Abstract:With increasing global energy demand and stricter environmental protection requirements, energy storage technology has become a research hotspot in the global energy field. New types of energy storage devices continue to emerge owing to the continuous development of cost-effective energy storage technology. Among them, potassium-ion batteries have received widespread attention as a new type of alkali metal ion battery because of their high capacity and low cost and are considered one of the future development directions. However, the research on potassium-ion batteries is still in its infancy, with many challenges to overcome regarding practical applications. A key factor affecting the performance of potassium-ion batteries is the anode material, as it not only affects the manufacturing costs but also directly affects the power density and energy density of the battery. Traditional anode materials for lithium-ion batteries cannot meet the requirements of potassium-ion batteries. Therefore, developing high-performance anode materials suitable for potassium-ion batteries is an important research direction at present. The charge and discharge rate and cycling life of potassium-ion batteries also need further improvements. Currently, the low-rate performance, short cycle life, and unsatisfactory practical capacities limit their practical application and commercialization. However, the future of potassium-ion batteries remains promising. Upon resolving the aforementioned issues, potassium-ion batteries will have diverse application prospects, such as electric vehicles, energy storage stations, and smart grids, providing important support for solving energy problems. Therefore, the research and development of potassium-ion batteries are an important direction in the global energy field. Current research efforts are primarily focused on exploring novel anode materials with exceptional ratability and cyclability. In this regard, we synthesized a new type of anode material based on bismuth telluride (Bi2Te3) and experimentally studied its applicability in potassium-ion batteries. The performance of Bi2Te3 anode for potassium-ion batteries has been limited by its structural instability and slow electrochemical reaction kinetics. In this study, rod-like Bi2Te3 was grown on accordion-like MXene, followed by P-doping to obtain a high-performance P-Bi2Te3/MXene superstructure. This novel anode had abundant Te vacancies and good self-auto adjustable function, providing excellent cycling stability (323.1 mAh·g-1 after 200 cycles at 0.2 A·g-1) and outstanding rate capability (67.1 mAh·g-1 at 20 A·g-1). Kinetic analysis and ex situ characterization indicate that the superstructure exhibits superior pseudocapacitive properties, high electrical conductivity, favorable diffusion capability, and reversible insertion and conversion reaction mechanism.

A New Candidate in Polyanionic Compounds for Potassium Ion Battery Anode: MXene Derived Carbon Coated π‐Ti2O(PO4)2

Electrosprayed hierarchical mesoporous Mn0.5Ti2(PO4)3@C microspheres as promising High-Performance anode for Potassium-Ion batteries

First-principle Study of Ti2XS2 (X = C/N) MXenes As High Capacity Anodes for Rechargeable Potassium-Ion Batteries

Carbon-Coated Flower-Like TiO 2 Nanosphere as an Ultrastable Anode Material for Potassium-Ion Batteries: Structure Design and Mechanism Study

K2.13V1.52Ti0.48(PO4)3 as an anode material with a long cycle life for potassium-ion batteries

Regulating the PO4 and TiO6 Polyhedral Building Blocks in TiP2O7 Boosts the Potassium Ion Diffusion Kinetics

A Sb 2 S 3 Nanoflower/MXene Composite as an Anode for Potassium-Ion Batteries

Carbon Quantum Dots-Derived Carbon Nanosphere Coating on Ti 3 C 2 MXene as a Superior Anode for High-Performance Potassium-Ion Batteries

Ultrastable Organic Anode Enabled by Electrochemically Active MXene Binder toward Advanced Potassium Ion Storage

Pseudocapacitive Potassium‐Ion Intercalation Enabled by Topologically Defective Soft Carbon toward High‐Rate, Large‐Areal‐Capacity, and Low‐Temperature Potassium‐Ion Batteries

Preparation and Properties of P-Bi<sub>2</sub>Te<sub>3</sub>/MXene Superstructure-Based Anode for Potassium-Ion Battery

TiS2 As a High Performance Potassium Ion Battery Cathode in Ether-Based Electrolyte

Anion Doping for Layered Oxides with a Solid-Solution Reaction for Potassium-Ion Battery Cathodes

Conductive Co-Based Metal Organic Framework Nanostructures for Excellent Potassium- and Lithium-Ion Storage: Kinetics and Mechanism Studies

Anchoring Metal‐Organic Framework‐Derived ZnTe@C onto Elastic Ti3C2Tx MXene with 0D/2D Dual Confinement for Ultrastable Potassium‐Ion Storage

Alkalized Ti3C2 MXene Nanoribbons with Expanded Interlayer Spacing for High-Capacity Sodium and Potassium Ion Batteries

An Aliovalent‐substituted Inorganic-Open-framework Anode for High-Performance Potassium-Ion Batteries

Rational design of Sn4P3/Ti3C2Tx composite anode with enhanced performance for potassium-ion battery

Rational design of Sn 4 P 3 /Ti 3 C 2 T x composite anode with enhanced performance for potassium-ion battery

Te-vacancy-rich CoTe2− anodes for efficient potassium-ion storage

Efficient Self‐Assembly Preparation of 3D Carbon‐Supported Ti3C2Tx Hollow Spheres for High‐Performance Potassium Ion Batteries