Abstract:Bacterial cellulose (BC) had been considered as a promising Pickering stabilizer for its non-toxicity, high purity, and biocompatibility. The electron beam irradiation (EBI) technology had gained significant attention in the field of cellulose degradation due to its operational convenience and mild reaction conditions. Pickering emulsions using BC degraded by EBI as Pickering stabilizers were successfully prepared. Irradiated bacterial cellulose nanofibers (IBCNFs) exhibited a high aspect ratio(30–80 μm in length and 21–109 nm in width) and high absolute zeta potential (-50 mV). The optimal emulsification performance of IBCNFs was observed at an irradiation dosage of 100 kGy (IBC-100). The emulsions based on IBC-100 achieved an EI value of 96.15 ± 0.19%, while those based on IBC-500 obtained an EI value of 59.93 ± 1.47%. Stable Pickering emulsions were prepared when the concentration of IBC-100 stabilizer exceeded 0.3 wt% with a fixed oil phase of 30%, or when the rapeseed oil phase was below 50% while maintaining a fixed suspension of 0.5 wt% IBCNFs. Confocal laser scanning microscopy (CLSM) demonstrated that IBCNFs facilitated the formation of a dense interfacial layer at the oil-water interface and formed a three-dimensional network within the water phase. Which effectively hindered the aggregation and flocculation between individual oil droplets. Furthermore, rheological findings demonstrated that emulsions possessed primarily exhibited properties of elasticity, and their gel strength could be enhanced by adjusting the irradiation dosages of IBCNFs. Moreover, environmental stability experiments indicated that IBCNFs-based emulsions exhibited exceedingly high temperature (20–80 °C) and pH tolerance (4–12). Flocculation occurred under high acid (pH = 2) conditions and at high ionic levels (≥ 40 mM NaCl), without causing disruption to the emulsion droplet structure. This study provided an innovative approach to preparing cellulose nanofibers with high aspect ratio, which could be utilized as emulsion stabilizers. The study also demonstrated that Pickering emulsions based on IBCNFs exhibit excellent stability and rheological properties. IBCNFs have promising potential to serve as a natural Pickering emulsifier for stabilizing oil-in-water emulsions in various food applications, cosmetic and pharmaceutical formulations.

Silanized modified cellulose: preparation and evaluation of O/W Pickering emulsion stabilizers

Characterization and stability of Pickering emulsions stabilized with esterified cellulose nanofibrils

Impact of hydrophobically modified cellulose nanofiber on the stability of Pickering emulsion containing insect protein

Cellulose nanofibrils-stabilized food-grade Pickering emulsions: Clarifying surface charge's contribution and advancing stabilization mechanism understanding

Sustainable production of cellulose nanofibrils from Kraft pulp for the stabilization of oil-in-water Pickering emulsions

Pickering emulsion stabilized with fibrous nanocelluloses: Insight into fiber flexibility-emulsifying capacity relations

Pickering Emulsion Stabilized By Hydrophobically Modified Spherical Cellulose Nanocrystals With Special Response To pH

Cellulose nanofiber from pomelo spongy tissue as a novel particle stabilizer for Pickering emulsion

Depletion Effects and Stabilization of Pickering Emulsions Prepared from a Dual Nanocellulose System

Pickering emulsions co-stabilised by cellulose nanofibres and nicotinamide mononucleotide

Pickering emulsion emulsified using novel cellulose nanofibers significantly lowers the lipid release rate and cellular absorption

Pickering emulsions stabilized by cellulose nanofibers with tunable surface properties for thermal energy storage

Pickering emulsion stabilized by cellulosic fibers: Morphological properties-interfacial stabilization-rheological behavior relationships

Nanocellulose-stabilized Pickering emulsions : fabrication, stabilization, and food applications

Residual lignin in cellulose nanofibrils enhances the interfacial stabilization of Pickering emulsions

Pickering emulsions stabilized by aldehyde-modified cellulose nanofibrils: Stabilization and asphalt recovery application

Amphiphilic Cellulose Nanocrystals for Enhanced Pickering Emulsion Stabilization.

A novel Pickering emulsion gels stabilized by cellulose nanofiber/dihydromyricetin composite particles: Microstructure, rheological behavior and oxidative stability

Stabilization of Pickering emulsions with bacterial cellulose nanofibrils (BCNFs) fabricated by electron beam irradiation

CO 2 responsive self-standing Pickering emulsion gel stabilized with rosin-based surfactant modified cellulose nanofibrils

Emulsions stabilized by nanofibers from bacterial cellulose: New potential food-grade Pickering emulsions