Abstract:A multifunctional Li/SnS2 composite anode is rationally designed through an in situ melt‐infusion approach utilizing SnS2 as 'solute' and molten lithium as the 'solvent'. The 3D porous Li2S/Li22Sn5 framework possesses a low Li+ diffusion barrier, high electronic conductivity, and Li‐clusters decomposition capability, thus effectively eliminating the growth of dendrite and enabling ultra‐long cycling lifespan, especially at high rates. Metallic lithium is the most competitive anode material for next‐generation high‐energy batteries. Nevertheless, the extensive volume expansion and uncontrolled Li dendrite growth of lithium metal not only cause potential safety hazards but also lead to low Coulombic efficiency and inferior cycling lifespan for Li metal batteries. Herein, a multifunctional dendrite‐free composite anode (Li/SnS2) is proposed through an in situ melt‐infusion strategy. In this configuration, the 3D cross‐linked porous Li2S/Li22Sn5 framework facilitates the rapid penetration of electrolytes and accommodates the volume expansion during the repeated Li−plating process. Meanwhile, the lithiophilic Li2S phases with a low Li+ transport barrier ensure preferential Li deposition, effectively avoiding uneven electron distribution. Moreover, the Li22Sn5 electron conductors with appropriate Li+ bonding ability guarantee rapid charge transport and mass transfer. Most importantly, the steady multifunctional skeleton with sufficient inner interfaces (Li2S/Li22Sn5) in the whole electrode, not only realizes the redistribution of the localized free electron, contributing to the decomposition of Li clusters, but also induces a planar deposition model, thus restraining the generation of Li dendrites. Consequently, an unprecedented cyclability of over 6 500 h under an ultrahigh areal capacity of 10 mAh cm−2 and a current rate of 20 mA cm−2 is achieved for the prepared Li2S/Li22Sn5 composite anode. Moreover, the assembled Li/SnS2||LiFePO4 (LFP) pouch full‐cells also demonstrate remarkable rate capability and a convincing cycling lifespan of more than 2 000 cycles at 2 C.

Long‐life Quasi‐solid‐state Anode‐Free Battery Enabled by Li Compensation Coupled Interface Engineering

Li‐Rich Li2[Ni0.8Co0.1Mn0.1]O2 for Anode‐Free Lithium Metal Batteries

Air‐Stable Li2S Cathode for Quasi‐Solid‐State Anode‐Free Batteries with High Volumetric Energy

A Self‐Reconfigured, Dual‐Layered Artificial Interphase Towards High‐Current‐Density Quasi‐Solid‐State Lithium Metal Batteries

A high-energy-density and long-life initial-anode-free lithium battery enabled by a Li2O sacrificial agent

In Situ‐Constructed Multifunctional Composite Anode with Ultralong‐Life Toward Advanced Lithium‐Metal Batteries

Development of quasi-solid-state anode-free high-energy lithium sulfide-based batteries

A Sustainable Solid Electrolyte Interphase for High‐Energy‐Density Lithium Metal Batteries under Practical Conditions

Scalable fabrication of ultra-fine lithiophilic nanoparticles encapsulated in soft buffered hosts for long-life anode-free Li2S-based cells

Integrating Prelithiation and Interface Protection to Achieve High‐Energy All‐Solid‐State Batteries

Armoring lithium metal anode with soft–rigid gradient interphase toward high-capacity and long-life all-solid-state battery

Ultra-homogeneous Dense Ag Nano Layer Enables Long Lifespan Solid-State Lithium Metal Batteries

Stable all-solid-state lithium metal batteries enabled by ultrathin LiF/Li3Sb hybrid interface layer

Anode‐Free Lithium Metal Batteries Based on an Ultrathin and Respirable Interphase Layer

A Coaxial‐Interweaved Hybrid Lithium Metal Anode for Long‐Lifespan Lithium Metal Batteries

Prolonged lifespan of initial-anode-free lithium-metal battery by pre-lithiation in Li-rich Li2Ni0.5Mn1.5O4 spinel cathode

Solid‐State Lithium Metal Batteries with Extended Cycling Enabled by Dynamic Adaptive Solid‐State Interfaces

Integrated lithium metal anode protected by composite solid electrolyte film enables stable quasi-solid-state lithium metal batteries

A safe anode-free lithium metal pouch cell enabled by integrating stable quasi-solid electrolytes with oxygen-free cathodes

Ultralong-Life Quasi-Solid-State Li-O-2 Batteries Enabled by Coupling Advanced Air Electrode Design with Li Metal Anode Protection

High-entropy metal oxide containing hybrid electrolyte for long-life Li-metal batteries