Aldobenedetto Zotti,Simona Zuppolini,Anna Borriello,Valeria Vinti,Luigi Trinchillo,Mauro Zarrelli
Abstract:In the present work, the effects of carbon-based nanofillers (0.5 wt%), i.e., graphene nanoplatelets (GNPs), carbon nanofibers (CNFs), and carbon nanotubes (CNTs), on the cryogenic temperature (77 K) mechanical properties of carbon fiber reinforced polymers (CFRPs) were investigated. The study utilized an ex situ conditioning method for cryogenic tests. The nanofillers were mixed with the epoxy matrix by a solvent-free fluidized bed mixing technique (FBM), while unidirectional carbon fibers were impregnated with the resulting nanocomposites to manufacture CFRP samples. Optical microscopy was employed to analyze the dispersion of the carbon-based fillers within the matrix, revealing a homogeneous distribution in nanocomposites containing GNPs and CNFs. Fracture toughness tests confirmed the homogeneity of the GNP-loaded systems, showing an improvement in the stress intensity factor (KC) by 13.2% and 14.7% compared to the unmodified matrix at RT (25 °C) and 77 K, respectively; moreover, flexural tests demonstrated a general increase in flexural strength with the presence of carbon-based nanofillers at both temperature levels (RT and 77 K). Additionally, interlaminar shear strength (ILSS) tests were performed and analyzed using the same ex situ conditioning method.
What problem does this paper attempt to address?
The problem this paper attempts to address is the study of the effects of different carbon-based nanofillers (i.e., graphene nanoplatelets, carbon nanofibers, and carbon nanotubes) on the mechanical properties of carbon fiber reinforced polymers (CFRPs) under low-temperature conditions (77 K). Specifically, the researchers evaluate the changes in mechanical properties, particularly fracture toughness, flexural strength, and interlaminar shear strength (ILSS), by adding these nanofillers to the epoxy resin matrix and manufacturing CFRP samples.
### Main Research Content:
1. **Selection and Preparation of Nanofillers**:
- The researchers selected three types of carbon-based nanofillers: graphene nanoplatelets (GNPs), carbon nanofibers (CNFs), and carbon nanotubes (CNTs).
- These nanofillers were uniformly dispersed in the epoxy resin matrix using solvent-free fluidized bed mixing technology (FBM).
2. **Manufacturing of Composites**:
- The epoxy resin matrix containing nanofillers was prepared using solvent-free fluidized bed mixing technology (FBM).
- These nanocomposites were combined with unidirectional carbon fibers (Toray T700 UD) to manufacture CFRP samples.
3. **Mechanical Performance Testing**:
- Mechanical performance tests, including fracture toughness tests, flexural strength tests, and interlaminar shear strength (ILSS) tests, were conducted at room temperature (25°C) and low temperature (77 K).
- The dispersion of nanofillers in the matrix was analyzed using an optical microscope.
### Research Background:
- Carbon fiber reinforced polymers (CFRPs) are widely used in aerospace, automotive, and marine engineering due to their excellent specific strength and specific modulus, as well as good chemical and thermal stability.
- Under extreme low-temperature conditions (such as 77 K), the mechanical properties of CFRPs undergo significant changes, which are crucial for their performance in applications such as liquid propellant tanks, satellite components, high-altitude aircraft, and Arctic exploration.
### Research Objectives:
- To improve the mechanical properties of CFRPs under low-temperature conditions, particularly in terms of fracture toughness and flexural strength, by adding different types of carbon-based nanofillers.
- To evaluate the dispersion effect of these nanofillers under low-temperature conditions and their impact on the mechanical properties of CFRPs.
### Research Methods:
- Preparation of nanocomposites using solvent-free fluidized bed mixing technology (FBM).
- Manufacturing CFRP samples containing nanofillers and conducting mechanical performance tests.
- Analyzing the dispersion of nanofillers using an optical microscope.
### Expected Results:
- It is expected that the addition of carbon-based nanofillers will enhance the fracture toughness and flexural strength of CFRPs under low-temperature conditions.
- To evaluate the dispersion effect of different nanofillers under low-temperature conditions and identify the optimal type and content of nanofillers.
Through this research, the authors hope to provide new modification methods and theoretical support for the application of CFRPs in low-temperature environments.