaolin and Ground Granulated Blast Furnace Slag as Supplementary Cementitious Material

Preparation of steel slag-based cementitious materials compounded with GBFS and phosphogypsum: mix design, hydration, and microstructure characteristic

Effects of Steel Slag Admixture with Ggbfs on Performances of Cement Paste and Mortar

Effects of SCMs Particles on the Compressive Strength of Micro-Structurally Designed Cement Paste: Inherent Characteristic Effect, Particle Size Refinement Effect, and Hydration Effect

Mechanical Activation of Granulated Copper Slag and Its Influence on Hydration Heat and Compressive Strength of Blended Cement.

Effect of steel slag powder, fly ash, and silica fume on the mechanical properties and durability of cement mortar

The Properties of the Self-Compacting Concrete with Fly Ash and Ground Granulated Blast Furnace Slag Mineral Admixtures

Utilization of Corn Cob Ash as Fine Aggregate and Ground Granulated Blast Furnace Slag as Cementitious Material in Concrete

Self-consolidating paste systems using ground granulated blast furnace slag and limestone powder mineral admixtures

Microstructural and Compressive Strength Analysis for Cement Mortar with Industrial Waste Materials

Properties of Concrete Containing Large Volumes of Ground Granulated Blast Furnace Slag and Ground Coal Bottom Ash with Lime Kiln Dust

Synthesis and Characterization of Cemented Paste Backfill: Reuse of Multiple Solid Wastes