Abstract:Purpose The paper aims to throw light on the interactions taking place between the different chemical compositions at various temperatures. P-methylacetophenone is a polar dissolvable, which is positively related by dipole–dipole co-operations and is exceptionally compelling a direct result of the shortfall of any critical primary impacts because of the absence of hydrogen bonds; hence, it might work an enormous dipole moment ( μ = 3.62 D). Alcohols additionally assume a significant part in industries and research facilities as reagents and pull in incredible consideration as helpful solvents in the green innovation. They are utilized as pressure-driven liquids in drugs, beauty care products, aromas, paints removers, flavors, dye stuffs and as a germ-free specialist. Design/methodology/approach Mixtures were prepared by mass in airtight ground stopper bottles. The mass measurements were performed on a digital electronic balance (Mettler Toledo AB135, Switzerland) with an uncertainty of ±0.0001 g. The uncertainty in mole fraction was thus estimated to be less than ±0.0001. The densities of pure liquids and their mixtures were determined using a density meter (DDH-2911, Rudolph Research Analytical). The instrument was calibrated frequently using deionized doubly distilled water and dry air. The estimated uncertainty associated with density measurements is ±0.0003 g.cm −3 . Viscosities of the pure liquids and their mixtures were determined by using Ostwald’s viscometer. The viscometer was calibrated at each required temperature using doubly distilled water. The viscometer was cleaned, dried and is filled with the sample liquid in a bulb having capacity of 10 ml. The viscometer was then kept in a transparent walled water bath with a thermal stability of ±0.01K for about 20 min to obtain thermal equilibrium. An electronic digital stop watch with an uncertainty of ±0.01 s was used for the flow time measurements for each sample at least four readings were taken and then the average of these was taken. Findings Negative values of excess molar volume, excess isentropic compressibility and positive values of deviation in viscosity including excess Gibbs energy of activation of viscous flow at different temperatures (303.15, 308.15 and 313.15 K) may be attribution to the specific intermolecular interactions through the hetero-association interaction between the components of the mixtures, resulting in the formation of associated complexes through hydrogen bond interactions. Originality/value The excess molar volume (V E ) values were analyzed with the Prigogine–Flory–Patterson theory, which demonstrated that the free volume contribution is the one of the factors influencing negative values of excess molar quantities. The Jouyban–Acree model was used to correlate the experimental values of density, speed of sound and viscosity.

Transport and acoustic properties of pentyl acetate with butanol at 298.15 K to 318.15 K: Singh model and ab-initio approach

Densities and Viscosities of Binary Mixtures of Cyclopropanecarboxylic Acid with Methanol, Ethanol, Propan-1-ol, and Butan-1-ol at Different Temperatures

Densities and Viscosities of Binary Mixtures of Methyl 4-Chlorobutyrate with Aromatic Hydrocarbons at T = (298.15 to 318.15) K

Studies on thermodynamics properties of binary mixtures of amyl acetate with propanol at T = 298.15 K to 318.15 K

Physicochemical properties, theoretical modelling and molecular interaction analysis in ternary liquid mixtures containing 1-propanol, 1,3-diaminopropane and ethyl acetate at temperature 298.15–318.15 K

Volumetric and acoustic studies of binary mixtures of n-butylamine with propanol at T = (298.15-318.15) K

Density, speed of sound, refractive index and relative permittivity of methanol, propan-1-ol or pentan-1-ol + aniline liquid mixtures. Application of the Kirkwood-Fröhlich model

Speed of Sound and Excess Properties of (ethanol + Isooctane) Binary System

Density, speed of sound, refractive index and relative permittivity of methanol, propan-1-ol or pentan-1-ol + benzylamine liquid mixtures. Application of the Kirkwood-Fröhlich model

Density, Speed of Sound, and Viscosity for Binary Liquid Mixtures of 2-(2-Ethoxyethoxy)ethanol with Methyl Acrylate, Ethyl Acrylate, or Butyl Acrylate from T = 288.15 to 318.15 K and P = 101 kPa

Study on the molecular interactions of some binary mixtures through thermodynamic properties and FT-IR spectra and correlation with the Jouyban–Acree model

Experimental and Simulation Insights into the Thermophysical Properties of Dibutyl Ether Mixed with n-Heptane and n-Octane

FT-IR studies and excess thermodynamic properties of binary mixtures at various temperatures and correlation with the Jouyban–Acree model

Physiochemical properties of the binary liquid mixtures of 2-methyl-2,4-pentanediol with selected di- and tri-chloro-substituted benzene and correlation with the Jouyban–Acree model at various temperatures

Volumetric and Viscometric Properties of Ethyl Caprate + 1-Propanol, + 1-Butanol, and + 1-Pentanol from 283.15 K to 318.15 K

Studies on Intermolecular Interactions in Binary Liquid Mixtures of 2-Methyl-1-butanol with Glycol Ethers {CH3(OCH2CH2)nOH}, n = 1,2,3 at Different Temperatures: A Volumetric, Acoustic and Transport Study

Density, Speed of Sound, and Refractive Index of Binary Mixtures of Propiophenone + (3-Amino-1-propanol, Propylamine, or Isobutanol) at Temperatures of 298.15 to 308.15 K: Modeling by Prigogine–Flory–Patterson Theory

Thermodynamic properties of ketone with 2-methyl-1-butanol/2-ethyl-1-butanol at various temperatures

Thermodynamic Properties of 1-Butanol + Ethyl Laurate Binary Mixtures by Combining Experimental Speeds of Sound with Volume Translated Peng-Robinson Equation of State

Binary Mixtures of 2-Ethyl-1-hexanol and 1, 2-Disubstituted Ethanes: Thermophysical, Ultraacoustic and Computational Studies

Molecular Interactions Studies between Methyl Methacrylate with Heptane, Decane, Dodecane, or Tridecane Using Thermodynamics and Thermoacoustic Parameters