Abstract:Due to the intrinsic complexity of wastewater treatment plant (WWTP) processes, it is always challenging to respond promptly and appropriately to the dynamic process conditions in order to ensure the quality of the effluent, especially when operational cost is a major concern. Machine Learning (ML) methods have therefore been used to model WWTP processes in order to avoid various shortcomings of conventional mechanistic models. However, to the best of the authors' knowledge, no ML applications have focused on investigating how operational factors can affect effluent quality. Additionally, the time lags between process steps have always been neglected, making it difficult to explain the relationships between operational factors and effluent quality. Therefore, this paper presents a novel ML-based framework designed to improve effluent quality control in WWTPs by clarifying the relationships between operational variables and effluent parameters. The framework consists of Random Forest (RF) models, Deep Neural Network (DNN) models, Variable Importance Measure (VIM) analyses, and Partial Dependence Plot (PDP) analyses, and uses a novel approach to account for the impact of time lags between processes. Details of the framework are provided along with a demonstration of its practical applicability based on a case study of the Umeå WWTP in Sweden involving a large number of samples (105763) representing the full scale of the plant's operations. Two effluent parameters, Total Suspended Solids in effluent (TSSe) and Phosphate in effluent (PO4e), and thirty-two operational variables are studied. RF models are developed, validated using DNN models as references, and shown to be suitable for VIM and PDP analyses. VIM identifies the variables that most strongly influence TSSe and PO4e, while PDP elucidates their specific effects on TSSe and PO4e. The major findings are: (1) Influent temperature is the most influential variable for both TSSe and PO4e, but it affects them in different ways; (2) PO4e depends strongly on the TSS in aeration basins – higher TSS concentrations in aeration basins generally promote PO4 removal, but excess TSS can have negative effects; (3) In general, the impact of TSS in aeration basins on TSSe and PO4e increases with the distances of the basin from the merging outlet, so more attention should be paid to the TSS concentration in the third or fourth aeration basins than the first and second ones; (4) Returning excessive amounts of sludge through the second return sludge pipe should be avoided because of its adverse impact on TSSe removal. These results could support the development of more advanced control strategies to increase control precision and reduce running costs in the Umeå WWTP and other similarly configured WWTPs. The framework could also be applied to other parameters in WWTPs and industrial processes in general if sufficient high-resolution data are available.

Deployment of interpretable machine learning in a water treatment device - feasibility exploration of performance enhancement

Machine learning regression-based prediction model for the autonomous control of coagulant dosing in smart water purification plants

A novel coupling interpretable machine learning framework for water quality prediction and environmental effect understanding in different flow discharge regulations of hydro-projects

A machine learning framework to improve effluent quality control in wastewater treatment plants

Optimizing wastewater treatment plant operational efficiency through integrating machine learning predictive models and advanced control strategies

Enhancing wastewater treatment efficiency through machine learning-driven effluent quality prediction: A plant-level analysis

Operational parameter prediction of electrocoagulation system in a rural decentralized water treatment plant by interpretable machine learning model

Exploring potential machine learning application based on big data for prediction of wastewater quality from different full-scale wastewater treatment plants

Advanced machine learning application for odor and corrosion control at a water resource recovery facility

Evaluating the Performance of Machine Learning Approaches to Predict the Microbial Quality of Surface Waters and to Optimize the Sampling Effort

Water quality estimates using machine learning techniques in an experimental watershed

Machine Learning‐Guided Prediction of Desalination Capacity and Rate of Porous Carbons for Capacitive Deionization

Modelling of wastewater treatment, microalgae growth and harvesting by flocculation inside photo bioreactor using machine learning technique

Membrane fouling prediction and uncertainty analysis using machine learning: A wastewater treatment plant case study

Machine learning facilitated the conceptual design of an alum dosing system for phosphorus removal in a wastewater treatment plant

Machine learning-based prediction of biological oxygen demand and unit electricity consumption in different-scale wastewater treatment plants

Water plant optimization control system based on machine learning

Machine Learning for Heavy Metal Removal from Water: Recent Advances and Challenges

Using machine learning architecture to optimize and model the treatment process for saline water level analysis

Integrating water quality and streamflow into prediction of chemical dosage in a drinking water treatment plant using machine learning algorithms

Predicting Micropollutant Removal by Reverse Osmosis and Nanofiltration Membranes: Is Machine Learning Viable?