Abstract:Recycling is a potential solution to narrow the gap between the supply and demand of raw materials for lithium-ion batteries (LIBs). However, the efficient separation of the active components and their recovery from battery waste remains a challenge. This paper evaluates the influence of three potential routes for the liberation of LIB components (namely mechanical, thermomechanical, and electrohydraulic fragmentation) on the recovery of lithium metal oxides (LMOs) and spheroidized graphite particles using froth flotation. The products of the three liberation routes were characterized using SEM-based automated image analysis. It was found that the mechanical process enabled the delamination of active materials from the foils, which remained intact at coarser sizes along with the casing and separator. However, binder preservation hinders active material liberation, as indicated by their aggregation. The electrohydraulic fragmentation route resulted in liberated active materials with a minor impact on morphology. The coarse fractions thus produced consist of the electrode foils, casing, and separator. Notwithstanding, it has the disadvantage of forming heterogeneous agglomerates containing liberated active particles. This was attributed to the dissolution of the anode binder and its rehardening after drying, capturing previously liberated particles. Finally, the thermomechanical process showed a preferential liberation of individual anode active particles and thus was considered the preferred upstream route for flotation. However, the thermal treatment oxidized Al foils, rendering them brittle and resulting in their distribution in all size fractions. Among the three, the thermomechanical black mass showed the highest flotation selectivity due to the removal of the binder, resulting in a product recovery of 94.4% graphite in the overflow and 89.4% LMOs in the underflow product.

Challenges in the Recycling of Battery Casing Materials

Influence of the Cell Type on the Physical Processes of the Mechanical Recycling of Automotive Lithium-Ion Batteries

Recycling Lithium-Ion Battery: Mechanical Separation of Mixed Cathode Active Materials

Recycling Strategies for Spent Consumer Lithium-Ion Batteries

The Recycling of End-of-Life Lithium-Ion Batteries and the Phase Characterisation of Black Mass

Lithium-Ion Battery Recycling─Influence of Recycling Processes on Component Liberation and Flotation Separation Efficiency

A Combined Hydro-Mechanical and Pyrometallurgical Recycling Approach to Recover Valuable Metals from Lithium-Ion Batteries Avoiding Lithium Slagging

A qualitative assessment of lithium ion battery recycling processes

Industrial Recycling of Lithium-Ion Batteries—A Critical Review of Metallurgical Process Routes

Recycling of mixed cathode lithium‐ion batteries for electric vehicles: Current status and future outlook

Summary of Pretreatment of Waste Lithium-Ion Batteries and Recycling of Valuable Metal Materials: A Review

Recovering the Cathode Material Adhered to the Collector and Separator of Spent Lithium-Ion Batteries for Recycling Purposes

A Critical Review of Lithium-Ion Battery Recycling Processes from a Circular Economy Perspective

A comprehensive review and classification of unit operations with assessment of outputs quality in lithium-ion battery recycling

Toward a cell‐chemistry specific life cycle assessment of lithium‐ion battery recycling processes

Fundamentals of the recycling of spent lithium-ion batteries

Li-Ion Battery Cathode Recycling: An Emerging Response to Growing Metal Demand and Accumulating Battery Waste

Sorting, Characterization, Environmentally Friendly Recycling, and Reuse of Components from End‐of‐Life 18650 Li Ion Batteries

Recycling of End-of-Life Lithium Ion Batteries, Part I: Commercial Processes

(Invited) Science and Technology Endeavors in Lithium Ion Battery Recycling

Exploring a Green Route for Recycling Spent Lithium-Ion Batteries: Revealing and Solving Deep Screening Problem