Abstract:Composite sandwich beams with a carbon fiber reinforced polymer (CFRP) square honeycomb core were designed and fabricated by using the interlocking method. The dynamic response and failure mechanism of fully-clamped and simply- supported sandwich beams subjected to low-velocity impact were investigated experimentally and the corresponding failure modes of the sandwich beams were obtained. Meanwhile, the damage evolvement process and the failure mechanism were analyzed in detail. Influences of the impact velocity, boundary conditions, the mass distributions of face sheets and the direction of the slots on the failure modes and load-carrying capacity of the sandwich beams were explored. The low-velocity impact experiments of composites specimens with two kinds of boundary conditions were carried out by using the drop-hammer impact test system. Three kinds of initial impact velocity were considered for the simply-supported and the fully- clamped sandwich beams sandwich beams, respectively. In the experiments, the time history curves of the impact load and the midspan deflection of the specimens were recorded by a load cell and a laser displacement sensor. Meanwhile, the deformation processes of the sandwich beams were captured by a high-speed camera. The experimental results show that the directions for the slots of the long ribs have significant influence on the failure modes of the sandwich beams. The sandwich core with the upward slots at the midspan has compression deformation whilst the cracking failure along the direction of the downward slots at the midspan is observed due to the tension, which results in the face-sheet debonding and rib fracture successively. It is found that for the same mass, the design of the thicker upper face sheet can enhance the impact resistance of the sandwich beams. The peak load and load-carrying capacity of the sandwich beams increase with increasing the impact velocity. The fully-clamped boundary conditions make the sandwich beams exhibit hardening post-failure behaviors obviously. After the initial failure at the midspan, the fully-clamped ends of the cores and the face-sheets of the sandwich beams experience the fracture failure.

Dynamic response and failure mechanism characterization of composite‐metal sandwich structures under slamming impact utilizing CEL method

Numerical Studies on Failure Mechanisms of All-Composite Sandwich Structure with Honeycomb Core under Compression and Impact Loading Conditions

Residual Compressive Strength of Aluminum Honeycomb Sandwich Structures with CFRP Face Sheets after Low-velocity Impact

Damage Evolution of Sandwich Composite Structure Using A Progressive Failure Analysis Methodology

A Novel Integrated Modeling Strategy for Predicting Damage Mechanisms and Energy Dissipation of Composite Stiffened Structures under Low-Velocity Impact and Compression

Numerical Simulation of Low Velocity Impact Failure of CCF300 Carbon Fiber Laminate Based on ABAQUS

Deformation and Failure of Asymmetric Sandwich Structures under Low-Velocity Impact

A Failure Mechanism Based Model for Numerical Modeling the Compression-after-impact of Foam-Core Sandwich Panels

Mechanical Behaviors of Composite Auxetic Structures under Quasi-Static Compression and Dynamic Impact

Nonlinear analysis model of the progressive damage of aluminum–wood sandwich structures under high-speed impact conditions

Damage behavior and failure mechanism of composite sandwich panel subjected to localized impact: A comprehensive study

Explicit Dynamics Simulation and Design of Sandwich Composite Structures Reinforced by Multilayer Lattice

Numerical Analysis of the Impact Resistance of Composite A-Shaped Sandwich Structures

Sub-critical damage study of aluminium honeycomb and CFRP sandwich panels subjected to impact

Dynamic response and failure of CFRP Kagome lattice core sandwich panels subjected to low-velocity impact

Impact resistance of composite circular corrugated core sandwich structures

Low-velocity impact response and failure mechanism of CFRP sandwich beams with a square honeycomb core fabricated by the interlocking method

The impact and post-impact flexural behaviors of CFRP/aluminum-honeycomb sandwich

Behaviors of Composite Laminates under Low-Energy Impact Using a Novel Analytical Framework

Low Velocity Impact Response of Preloaded CFRP/Aluminum Honeycomb Sandwich Plate

On Influence of Face Sheet Distributions on Low-Velocity Impact Failure of Metal Honeycomb Core Sandwich Plates