Abstract:The hydraulic jump phenomenon plays a significant role in dissipating the energy of the upstream current in either natural or artificial waterways. River’s bed roughness is defined as a key parameter that affects the characteristics of the hydraulic jump. In this study, a non-linear regression algorithm was developed to predict the sequent depth ratio of hydraulic jumps over a smooth and rough bed surface using the experimental hydraulic data extracted from the previous studies. Four popular machine learning techniques, known as adaptive network-based fuzzy inference system (ANFIS), ANFIS-Particle Swarm Optimization (ANFIS-PSO), bayesian model averaging (BMA), least absolute shrinkage and selection operator (LASSO), are applied to check the accuracy of the proposed algorithm. The dimensional analysis and Gamma Test model are used to select the effective parameters on the hydraulic jump. In this study, four major parameters named the roughness height (ks), hydraulic radius (R), velocity and Froude number at the upstream of the hydraulic jump control volume were selected as more effective parameters. To compare the performance of the models in prediction of both sequent hydraulic depths, the coefficient of determination, root mean square error (RMSE), mean error, Mean Absolute Error and Nash–Sutcliffe efficiency (NSE) were calculated in both training and testing subsets. It is shown that the proposed model, along with two other non-linear methods, ANFIS and ANFIS-PSO, predicted the hydraulic jump sequent depth ratio more accurately compared to the linear regression techniques, BMA and LASSO. However, the statistical measures show an acceptable accuracy for the linear regression techniques. The results show that the proposed model increases the correlation between observed and predicted values up to 0.987 and decreases the RMSE to 0.324. Simultaneously, the last two linear techniques have RMSE, correlation coefficient 0.333 and 0.98, respectively. Finally, a new non-linear formula addressing the hydraulic jump sequent depth ratio over smooth and rough beds have been proposed. A comparison between the resulted formula of the present study with the previous studies proves the accuracy of the developed equation. Moreover, a dimensionless primary roughness coefficient is presented as a non-linear function of the roughness height (ks) and hydraulic radius (R) parameters.

Reconstruction and analysis of negatively buoyant jets with interpretable machine learning

Predicting buoyant jet characteristics: a machine learning approach

Water jet angle prediction in supersonic crossflows: Euler–Lagrange and machine learning approaches

Applications and Interpretations of Different Machine Learning Models in Runoff and Sediment Discharge Simulations

Machine learning-aided characterization of microbubbles for venturi bubble generator

RANS turbulence model development using CFD-driven machine learning

Prediction of Depth-Averaged Velocity for Flow Though Submerged Vegetation Using Least Squares Support Vector Machine with Bayesian Optimization

Enhancing airflow dynamics in airjet spinning: A machine learning approach to optimize nozzle design

Machine Learning-augmented Predictive Modeling of Turbulent Separated Flows over Airfoils

Deployment of interpretable machine learning in a water treatment device - feasibility exploration of performance enhancement

Assessment of Machine-Learned Turbulence Models Trained for Improved Wake-Mixing in Low-Pressure Turbine Flows

Machine learning for accelerating 2D flood models: Potential and challenges

Regression models for predicting the effect of trash rack on flow properties at power intakes

Dependence of critical heat flux in vertical flow systems on dimensional and dimensionless parameters using machine learning

Comparative Study on the Machine Learning and Regression-Based Approaches to Predict the Hydraulic Jump Sequent Depth Ratio

Advanced Hybrid Techniques for Predicting Discharge Coefficients in Ogee-Crested Spillways: Integrating Physical, Numerical, and Machine Learning Models

Non-parametric Surrogate Model Method Based on Machine Learning with Application on Low-Pressure Steam Turbine Exhaust System

Applicability of several machine learning models in estimation of vortex tube trapping efficiency

Applying Machine Learning Techniques: Uncertainty Quantification in Nonlinear Dynamics Characters Predictions via Gated Recurrent Unit-Based Reduced-Order Models

Numerical Simulation Of Free Surface Water Waves Around Wavy Hydrofoils: Prediction Of Hydrodynamic Coefficients Using Machine Learning

Discharge coefficient estimation of modified semi-cylindrical weirs using machine learning approaches