Abstract:With the rapid consumption of shallow coal resources, the depth of shaft lining construction continues to increase; huge formation pressure and complex geological conditions make the stress condition of shaft lining become more complex. The concrete strength grade is usually enhanced to improve the bearing capacity of shaft lining; however, high strength grades bring high brittleness. In order to solve the problem of high brittleness of high-strength concrete shaft lining in ultra-deep mine construction, a steel-polypropylene hybrid fiber high-performance reinforced concrete (SPHFRC) shaft model was developed. The SPHFRC with various mix proportions was prepared by optimizing the fiber content. The mechanical properties of SPHFRC were tested and compared with the reference concrete (PHSC). The results show that the SPHFRC can be obtained by adding the volume fraction in 1.2% steel fiber and 1.0% polypropylene fiber, which increases the tensile strength by 27.5% and the compressive strength of SPHFRC was similar to the reference concrete. By introducing a new brittleness evaluation index B to evaluate the brittleness of concrete, the results show the fiber greatly improves the brittleness problem of PHSC. Afterwards, a model test of PHSC and SPHFRC shaft lining was conducted, and the circumferential and axial load-stress-strain curves and load-displacement curves of concrete and steel bars are analyzed. Combining the failure characteristics of the two shaft lining models, the following conclusions are obtained: The ultimate bearing capacity of PHSC shaft lining is hardly affected by fibers, but the hoop displacement is significantly reduced and the circumferential stability of shaft lining has been greatly improved, the initial cracks appeared late, the speed of crack’s propagation is reduced, and no obvious concrete peeling and separation appeared during damage. The comprehensive performance of SPHFRC shaft lining is excellent, which has better ductility and anti-deformation ability.

Mechanical Damage and Failure Behavior of Shaft-Lining Concrete after Exposure to High Pore-Water Pressure

Mechanical Damage and Failure Behavior of Shaft-Lining Concrete after Exposure to High Pore-Water Pressure

Experimental Study on Damage Breakage Properties of Shaft Lining Concrete under Hydromechanical Coupling

Analysis of Shaft Lining Water Irruption Mechanism in Coal Mine Based on Fluid-Solid Coupling Theory

Mechanical behavior and constitutive model of lining concrete in triaxial compression infiltration process under pore water pressure

Mechanism of permeability evolution under stress-seepage coupling in concrete for drilling shaft lining of water-rich weakly cemented formations

Experimental study of concrete damage under high hydrostatic pressure

Investigation on the Influence of High-Pressure Water Environment on Fracture Performance of Concrete

Effect of water pressure on mechanical behavior of concrete under dynamic compression state

Experimental study on the high water pressure erosion mechanism and its influence on the submarine shield tunnel concrete segments

Comparative Analysis of Microdamage-affected Chloride Transport in Concrete under Static and Dynamic Hydraulic Pressure

Investigation on the Fracture Toughness of Concrete-Rock Interface Damaged by High-Pressure Water Environment

Experimental study on the acoustic emission response and permeability evolution of tunnel lining concrete during deformation and failure

Experimental Study on Direct Shear Performance of Concrete-Concrete Interface of Prefabricated Structure Sleeve Grouting Connection

Experimental Investigation on Mechanical and Damage Properties of Single Fractured Coal Subjected to Water Pressure and Triaxial Compression

A novel method of imposing external water pressure to explore the failure behavior of railway tunnel linings

Fluid-solid coupling response of shield tunnel lining structure under high water pressure

Experimental Study on Mechanical Properties of Polypropylene: Steel Fiber Concrete and Loading Characteristics of Shaft Lining

Model test on the behavior of tunnel linings under earth pressure conditions and external water pressure

Dynamic mechanical responses and failure characteristics of fractured rocks with hydrostatic confining pressures: An experimental study