Abstract:Most traditional rigid grippers can cause damage to the surface of objects in actual production processes and are susceptible to factors such as different shapes, sizes, materials, and positions of the product. This article studies a flexible finger for flexible grippers, more commonly described as PneuNet, designs the structure of the finger, discusses the processing and manufacturing methods of the flexible finger, and prepares a physical model. The influence of structural parameters such as the thickness of the flexible finger and the angle of the air chamber on the bending performance of the finger was analyzed using the Abaqus simulation tool. An RBF-PID control algorithm was used to stabilize the internal air pressure of the flexible fingers. A flexible finger stabilization experimental platform was built to test the ultimate pressure, ultimate bending angle, and end contact force of the fingers, and the simulation results were experimentally verified. The results show that when the thickness of the flexible finger is 2 mm and the air chamber angle is 0 deg, the maximum bending angle of the flexible finger can reach about 136.3°. Under the same air pressure, the bending angle is inversely correlated with the air chamber angle and finger thickness. The experimental error of the bending angle does not exceed 3%, which is consistent with the simulation results as a whole. When the thickness is 2 mm, the maximum end contact force can reach about 1.32 N, and the end contact force decreases with the increase in the air chamber angle. The RBF-PID control algorithm used has improved response speed and a better control effect compared to traditional PID control algorithms. This article provides a clear reference for the application of flexible fingers and flexible grippers, and this research method can be applied to the analysis and design optimization of other soft brakes.

Analysis for Material Selection of Robot Soft Finger Used for Power Grasping

Design and Simulation Experiment of Rigid-Flexible Soft Humanoid Finger

Soft Finger Model with Adaptive Contact Geometry for Grasping and Manipulation Tasks

Design Optimization of Soft Robotic Fingers Biologically Inspired by the Fin Ray Effect with Intrinsic Force Sensing

Mechanical Deformation Analysis of a Flexible Finger in Terms of an Improved ANCF Plate Element

Modeling of contact pressure distribution and friction limit surfaces for soft fingers in robotic grasping

Development of Flexible Tactile Sensor for the Envelop of Curved Robotic Hand Finger in Grasping Force Sensing

Design and analysis of soft flexible gripper of robot using Taguchi-fuzzy logic analysis

Examining the Frictional Behavior of Primitive Contact Geometries for use as Robotic Finger Pads

Theoretical Modelling of Soft Robotic Gripper with Bioinspired Fibrillar Adhesives

Analytical modeling and optimization of a corrugated soft pneumatic finger considering the performance of pinch and power grasps

An effective nonlinear dynamic formulation to analyze grasping capability of soft pneumatic robotic gripper

Finite element analysis to assess the biomechanical behavior of a finger model gripping handles with different diameters

Structural Design And Experiment Of Robotic Fingertip For Contact Sensing

Analysis of the contact interactions between fingertips and objects with different surface curvatures

Design and Analysis of Stiffness-Variable Soft Fingers with Dielectric Elastomers

Structural Design and Control Performance Study of Flexible Finger Mechanisms for Robot End Effectors

Design and Motion Analysis of Adjustable Pneumatic Soft Manipulator for Grasping Objects

A Novel Pneumatic Soft Sensor for Measuring Contact Force and Curvature of a Soft Gripper

Soft Finger Grasp Force and Contact State Estimation from Tactile Sensors