Abstract:Densely deployed light emitting diodes (LEDs) typically lead to high spatial correlation in multiple-input multiple-output (MIMO) visible light communication (VLC) systems. Although precoding can effectively alleviate the spatial correlation issue, most existing precoding algorithms require a dedicated baseband chain for each LED, leading to high energy consumption and hardware complexity when a large number of LEDs are used. In this paper, a successive interference cancellation (SIC)-based precoding scheme with sub-connected architecture (SIC-SA) is proposed. In the considered model, each baseband chain is connected to an LED sub-array containing multiple LEDs to reduce the complexity. Since, in this case, SIC-based precoding can only determine the signal of each baseband chain for an LED sub-array, while its target is to mitigate the spatial correlation between individual LEDs, the electrical/optical power of each LED must also be jointly optimized to accomplish the target. This joint SIC-based precoding, power allocation, and direct current offset design problem is formulated as an achievable sum rate maximization problem under dimming control and electrical power constraints. A two-step iterative algorithm is proposed to solve this problem. In the first step, the SIC-based precoding is designed to alleviate the multi-user interference. In the second step, the power allocation of LEDs is optimized by matrix decomposition and convex optimization, and a closed-form solution of DC offset is derived. Furthermore, considering the dynamic scenarios, a SIC-based precoding scheme with dynamic sub-connected architecture (SIC-DSA) is proposed, in which a switch network is used to adaptively adjust the LED sub-array structure based on the channel state information. Simulation results show that the proposed SIC-SA and SIC-DSA respectively achieve 0.1340 bps/Hz/W and 0.1305 bps/Hz/W energy efficiency gains over the zero-forcing precoding scheme with SA, when the signal-to-noise ratio is 30 dB.

NOMA-Based MISO Visible Light Communication Systems with Optical Intelligent Reflecting Surface: Joint Active and Passive Beamforming Design

Optical Intelligent Reflecting Surface Configuration for NOMA-Based MISO VLC Systems

Sum Rate Maximization for NOMA-Based VLC With Optical Intelligent Reflecting Surface

Capacity Characterization Analysis of Optical Intelligent Reflecting Surface Assisted MISO VLC

Optical Intelligent Reflecting Surface Assisted MIMO VLC: Channel Modeling and Capacity Characterization

Optimal Resource Management for NOMA-Based Visible Light Communication Systems with Shot Noise

Beamforming Design for Secure MISO Visible Light Communication Networks With SLIPT

Intelligent Reflecting Surface for MIMO VLC: Joint Design of Surface Configuration and Transceiver Signal Processing

Optical STAR-RIS-Aided VLC Systems: RSMA Versus NOMA

Joint SIC-Based Precoding and Sub-Connected Architecture Design for MIMO VLC Systems

Physical Layer Security in NOMA-Based VLC Systems with Optical Intelligent Reflecting Surface: A Max-Min Secrecy Data Rate Perspective

Simultaneous Lightwave Information and Power Transfer for OIRS-Aided VLC System

A Novel Visible Light Communication Channel Compensation and Reconstruction Algorithm for Linear Decomposed CPM Signals

Optical IRS for Visible Light Communication: Modeling, Design, and Open Issues

Secure Beamforming for MISO Visible Light Communications With ISI and NLoS Components

An Intelligent Reflecting Surfaces Based Iterative PhC‐MIMO System for Atmospheric Optical Channels

Robust Beamforming Design for Rate Splitting Multiple Access-Aided MISO Visible Light Communications

Optical MIMO Communication Based on Joint Control of Base Station and OPA-Type OIRS

Intelligent Reflecting Surface Enhanced Millimeter-Wave NOMA Systems

Research on Energy Efficiency Optimization of Visible Light Communication Based on Non-Orthogonal Multiple Access

Joint Resource Management for Intelligent Reflecting Surface–Aided Visible Light Communications