Abstract:With the explosive proliferation of connected devices and mobile users in the Internet-of-things, multiple access techniques are urged to be developed for the next generation wireless communications. Recently, rate-splitting multiple access (RSMA) has been a promising communication technology that holds advantages of strong robustness, low complexity, and high spectral efficiency, which can be integrated with the indoor visible light communication (VLC) broadcast system to compensate for the shortcomings of limited modulation bandwidth of LEDs. However, the research on the RSMA-based VLC systems is still in its infancy and there exist various problems to be explored. To benefit from the RSMA technique, this paper investigates the energy efficiency optimizations for both single-cell and multi-cell RSMA-based VLC broadcast systems. Specifically, these two systems are modeled, where the VLC broadcast channel follows Lambertian radiation model, and the splitting design and successive interference cancellation of RSMA are employed to mitigate the multi-user interference. Especially for multi-cell networks, the zero-forcing approach is adopted to eliminate the inter-cell interference. To maximize the energy efficiency, the precoding and power allocation problems are formulated for single-cell and multi-cell networks while accommodating multiple constraints including dynamic operation ranges of LEDs, QoS requirements, and interference elimination. For solving these non-convex fractional problems, two pieces of successive convex approximation (SCA)-based algorithms are proposed, in which the variable transformation and linear approximation are adopted. Simulation results indicate that the proposed schemes can achieve superior energy efficiency with fast convergence for various network loads and user deployments.

Robust Beamforming Design for Rate Splitting Multiple Access-Aided MISO Visible Light Communications

Robust Max-Min Fair Beamforming Design for Rate Splitting Multiple Access-aided Visible Light Communications

Beamforming Design for Secure MISO Visible Light Communication Networks With SLIPT

Intelligent Omni-Surface Aided Rate Splitting Multiple Access

Energy Efficient Rate Splitting Multiple Access (RSMA) with Reconfigurable Intelligent Surface.

Max-Min Fairness in Rate-Splitting Multiple Access-Based VLC Networks with SLIPT

Secure Beamforming for MISO Visible Light Communications With ISI and NLoS Components

Multi-Functional RIS for Sum-Rate Maximization in Rate-Splitting Multiple Access Networks

Downlink Sum-Rate Maximization for Rate Splitting Multiple Access (RSMA).

Globally Optimal Spectrum- and Energy-Efficient Beamforming for Rate Splitting Multiple Access

A Robust Deep Learning-Based Beamforming Design for RIS-Assisted Multiuser MISO Communications with Practical Constraints

Robust Secure Beamforming Design for Multi-RIS-Aided MISO Systems with Hardware Impairments and Channel Uncertainties

Rate-Splitting Multiple Access for Multigroup Multicast and Multibeam Satellite Systems

Rate Splitting Multiple Access: Optimal Beamforming Structure and Efficient Optimization Algorithms

Energy Efficiency Optimization for Rate-Splitting Multiple Access-Based Indoor Visible Light Communication Networks

Performance Optimization for Intelligent Reflecting Surface Assisted Multicast MIMO Networks

Max-Min Fairness and PHY-Layer Design of Uplink MIMO Rate-Splitting Multiple Access with Finite Blocklength

Secrecy Energy Efficiency Maximization in IRS-Assisted VLC MISO Networks with RSMA: A DS-PPO approach

NOMA-Based MISO Visible Light Communication Systems with Optical Intelligent Reflecting Surface: Joint Active and Passive Beamforming Design

Optimal Beamforming Structure for Rate Splitting Multiple Access

Rate-Splitting-Based Generalized Multiple Access for Band-Limited Multi-User VLC