Abstract:Silicon-organic solar cells based on conjugated polymers such as poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) on n type silicon (n-Si) attract wide interest because of their potential for cost-effectiveness and high-efficiency. However, a lower barrier height Phi(b) and a shallow built in potential (V-bi) of Schottky junction between n-Si and PEDOT:PSS hinders the power conversion efficiency (PCE) in comparison with those of traditional p-n junction. Here, a strong inversion layer was formed on n Si surface by inserting a layer of 1, 4, 5, 8, 9, 11-hexaazatriphenylene hexacarbonitrile (HAT-CN), resulting in a quasi p-n junction. External quantum efficiency spectra, capacitance-voltage, transient photovoltage decay and minority charge carriers life mapping measurements indicated that a quasi p-n junction was built due to the strong inversion effect, resulting in a high Phi(b) and V-bi. The quasi p-n junction located on the front surface region of silicon substrates improved the short wavelength light conversion into photocurrent. In addition, a derivative perylene diimide (PDIN) layer between rear side of silicon and aluminum cathodes was used to block the holes from flowing to cathodes. As a result, the device with PDIN layer also improved photoresponse at longer wavelength. A champion PCE of 14.14% was achieved for the nanostructured silicon-organic device by combining HAT-CN and PDIN layers. The low temperature and simple device structure with quasi p-n junction promises cost-effective high performance photovoltaic techniques.

High‐Efficiency Graphene‐Oxide/Silicon Solar Cells with an Organic‐Passivated Interface

Highly Efficient Silicon Heterojunction Solar Cells with ZnO:Al Transparent Electrode and Transition Metal Doped Indium Oxide Interfacial Layer

Efficient planar heterojunction perovskite solar cells employing graphene oxide as hole conductor.

A Polymer/Carbon‐Nanotube Ink as a Boron‐Dopant/Inorganic‐Passivation Free Carrier Selective Contact for Silicon Solar Cells with over 21% Efficiency

Graphene oxide as an effective interfacial layer for enhanced graphene/silicon solar cell performance

Interface Engineering for Efficient and Stable Chemical-Doping-free Graphene-on-silicon Solar Cells by Introducing a Graphene Oxide Interlayer

A highly efficient nano-graphite electron transport layer for high performance ZnO/Si solar cells

Binder-Free Graphene Organogels As Cost-Efficient Counter Electrodes for Dye-Sensitized Solar Cells

FeCl 3 -functionalized graphene oxide/single-wall carbon nanotube/silicon heterojunction solar cells with an efficiency of 17.5%

An 8.68% Efficiency Chemically-Doped-free Graphene-Silicon Solar Cell Using Silver Nanowires Network Buried Contacts.

High Efficiency Organic/Silicon-Nanowire Hybrid Solar Cells: Significance of Strong Inversion Layer

Breakthrough Carbon Nanotube–Silicon Heterojunction Solar Cells

Interface engineering for graphene nanowalls/silicon Schottky solar cells prepared by polymer-free transfer method

Graphene Quantum Dots Open Up New Prospects for Interfacial Modifying in Graphene/Silicon Schottky Barrier Solar Cell

Blown Bubble Assembly of Graphene Oxide Patches for Transparent Electrodes in Carbon-Silicon Solar Cells

Highly Efficient Organic/Silicon Hybrid Solar Cells with a MoO3 Capping Layer

Multifunctioning Graphene Oxide Capping Layer for Highly Efficient and Stable PEDOT:PSS-Silicon Hybrid Solar Cells

High-efficiency CNT-Si Solar Cells Based on a Collaborative System Enabled by Oxide Penetration

Solution-processable n-doped graphene-containing cathode interfacial materials for high-performance organic solar cells

Anode Modification Of Inverted Polymer Solar Cells Using Graphene Oxide

High Performance Nanostructured Silicon-Organic Quasi P-N Junction Solar Cells Via Low-Temperature Deposited Hole and Electron Selective Layer.