Abstract:Interface engineering has been recognized as a very effective method to simultaneously improve both efficiency and stability in perovskite solar cells (PSCs). In this work, we report using an excellent small molecular material tetraphenyldibenzoperiflanthene (DBP) to modify the perovskite/Spiro-OMeTAD interface to achieve significantly improved solar cell performance. It is found that the ultrathin DBP interlayer accelerates hole transfer across the FAxMA1–xPbInBr3–n/Spiro-OMeTAD interface and effectively reduces the nonradiative recombination. The Kelvin probe force microscopy and energy band analyses reveal that the DBP modification helps build better matched energy level alignment and smaller energy loss for more fluent hole transport. Consequently, the DBP-treated PSCs achieve an enhanced open-circuit voltage as high as 1.184 V and fill factor as high as 78.2% as well as the negligible hysteresis. The champion PSC made with DBP gives a PCE of 21.49%, significantly increased compared to 19.68% from the reference cell without the modification. Moreover, DBP also serves as a water-resistant protection for improved moisture stability. The PCE of the DBP-treated cells without encapsulation remains more than 84% of its initial efficiency, which is significantly higher than that of the reference PSCs (65%) after 20 days of storage under an air environment with 50–65% humidity. This study provides an effective interface modification material to address notorious stability problems in Spiro-OMeTAD-based PSCs.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c12544?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c12544</a>.SEM images of the perovskite film treated by different concentrations of DBP; UV–vis spectra of the pristine and DBP-treated perovskite films; XRD patterns of the pristine and DBP-treated perovskite films; time-resolved PL spectra of different kinds of the perovskite films; and further information on device performance, J–V hysteresis, and stability (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c12544/suppl_file/am0c12544_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Polyethylene glycol dodecyl ether as interfacial modifier for improving efficiency of perovskite solar cells

Interfacial Engineering Based on Polyethylene Glycol and Cuprous Thiocyanate Layers for Efficient and Stable Perovskite Solar Cells

Enhanced performance of perovskite solar cells with multifunctional organic interface conditioner

Bulky ammonium iodide and in-situ formed 2D Ruddlesden-Popper layer enhances the stability and efficiency of perovskite solar cells

Synergistic enhancement of efficiency and stability of perovskite solar cells via dual interface modification

An Interface Co-modification Strategy for Improving the Efficiency and Stability of CsPbI 3 Perovskite Solar Cells

Enhanced Efficiency and Stability of Perovskite Solar Cells by 2D Perovskite Vapor-Assisted Interface Optimization

Regulating molecular stacking to construct a superior interfacial contact for highly efficient and stable perovskite solar cells

Interface Modification Via a Hydrophobic Polymer Interlayer for Highly Efficient and Stable Carbon-Based Inorganic Perovskite Solar Cells

Improving efficiency of polymer hole transport layer based perovskite solar cells via interfacial modification

Modulating Interfacial Carrier Dynamics via Spatial Conformation toward Efficient and Stable Perovskite Solar Cells

High-Efficiency Perovskite Solar Cells with Improved Interfacial Charge Extraction by Bridging Molecules

Interlayer Modification Using Phenylethylamine Tetrafluoroborate for Highly Effective Perovskite Solar Cells

Ethyl Thioglycolate Assisted Multifunctional Surface Modulation for Efficient and Stable Inverted Perovskite Solar Cells

Improving Efficiency and Stability of Perovskite Solar Cells Enabled by A Near-Infrared-Absorbing Moisture Barrier

Interface Modification of a Perovskite/Hole Transport Layer with Tetraphenyldibenzoperiflanthene for Highly Efficient and Stable Solar Cells

Multifunctional Small Molecule as Buried Interface Passivator for Efficient Planar Perovskite Solar Cells

Defect control based on interfacial passivation via post-treatment of 1-ethylpyridine hydrobromide for achieving efficient and stable perovskite solar cells

Toward Efficient and Stable Perovskite Solar Cells by 2D Interface Energy Band Alignment

Interfacial Dipole Poly(2-ethyl-2-oxazoline) Modification Triggers Simultaneous Band Alignment and Passivation for Air-Stable Perovskite Solar Cells

Nonpolar and Ultra-long-chain Ligand to Modify the Perovskite Interface toward High-Efficiency and Stable Wide Bandgap Perovskite Solar Cells