Abstract:Purpose The paper aims to throw light on the interactions taking place between the different chemical compositions at various temperatures. P-methylacetophenone is a polar dissolvable, which is positively related by dipole–dipole co-operations and is exceptionally compelling a direct result of the shortfall of any critical primary impacts because of the absence of hydrogen bonds; hence, it might work an enormous dipole moment ( μ = 3.62 D). Alcohols additionally assume a significant part in industries and research facilities as reagents and pull in incredible consideration as helpful solvents in the green innovation. They are utilized as pressure-driven liquids in drugs, beauty care products, aromas, paints removers, flavors, dye stuffs and as a germ-free specialist. Design/methodology/approach Mixtures were prepared by mass in airtight ground stopper bottles. The mass measurements were performed on a digital electronic balance (Mettler Toledo AB135, Switzerland) with an uncertainty of ±0.0001 g. The uncertainty in mole fraction was thus estimated to be less than ±0.0001. The densities of pure liquids and their mixtures were determined using a density meter (DDH-2911, Rudolph Research Analytical). The instrument was calibrated frequently using deionized doubly distilled water and dry air. The estimated uncertainty associated with density measurements is ±0.0003 g.cm −3 . Viscosities of the pure liquids and their mixtures were determined by using Ostwald’s viscometer. The viscometer was calibrated at each required temperature using doubly distilled water. The viscometer was cleaned, dried and is filled with the sample liquid in a bulb having capacity of 10 ml. The viscometer was then kept in a transparent walled water bath with a thermal stability of ±0.01K for about 20 min to obtain thermal equilibrium. An electronic digital stop watch with an uncertainty of ±0.01 s was used for the flow time measurements for each sample at least four readings were taken and then the average of these was taken. Findings Negative values of excess molar volume, excess isentropic compressibility and positive values of deviation in viscosity including excess Gibbs energy of activation of viscous flow at different temperatures (303.15, 308.15 and 313.15 K) may be attribution to the specific intermolecular interactions through the hetero-association interaction between the components of the mixtures, resulting in the formation of associated complexes through hydrogen bond interactions. Originality/value The excess molar volume (V E ) values were analyzed with the Prigogine–Flory–Patterson theory, which demonstrated that the free volume contribution is the one of the factors influencing negative values of excess molar quantities. The Jouyban–Acree model was used to correlate the experimental values of density, speed of sound and viscosity.

Thermodynamic properties of ketone with 2-methyl-1-butanol/2-ethyl-1-butanol at various temperatures

Densities and Viscosities of Binary Mixtures of Cyclopropanecarboxylic Acid with Methanol, Ethanol, Propan-1-ol, and Butan-1-ol at Different Temperatures

Densities and Viscosities of Binary Mixtures of Methyl 4-Chlorobutyrate with Aromatic Hydrocarbons at T = (298.15 to 318.15) K

Studies on Intermolecular Interactions in Binary Liquid Mixtures of 2-Methyl-1-butanol with Glycol Ethers {CH3(OCH2CH2)nOH}, n = 1,2,3 at Different Temperatures: A Volumetric, Acoustic and Transport Study

Volumetric Properties Of Binary Mixtures Of 1-Butyl-3-Methylimidazolium Chloride Plus Water Or Hydrophilic Solvents At Different Temperatures

Excess Molar Enthalpies of Methyl Acetate and (1-Propanol, 2-Propanol, 1-Butanol, 2-Butanol, and 1-Pentanol) at T = (298.15 and 308.15) K and P = (5.0 and 10.0) MPa

Thermodynamic Insights into 3-Methyl-2-Butanol and C3–C6 1-Alkanol: Experimental Study and CPA Modeling

Integrated exploration of intermolecular interactions in 3-methyl-1-butanol and C 5 -C 8 1-alkanol mixtures via density functional theory and experimental approaches

Thermodynamic properties of P-methyl acetophenone with cyclohexylamine, cyclohexanol, and cyclohexane at various temperatures (strong and weak interactions)

Thermodynamic parameters of hexylene glycol with isomeric butanols at various temperatures

Studies on thermodynamics properties of binary mixtures of amyl acetate with propanol at T = 298.15 K to 318.15 K

Investigations on the thermo physical properties of the binary mixtures of 2-methyl-pentanediol-2,4 with n-alkanols at various temperatures (hexylene glycol with 1-octanol, 1-nonanol, 1-decanol)

Thermophysical properties: Viscosity, density, and excess properties of 2-propanol and n-Decane mixtures from 283.15 K to 343.15 K under atmospheric conditions

Analyzing Intermolecular Interactions in 2-Methyl-1-pentanol and C4-C7 1-Alkanol Mixtures: Thermodynamic and Transport Investigations

Experimental and Simulation Insights into the Thermophysical Properties of Dibutyl Ether Mixed with n-Heptane and n-Octane

Study on the molecular interactions of binary mixtures of allyl alcohol with isomeric amyl alcohol solvents through thermodynamic properties and FT-IR spectra and correlation with the Jouyban–Acree model

Experimental and Theoretical Research on Mixtures of 2-Methyl-2-butanol and 1-Alkanol (1-Hexanol to 1-Nonanol)

Excess Molar Enthalpies of Dimethyl Carbonate and (butanol Isomers and 1-Pentanol) at T = (298.15, 313.15, and 328.15) K and P = (0.1, 1.0, and 10.0) MPa

Exploring Thermophysical Properties of Butyl Lactate with Short-Chain 1-Alkanol Using Experimental and Theoretical Perspectives

Thermophysical properties of binary liquid mixtures at various temperatures, supported by FTIR spectral studies and correlation with the Jouyban–Acree model (allyl alcohol, benzyl aldehyde, benzylamine and benzyl alcohol)

Physicochemical analysis on molecular interactions in binary liquid mixtures at various temperatures and correlation with the Jouyban–Acree model (3-pentanol with allyl amine, allyl alcohol, and allyl chloride)