Abstract:Most traditional rigid grippers can cause damage to the surface of objects in actual production processes and are susceptible to factors such as different shapes, sizes, materials, and positions of the product. This article studies a flexible finger for flexible grippers, more commonly described as PneuNet, designs the structure of the finger, discusses the processing and manufacturing methods of the flexible finger, and prepares a physical model. The influence of structural parameters such as the thickness of the flexible finger and the angle of the air chamber on the bending performance of the finger was analyzed using the Abaqus simulation tool. An RBF-PID control algorithm was used to stabilize the internal air pressure of the flexible fingers. A flexible finger stabilization experimental platform was built to test the ultimate pressure, ultimate bending angle, and end contact force of the fingers, and the simulation results were experimentally verified. The results show that when the thickness of the flexible finger is 2 mm and the air chamber angle is 0 deg, the maximum bending angle of the flexible finger can reach about 136.3°. Under the same air pressure, the bending angle is inversely correlated with the air chamber angle and finger thickness. The experimental error of the bending angle does not exceed 3%, which is consistent with the simulation results as a whole. When the thickness is 2 mm, the maximum end contact force can reach about 1.32 N, and the end contact force decreases with the increase in the air chamber angle. The RBF-PID control algorithm used has improved response speed and a better control effect compared to traditional PID control algorithms. This article provides a clear reference for the application of flexible fingers and flexible grippers, and this research method can be applied to the analysis and design optimization of other soft brakes.

Design and analysis of soft flexible gripper of robot using Taguchi-fuzzy logic analysis

Design and Simulation Experiment of Rigid-Flexible Soft Humanoid Finger

Design and Analysis of Underactuated Robotic Gripper with Adaptive Fingers for Objects Grasping Tasks.

Design and development of a soft gripper with topology optimization

A Novel Variable Stiffness Soft Robotic Gripper

Structural Design and Control Performance Study of Flexible Finger Mechanisms for Robot End Effectors

Design of a Three-Finger Underactuated Robotic Gripper Based on a Flexible Differential Mechanism.

Analysis for Material Selection of Robot Soft Finger Used for Power Grasping

Slippage control in soft finger grasping and manipulation

Theoretical Modelling of Soft Robotic Gripper with Bioinspired Fibrillar Adhesives

Design and analysis of a flexible robotic hand with soft fingers and a changeable palm

Design and Motion Analysis of Adjustable Pneumatic Soft Manipulator for Grasping Objects

A Passively Conforming Soft Robotic Gripper with Three-Dimensional Negative Bending Stiffness Fingers

Design of a Soft Pneumatic Robotic Gripper Based on Fiber-reinforced Actuator

A Robot Gripper With Variable Stiffness Actuation for Enhancing Collision Safety

Design, Fabrication, and Analysis of a Sensorized Soft Robotic Gripper

Design of a self-adaptive gripper with rigid fingers for Industrial Internet

Design and Implementation of an Underactuated Gripper with Enhanced Shape Adaptability and Lateral Stiffness Through Semi-Active Multi-Degree-of-freedom Endoskeletons

Three-Fingered Soft Pneumatic Gripper Integrating Joint-Tuning Capability

A Soft-Rigid Hybrid Gripper With Lateral Compliance and Dexterous In-Hand Manipulation

Design of an Optoelectronically Innervated Gripper for Rigid-Soft Interactive Grasping