Abstract:A clear understanding of microbial sampler's ability to recover culturable bioaerosols is essential for better exposure estimate and design of future advanced samplers.This research investigated the physical and biological parameters affecting overall performance of portable microbial samplers when collecting different bioaerosol species. Seven portable samplers with impaction velocity from 1 to 15 m/s and jet-to-plate distance from 1.7 to 6 mm were used. Three bacterial and fungal species were aerosolized and collected by the samplers under controlled humidity, 40-45%. The ability of portable impactors to recover culturable bioaerosols was compared to that of an Andersen-type impactor and a Button Aerosol Sampler equipped with gelatin filter and their relative overall performance was determined.Experimental data indicated that performance of portable microbial samplers varied from model to model, and depended on investigated bioaerosol species. When sampling bacterial species, the relative overall performance of the impactors was highly correlated with their collection efficiency (adjusted R-2 = 0.74-0.94) and inclusion of samplers' jet velocity and jet-to-plate distance into multiple liner regression did not affect the adjusted R-2 values. In contrast, when sampling fungi, use of the collection efficiency in the linear regression as the sole predictor of the impactors' relative overall performance yielded adjusted R-2 values ranging from 0.61 to 0.73; inclusion of jet velocity and jet-to-plate distance into multiple liner regression increased the adjusted R-2 values to the range of 0.75-0.89. ne data demonstrate that in addition to collection efficiency, jet velocity and jet-to-plate distance also play an important role in the enumeration of bioaerosols by microbial impactors.The results from this investigation could be helpful in selecting and designing microbial samplers for assessing bioaerosol load in various environments. (C) 2006 Elsevier Ltd. All rights reserved.

Uncertainty assessment for the airborne nanoparticle collection efficiency of a TEM grid-equipped sampling system by Monte-Carlo calculation

Models for Estimating Nanoparticle Transmission Efficiency Through an Adverse Axial Electric Field

Conditional Random Surveying for Particle Deposition on a Mica Surface

Calculation of the Budget of Uncertainty on Measurements Size Nanoparticles Using Dynamic Light Scattering

Verification of Size-Resolved Population Balance Modeling for Engineered Nanoparticles under High Concentration

Global uncertainty-sensitivity analysis on mechanistic kinetic models: From model assessment to theory-driven design of nanoparticles

Aerosol Particle Collection Efficiency of Holey Carbon Film-Coated TEM Grids

Use of the Monte Carlo method for the estimation of measurement uncertainty in chemical analysis systems with intensive mathematical treatment

Uncertainty in air quality model evaluation for particulate matter due to spatial variations in pollutant concentrations

AN INFORMATION-THEORETIC FILTER SINGLE-STEP SEQUENTIAL MONTE CARLO METHOD IN PRACTICE. AN EXPERIMENTAL CASE STUDY FOR THE PARTICLE SIZE DISTRIBUTION ESTIMATION

Intercomparison of Micro- and Nanodosimetry Monte Carlo Simulations: an Approach to Assess the Influence of Different Cross-Sections for Low-Energy Electrons on the Dispersion of Results

Particle Size Determination Using TEM: A Discussion of Image Acquisition and Analysis for the Novice Microscopist

Meta-Uncertainty for Particle Image Velocimetry

Factors That Govern Sub-3 Nm Particle Measurements in an Airmodus® PSM and a TSI® DEG–SMPS

Estimation and usefulness of measurement uncertainty from sampling at different spatial scales: microns to kilometres

Assessing titanium dioxide nanoparticles transport models by Bayesian uncertainty analysis

On the Assumptions Behind Statistical Sampling: A 235U Fission Yield Uncertainty Propagation Case Study

The use of a Monte Carlo method for uncertainty calculation, with an application to the measurement of neutron ambient dose equivalent rate

Precise Analysis of Nanoparticle Size Distribution in TEM Image

Effect of Physical and Biological Parameters on Enumeration of Bioaerosols by Portable Microbial Impactors

Investigation of Cut-Off Sizes and Collection Efficiencies of Portable Microbial Samplers