Interfacial Design to Enhance Photocatalytic Hydrogen Evolution via Optimizing Energy and Mass Flows
Menglong Sun,Ling Zhou,Tengguo Dong,Hengming Huang,Zhenggang Fang,Jiahui Kou,Chunhua Lu,Zhongzi Xu
DOI: https://doi.org/10.1021/acsami.1c01108
2021-04-28
Abstract:Energy and mass transfer in photocatalytic systems plays a significant role in photocatalytic water splitting, but relevant research has long been ignored. Here, an interfacial photocatalytic mode for photocatalytic hydrogen production is exploited to optimize the energy and mass flows and mainly includes a heat-insulating layer, a water-channel layer, and a photothermal photocatalytic layer. In this mode, the energy flow is optimized for efficient spreading, conversion, and utilization. A low-loss path (ultrathin water film) and an efficient heat localized zone are constructed, where light energy, especially infrared-light energy, can transfer to the target functional membrane surface with low loss and the thermal energy converted from light can be localized for further use. Meanwhile, the optimization of the mass flow is achieved by improving the desorption capacity of the products. The generated hydrogen bubbles can rapidly leave from the surface of the photocatalyst, along with the active sites being released timely. Consequently, the photocatalytic hydrogen production rate can be increased up to about 6.6 times that in a conventional photocatalytic mode. From the system design aspect, this work provides an efficient strategy to improve the performance of photocatalytic water splitting by optimizing the energy and mass flows.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c01108?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c01108</a>.Theoretical calculation and analysis, photos, EDS spectrum, transmission spectrum, other curves of hydrogen evolution, SEM images, XRD patterns, absorption spectra, and curves of temperature changes (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c01108/suppl_file/am1c01108_si_001.pdf">PDF</a>)Video S1. Bubbles growing on the membrane sample submerged in water 10 mm below the surface (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c01108/suppl_file/am1c01108_si_002.mp4">MP4</a>)Video S2. Bubbles growing on the membrane sample submerged in water 5 mm below the surface (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c01108/suppl_file/am1c01108_si_003.mp4">MP4</a>)Video S3. Bubbles growing on the membrane sample submerged in water 2 mm below the surface (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c01108/suppl_file/am1c01108_si_004.mp4">MP4</a>)Video S4. Bubbles growing on the membrane sample but taking only little pressure from water (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c01108/suppl_file/am1c01108_si_005.mp4">MP4</a>)Video S5. Hydrogen bubbles sticking on the photocatalytic membrane when the photocatalytic reaction is being carried out (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c01108/suppl_file/am1c01108_si_006.mp4">MP4</a>)This article has not yet been cited by other publications.
materials science, multidisciplinary,nanoscience & nanotechnology