Abstract:Bacterial cellulose (BC) had been considered as a promising Pickering stabilizer for its non-toxicity, high purity, and biocompatibility. The electron beam irradiation (EBI) technology had gained significant attention in the field of cellulose degradation due to its operational convenience and mild reaction conditions. Pickering emulsions using BC degraded by EBI as Pickering stabilizers were successfully prepared. Irradiated bacterial cellulose nanofibers (IBCNFs) exhibited a high aspect ratio(30–80 μm in length and 21–109 nm in width) and high absolute zeta potential (-50 mV). The optimal emulsification performance of IBCNFs was observed at an irradiation dosage of 100 kGy (IBC-100). The emulsions based on IBC-100 achieved an EI value of 96.15 ± 0.19%, while those based on IBC-500 obtained an EI value of 59.93 ± 1.47%. Stable Pickering emulsions were prepared when the concentration of IBC-100 stabilizer exceeded 0.3 wt% with a fixed oil phase of 30%, or when the rapeseed oil phase was below 50% while maintaining a fixed suspension of 0.5 wt% IBCNFs. Confocal laser scanning microscopy (CLSM) demonstrated that IBCNFs facilitated the formation of a dense interfacial layer at the oil-water interface and formed a three-dimensional network within the water phase. Which effectively hindered the aggregation and flocculation between individual oil droplets. Furthermore, rheological findings demonstrated that emulsions possessed primarily exhibited properties of elasticity, and their gel strength could be enhanced by adjusting the irradiation dosages of IBCNFs. Moreover, environmental stability experiments indicated that IBCNFs-based emulsions exhibited exceedingly high temperature (20–80 °C) and pH tolerance (4–12). Flocculation occurred under high acid (pH = 2) conditions and at high ionic levels (≥ 40 mM NaCl), without causing disruption to the emulsion droplet structure. This study provided an innovative approach to preparing cellulose nanofibers with high aspect ratio, which could be utilized as emulsion stabilizers. The study also demonstrated that Pickering emulsions based on IBCNFs exhibit excellent stability and rheological properties. IBCNFs have promising potential to serve as a natural Pickering emulsifier for stabilizing oil-in-water emulsions in various food applications, cosmetic and pharmaceutical formulations.

Sustainable production of cellulose nanofibrils from Kraft pulp for the stabilization of oil-in-water Pickering emulsions

Pickering emulsions stabilized by cellulose nanofibers with tunable surface properties for thermal energy storage

Silanized modified cellulose: preparation and evaluation of O/W Pickering emulsion stabilizers

Cellulose nanofibrils-stabilized food-grade Pickering emulsions: Clarifying surface charge's contribution and advancing stabilization mechanism understanding

Residual lignin in cellulose nanofibrils enhances the interfacial stabilization of Pickering emulsions

Nanocellulose-stabilized Pickering emulsions : fabrication, stabilization, and food applications

Characterization and stability of Pickering emulsions stabilized with esterified cellulose nanofibrils

Depletion Effects and Stabilization of Pickering Emulsions Prepared from a Dual Nanocellulose System

Pickering emulsion stabilized with fibrous nanocelluloses: Insight into fiber flexibility-emulsifying capacity relations

Emulsions stabilized by nanofibers from bacterial cellulose: New potential food-grade Pickering emulsions

Cellulose nanofiber extraction from unbleached kraft pulp for paper strengthening

Formulation and stabilization of high internal phase emulsions via mechanical cellulose nanofibrils/ethyl lauroyl arginate complexes

Cellulose nanofiber from pomelo spongy tissue as a novel particle stabilizer for Pickering emulsion

Sustainable preparation of cellulose nanofibrils via choline chloride-citric acid deep eutectic solvent pretreatment combined with high-pressure homogenization

Pickering emulsions co-stabilised by cellulose nanofibres and nicotinamide mononucleotide

Stabilization of Pickering emulsions with bacterial cellulose nanofibrils (BCNFs) fabricated by electron beam irradiation

Pickering emulsion stabilized by cellulosic fibers: Morphological properties-interfacial stabilization-rheological behavior relationships

Pickering emulsions stabilized by aldehyde-modified cellulose nanofibrils: Stabilization and asphalt recovery application

Production of salad dressings via the use of economically prepared cellulose nanofiber from lime residue as a functional ingredient

Preparation of palm (Elaeis oleifera) pressed fibre cellulose nanocrystals via cation exchange resin: characterisation and evaluation as Pickering emulsifier

Pickering emulsion stabilized by palm-pressed fiber cellulose nanocrystal extracted by acid hydrolysis-assisted high pressure homogenization