Abstract:The porous CKPC (CCS/KH560/PEI/CNT‐COOH) composite aerogels exhibited a remarkable mechanical compressive strain of 86.3%. The sensor, based on the CKPC composite aerogel, demonstrated a high sensitivity of 42.9 within a wide strain range from 60% to 76.3%. Biomass three‐dimensional composite aerogels have garnered significant attention in the realm of wearable electronic skin owing to their favorable properties, including excellent human compatibility, environmentally benign degradability, and continuous porous architecture. However, conventional biomass aerogels suffer from inadequate mechanical flexibility, susceptibility to irreversible deformation under high compressive stress, and limited reusability, thereby constraining their applicability in sensing technologies. To address these limitations, this study presents the development of porous CCS/KH560/PEI/CNT‐COOH (CKPC) composite aerogels through a freeze–drying process. Chemical crosslinking was achieved using silane coupling agent (KH560) with carboxymethyl chitosan (CCS) and polyethyleneimine (PEI), while carboxylated carbon nanotubes (CNT‐COOH) were incorporated as conductive fillers. This approach successfully overcame the issues of poor mechanical properties, low elasticity, and unbalanced sensitivity‐sensing range trade‐off in chitosan‐based aerogel sensors. The results revealed that the porous CKPC aerogels exhibited a remarkable mechanical compressive strain of 86.3% while maintaining structural integrity post‐unloading. The CKPC composite aerogel‐based sensor demonstrated a high sensitivity of 42.9 within a wide strain range of 60%–76.3%, accompanied by a stable and repeatable electrical signal response across varying strains. The porous structure of the CKPC conductive aerogel sensor holds promising applications in human motion monitoring and flexible electronics.

Versatile spider-web-like cross-linked polyimide aerogel with tunable dielectric permittivity for highly sensitive flexible sensors

Highly Sensitive Large Strain Cellulose/multiwalled Carbon Nanotubes (mwcnts)/thermoplastic Polyurethane (TPU) Nanocomposite Foams: from Design to Performance Evaluation

Ultra-stretchable and Conductive Polyacrylamide/carboxymethyl Chitosan Composite Hydrogels with Low Modulus and Fast Self-Recoverability As Flexible Strain Sensors.

Piezoelectric Polyacrylonitrile Nanofiber Film-Based Dual-Function Self-Powered Flexible Sensor.

Hyperelastic aerogels with anisotropic layer-strut cellular structure for piezoresistive sensor and compressible supercapacitor applications

Carbon Nanofibrous Aerogels Derived from Electrospun Polyimide for Multifunctional Piezoresistive Sensors

A tough, stretchable, adhesive and electroconductive polyacrylamide hydrogel sensor incorporated with sulfonated nanocellulose and carbon nanotubes

Lightweight and Mechanically Robust MXene/Polyimide/Silver Nanowire Composite Aerogels for Flexible Piezoresistive Sensors

Covalently Interconnected Thermoplastic Polymeric Nanofiber/Carbon Nanotube Composite Nanofibrous Aerogels for Piezoresistive Sensors

Flexible Strain Sensor Based on Aerogel-Spun Carbon Nanotube Yarn with a Core-Sheath Structure

MWCNTs/polyimide multilayered aerogel-based paper enabling high-temperature-resistant and flexible sensor

Highly compressible porous polyethyleneimine/chitosan composite aerogel with excellent mechanical properties as wide detection range sensors for human motion monitoring

Flexible PEDOT:PSS/polyimide aerogels with linearly responsive and stable properties for piezoresistive sensor applications

A highly stretchable carbon nanotube/reduced graphene oxide/ poly(dimethylsiloxane) composite with high thermal conductivity as a flexible strain sensor

Highly sensitive strain sensor from topological-structure modulated dielectric elastic nanocomposites

3D MXene/PEDOT:PSS Composite Aerogel with a Controllable Patterning Property for Highly Sensitive Wearable Physical Monitoring and Robotic Tactile Sensing

Flexible strain sensors with high sensitivity and large monitoring range prepared by biaxially stretching conductive polymer composites with a bilayer structure

Highly Flexible Strain Sensors Based on Polydimethylsiloxane/carbon Nanotubes (cnts) Prepared by a Swelling/permeating Method and Enhanced Sensitivity by CNTs Surface Modification

Bilayer-structured carbon nanotube/ethylene–vinyl acetate flexible strain sensors with enhanced sensing performance prepared by biaxial stretching

Flexible multifunctional graphite nanosheet/electrospun-polyamide 66 nanocomposite sensor for ECG, strain, temperature and gas measurements

Flexible and high-performance piezoresistive strain sensors based on carbon nanoparticles@polyurethane sponges