Abstract:With the raise of resolution, optical payloads are becoming increasingly sensitive to satellite jitter. An approach where the entire spacecraft is pointed with great accuracy requires sophisticated and expensive bus design. In an effort to lower the overall cost of space missions that require highly stable line-of-sight pointing, a method of separating the bus and the payload with low frequency isolators is proposed. This isolation system can block the transmission of disturbance and allow relatively large bus motion. However, if the isolator is linear then there is a trade-off between isolation and static deflection as the launch and the on-orbit stage have difference requirements on the isolation frequency. Otherwise, an extra locking system should be appended to protect the payload before getting into orbit, as the STABLE isolation system[1] and the MIM isolation system[2] did. To overcome this limitation, an alternative approach is to design a nonlinear isolator with high-static stiffness during launch and low dynamic stiffness on orbit. Several specially designed nonlinear isolators have achieved low dynamic stiffness with large static load capacity. Virgin[3] considered a structure made from a highly deformed elastic element to achieve a softening spring. Platus[4] exploited the buckling of beams under axial load in a specific configuration to achieve a negative stiffness in combination with a positive stiffness, and hence low-dynamic stiffness. Others have achieved the same by connecting linear springs with positive stiffness in parallel with elements of negative stiffness[5]~[7]. In the present study, a bifunctional isolator has been developed for optical payloads. The isolator have good performance both during launch and on orbit because of its specially designed nonlinear stiffness and damping. The isolator works in a linear part with low stiffness and small damping ratio under the micro-vibration and microgravity on orbit. The transmissibility requirement and the displacement restriction during launch are satisfied by tuning the nonlinear stiffness and damping parameters. A group of sample isolators are designed tested both statically and dynamically.

WITHDRAWN: Research on interface structure integration of on-orbit maintainable optical load

Stowing Distortion of Space Optical Tilt Mirror

Design and optimization of integrated flexure mounts for unloading lateral gravity of a lightweight mirror for space application

Design of Clearance Fit Between Pico-Satellite and Its Separation Mechanism Based on Thermal-Structure Coupling

Optomechanical analysis of the mounting performance of large laser transport mirrors

Numerical Simulation on Interface Evolution and Pressurization Behaviors in Cryogenic Propellant Tank on Orbit

Theoretical and Experimental Investigations on High-Precision Micro-Low-Gravity Simulation Technology for Lunar Mobile Vehicle

Dynamic Analysis of Space Structure Deployment with Transient Thermal Load

Low-Stress Mounting Configuration Design for Large Aperture Laser Transmission Mirror

Optomechanical Analysis of the Flexure Mounting Configuration of Large-Aperture Laser Transport Mirror

Flexible support structure based on spring principle for a high precision reflecting mirror

Integrated Analysis of Line-Of-Sight Stability of Off-Axis Three-Mirror Optical System

Parameter design and experimental study of a bifunctional isolator for optical payload protection and stabilization

Off-axis Optical Bench Design for Next Generation Gravity Mission

Research on new-style flexure supports method for large-aperture transport mirror mounting

Design and Test of Small Mirror Supports for Harsh Environments

Integrated modeling and analysis of the microvibration effects on the line-of-sight stability for the space laser communication terminal

Optimal design of a Φ760 mm lightweight SiC mirror and the flexural mount for a space telescope

Optimal Design and Analysis on High Overload Buffer Structure of Passive Semi-Strapdown Inertial Navigation System.

Structural stability design of an optical mirror mount adjustment mechanism

Tilt-to-Length Coupling Analysis of an Off-Axis Optical Bench Design for NGGM