Abstract:The interactions of femtosecond lasers with gold targets were investigated with a numerical method combining molecular dynamics (MD) and the two-temperature model (TTM). Previous works using MD-TTM method did not consider all the thermodynamic parameters and the interatomic potential dependent of the electron temperature simultaneously. Therefore, we developed a LAMMPS function to achieve this. To accurately capture the physics behind the interactions, we also included the electron blast force from free electron pressure and the modified Fourier law with steep electron temperature gradient in our model. For bulk materials, a stress non-reflecting and heat conducting boundary is added between the atomistic and the continuum parts. The modified boundary force in our study greatly reduces the reflectivity of the atomistic-continuum boundary compared with its original form. Our model is the first to consider all these factors simultaneously and manage to predict four femtosecond laser ablation phenomena observed in the experiments. In this dissertation, the thermodynamic parameters in the two-temperature model were extensively explored. We considered three different approaches to calculate these parameters: namely interpolation, ab initio calculation, and analytical expression. We found that simple interpolation between solid state and plasma state could lead to high level of inaccuracy, especially for electron thermal conductivity. Therefore, ab initio calculation and analytical expression were used for the calculation of the thermodynamic parameters in more advanced studies. The effects of electron thermal conductivity and electron-phonon coupling factor on electron and lattice temperatures were analyzed.Our studies considered electron temperature dependent (ETD) and electron temperature independent (ETI) interatomic potentials. The ETI interatomic potential is easier to implement and therefore it is used in our phase change study to investigate the effects of target thickness on melting. Homogeneous melting occurred for thin films, while melting can be observed through the movement of the solid-liquid interface in thick or bulk materials. However, the ETI potential overestimated the bond strength at high temperatures. Therefore, ablation process was studied with the ETD potential. Three ablation mechanisms were found in our simulations at different laser fluences. Short nonthermal ablation was only observed at the ablation threshold. With increasing laser fluence, spallation was then seen. In high laser fluence regime, phase explosion occurred on the surface and coexisted with spallation.Lastly, we researched on the effects of the delay time between two femtosecond laser pulses. Various delay times did not have much influence on melting depth. In low laser fluence regime, with increasing delay time, the target went through nonthermal ablation, to spallation and to no ablation. In high laser fluence regime, longer delay time encouraged phase explosion while suppressed spallation.

The influence of dynamical change of optical properties on the thermomechanical response and damage threshold of noble metals under femtosecond laser irradiation

Damage threshold evaluation of thin metallic films exposed to femtosecond laser pulses: The role of material thickness

Molecular Dynamics Simulation Of Ultra-Fast Thermal Transition In Thin Foil Irradiated By High Power Ultra-Short Laser

An Atomic-Level Study of Material Ablation and Spallation in Ultrafast Laser Processing of Gold Films

Micro- and Nanoscale Heat Transfer in Femtosecond Laser Processing of Metals

Investigation of the role of pulse duration and film thickness on the damage threshold of metal thin films irradiated with ultrashort laser pulses

Effect of optical properties on the thermal responses of copper films induced by ultrafast lasers

Melting of gold by ultrashort laser pulses: advanced two-temperature modeling and comparison with surface damage experiments

Integrated Continuum-Atomistic Modeling of Nonthermal Ablation of Gold Nanofilms by Femtosecond Lasers

Thermal response of double-layered metal films after ultrashort pulsed laser irradiation: the role of nonthermal electron dynamics

Wavelength-dependent reflectivity changes on gold at elevated electronic temperatures

PHASE CHANGE AND ABLATION STUDY OF METALS BY FEMTOSECOND LASER IRRADIATION USING HYBRID TTM/MD SIMULATIONS

The synergy of electromagnetic effects and thermophysical properties of metals in the formation of laser induced periodic surface structures

Ionization dynamics and damage conditions for transparent materials irradiated with Mid-Infrared femtosecond pulses

The impact of the substrate on the opto-thermal response of thin metallic targets following irradiation with femtosecond laser pulses

Thermal dynamics of gold nanoshell dimers under femtosecond laser pulse irradiation: A numerical approach

Theoretical and experimental study of femtosecond pulse laser heating on thin metal film

Wavelength dependence of femtosecond laser-induced damage threshold of optical materials

Combined Continuum-Atomistic Modeling of Ultrashort-Pulsed Laser Irradiation of Silicon

Ultrafast Laser Material Damage Simulation—A New Look at an Old Problem

Finite element model for femtosecond laser pulse heating using dual phase lag effect