Abstract:Potassium-ion batteries (PIBs) are prospective for energy storage systems owing to their low price and high operating voltage. Antimony-based electrode materials have the advantage of high capacity for PIBs, while suffering from huge volume expansion and inferior stability because of the large radius of K+. Therefore, developing suitable antimony-based electrode materials with high performance is highly challenging. Herein, self-assembled Sb2S3 nanoflowers on the surfaces of MXene (Ti3C2) flakes are synthesized through a solvothermal reaction along with a calcination method. The highly conductive two-dimensional Ti3C2 soft substrate could not only boost the charge transfer kinetics but also buffer the volumetric expansion of Sb2S3 effectively. In addition, the structural stability is enhanced because the Sb2S3 nanoflowers are in situ grown on Ti3C2 flakes through the strong interfacial coupling. Consequently, the Ti3C2−Sb2S3 anode exhibits a high reversible capacity of 461 mAh g–1 at 100 mA g–1, long cycling life (capacity retention of 79% for 500 cycles), and superior rate performance (102 at 2000 mA g–1). This work may provide a pathway for designing advanced materials for PIBs.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c18285?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c18285</a>.Molecular structure of Ti3AlC2 and Ti3C2; SEM images of Ti3AlC2 and Ti3C2; SEM images of pure Sb2S3; TEM images of Ti3C2; XRD image of Ti3AlC2; Raman spectra of Ti3C2–Sb2S3. Galvanostatic discharge–charge curve of Ti3C2–Sb2S3 at the first cycle; long cycling property of Ti3C2–Sb2S3 at 1000 mA g–1; table for the molar ratio of Ti, Sb, and S; table for impedance parameters.(<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c18285/suppl_file/am0c18285_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Rational design of Sn4P3/Ti3C2Tx composite anode with enhanced performance for potassium-ion battery

A high-performance tin phosphide/carbon composite anode for lithium-ion batteries

Sn 4 P 3 /TiC Composites as Li‐Ion Battery Anode with High Volumetric Capacity and Good Rate Capability

Strongly coupled Te-SnS2/MXene superstructure with self-autoadjustable function for fast and stable potassium ion storage

K2.13V1.52Ti0.48(PO4)3 as an anode material with a long cycle life for potassium-ion batteries

Regulating the PO4 and TiO6 Polyhedral Building Blocks in TiP2O7 Boosts the Potassium Ion Diffusion Kinetics

Electrosprayed hierarchical mesoporous Mn0.5Ti2(PO4)3@C microspheres as promising High-Performance anode for Potassium-Ion batteries

Metastable trigonal SnP: A promising anode material for potassium-ion battery

Carbon quantum dots/carbon-coated SnS2 as a high-performance potassium-ion battery cathode material

Carbon-Coated Flower-Like TiO 2 Nanosphere as an Ultrastable Anode Material for Potassium-Ion Batteries: Structure Design and Mechanism Study

Antimony/Polypyrrole/CNTs composites with three-dimensional structure as highly stable anodes for potassium ion battery

A Sb 2 S 3 Nanoflower/MXene Composite as an Anode for Potassium-Ion Batteries

Enhancing the Cycling Stability by Tuning the Chemical Bonding between Phosphorus and Carbon Nanotubes for Potassium-Ion Battery Anodes

Rational design of microstructure and interphase enables high-capacity and long-life carbon anodes for potassium ion batteries

A P2/P3 Biphasic Layered Oxide Composite as a High‐Energy and Long‐Cycle‐Life Cathode for Potassium‐Ion Batteries

Interconnected MnCO3 nanostructures anchored on carbon fibers with enhanced potassium storage performance

SnTe nanoparticles physicochemically encapsulated by double carbon as conversion-alloying anode materials for superior potassium-ion batteries

Heterostructure engineering of ultrathin SnS2/Ti3C2T nanosheets for high-performance potassium-ion batteries

Dynamic Reversible Evolution of Solid Electrolyte Interface in Nonflammable Triethyl Phosphate Electrolyte Enabling Safe and Stable Potassium‐Ion Batteries

Antimony Telluride Nanocomposite As a High Performance Anode for Rechargeable Potassium-Ion Batteries

Multi-geometric carbon encapsulated SnP3 composite for superior lithium/potassium ion batteries